2011 NISSAN GT-R navigation system

Black plate (96,1)
Model "R35-N" EDITED: 2009/ 10/ 30
7. The icon displayed on the map screen isswitched, and the travel time to the waypoint
is displayed.
Displayed icon
:Displayofthetraveltimetothe
destination:Displayofthetraveltimetothewaypoint
Set average speedsThe required time to the destination can be
calculated based on the set vehicle speeds.1. Push .
2. Highlight [Navigation] and push .
3. Highlight [Guidance Settings] and push .
4. Highlight [Others] and push .
5. Highlight [Set Average Speeds] and push .
6. Highlight the preferred item and push .
7. Use the main directional buttons or the center dial to make an adjustment. The
speed can be increased/decreased by 5
MPH (5 km/h) .
8. After finishing the setting, push or
to activate the setting.
9. Push to return to the previous
screen. Push

Black plate (102,1)
Model "R35-N" EDITED: 2009/ 10/ 30
.The tracked route is stored in the first
available position number in the store
tracking list.Other settingsA tracked route can also be stored using the
following procedure.1. Push .
2. Highlight [Navigation] and push .
3. Highlight [Address Book] and push TER>.
4. Highlight [Stored Tracking] and push TER>.
5. Highlight [Add New] and push .
INFO:
A tracked route can only be stored using the
setting screen when [Current Tracking] is set to
on.
STORING AVOID AREAAn Avoid Area can be stored.
The Avoid Area is an area that can be excluded
from a route, such as a road that is always
congested. Once Avoid Areas are stored, the
system avoids those areas when calculating a
route. Up to 10 Avoid Areas can be stored.
1. Push .2. Highlight [Navigation] and push .
3. Highlight [Address Book] and push TER>.4. Highlight [Avoid Area] and push .
2-76
Navigation

Black plate (103,1)
Model "R35-N" EDITED: 2009/ 10/ 30
5. Highlight [Add New] and push.
INFO:
A maximum of 10 Avoid Areas can be
stored.
When 10 Avoid Areas are already stored, a
new Avoid Area cannot be stored until a
currently stored Avoid Area is deleted.“DELETING STORED ITEM” page 2-
88
6. Highlight the appropriate method to search for a location and push .
“SETTING DESTINATION” page 2-23
7. Set the following items for the searched
location.
Available setting items:
.[Rename]:
Changes the name.
“Rename” page 2-86
. [Move Location]:
Adjusts the location of the Avoid Area.“Move Location” page 2-87
. [Resize Area]:
Adjusts the range of the Avoid Area.“Resize Area” page 2-87
. [FWY]:
Avoids Freeways.“FWY” page 2-87 .
[Delete]:
Deletes the avoid area.
“Delete” page 2-88
8. After finishing the setting, highlight [OK] and push .
EDITING ADDRESS BOOKItems stored in the Address Book can be
modified. These settings can be edited to make
the navigation system more useful.Basic operation1. Push .
2. Highlight [Navigation] and push .
3. Highlight [Address Book] and push TER>.
4. Highlight the preferred item and push .
Navigation
2-77

Black plate (105,1)
Model "R35-N" EDITED: 2009/ 10/ 30
1. Push.
2. Highlight [Address Book] and push TER>.
3. Highlight [Store/Edit] and push .
Minor adjustment of home or stored
addressWhen [Edit] is selected, you can edit the
following items of the home or stored location
can be edited.
.[Show Icon on Map]:
. [Name] (only for stored locations):
. [Voicetag] (only for stored locations):
. [Icon]:
. [Sound]:
. [Direction]:
. [Distance]:
. [Phone No.]:
. [Group] (only for stored locations):
. [Entry Numbers] (only for stored locations):
Show Icon on Map:Displays the home icon or the stored address
icon on the map.1. Highlight [Show Icon on Map] and push
.
2. The indicator illuminates when the item is set. Then the system displays the icon on
the map.
Navigation
2-79

