2011 LEXUS RX350 display

222
2-4. Using other driving systems
The distance display and buzzer
When a sensor detects an obstacle, the direction of and the approximate
distance to the obstacle are displayed and the buzzer sounds.
nFront corner sensors
nRear corner sensors
Detection
level
Multi-information
display
Approximate dis-
tance to obstacleBuzzer
22.0 to 1.6 ft.
(60 to 47.5 cm)Medium
31.6 to 1.2 ft.
(