Black plate (106,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Name (only for stored locations):Changes the name of a stored location.1. Highlight [Name] and push.
A character input screen is displayed.2. Enter the preferred name for the stored location.
“HOW TO INPUT LETTERS AND
NUMBERS” page 1-16
3. Highlight [OK] and push .
The name is stored.
Voicetag (only for stored locations):1. Highlight [Voicetag] and push .2. Highlight [Store] and push .
3. A beep sounds, and the system enters the
voice command reception mode.
4. Speak the name/word to be used as Voicetag.
5. The Voicetag is stored, provided the system recognizes it.
INFO:
. A Voicetag cannot be stored, overwritten or
played while driving.
. The Address Book can store up to 100
Voicetags.
. Highlight [Play] to confirm the stored Voice-
tag.
. Highlight [Delete] to delete a stored Voice-
tag.
2-80
Navigation

Black plate (108,1)
Model "R35-N" EDITED: 2009/ 10/ 30
2. Set the direction that sounds the alarm andpush .
The selected direction is set.
INFO:
After the direction is set and [Direction] is
selected and set again, a confirmation message
is displayed. Confirm the contents of the
message, highlight [Yes] and push .
The set direction is overwritten.
Distance:Sets the alarm to sound when reaching a
specific distance to the home or stored address.1. Highlight [Distance] and push .
2. Highlight the preferred distance option and
push . The indicator of the
selected distance illuminates.
Available distance options:
. 150 feet (50 m)
. 300 feet (100 m)
. 1000 feet (300 m)
. 1500 feet (500 m)
INFO:
Once the direction and the distance to sound an
alarm are set, the system will sound the alarm
when the vehicle enters the triggering zone.
Phone number:Stores the telephone number of the home or a
stored location.
1. Highlight [Phone No.] and push .
The telephone number entry screen is
displayed.2. Enter the telephone number of the home or
stored location.
“NUMBER INPUT SCREEN” page 1-
17
3. Highlight [OK] and push .
The telephone number is stored.
2-82
Navigation

Black plate (110,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Editing stored route1. Highlight [Stored Routes] and push TER>.
2. Highlight the preferred stored route and push .3. Highlight the preferred item to edit from the
list on the right side of the screen and push
.
4. After finishing the editing, highlight [OK] and push .
INFO:
If [Store Current Route] is selected, the system
stores the current route.
Available setting items
. [Rename]:
Changes the name.“CHARACTER (letters and numbers)
INPUT SCREEN” page 1-16
. [Replace]:
Overwrites the stored route to the current
route.
. [Delete]:
Deletes the stored route.
. [OK]:
Applies the settings.
Editing stored tracking1. Highlight [Stored Tracking] and push TER>.
2. Highlight the stored tracked route and push . When the “ON” indicator is not
illuminated, push . The indicator
illuminates, and the Edit screen is displayed.
If is pushed while the “ON”
indicator is illuminated, the indicator turns
off.
2-84
Navigation

Black plate (114,1)
Model "R35-N" EDITED: 2009/ 10/ 30
INFO:
If the current vehicle location is set to an Avoid
Area, the system will not provide route guidance.
Delete:Deletes the Avoid Area.1. Highlight [Delete] and push .2. A confirmation message is displayed. Con-
firm the contents of the message, highlight
[Yes] and push . The stored item
is deleted from the Address Book.
DELETING STORED ITEMThe locations and routes in the Address Book
can be deleted. Two deletion methods are
available: deleting an individual item and delet-
ing all stored items.
NOTICE
Deleted items cannot be restored. Be-
fore deleting an item, always make sure
that the item is truly not necessary.Deleting stored item individuallyYou can delete stored addresses, routes, track-
ing and avoid areas individually.1. Push .
2. Highlight [Navigation] and push .
3. Highlight [Address Book] and push TER>.
Example: [Stored Location] is highlighted.
4. Highlight the preferred item for deletion and push .
2-88
Navigation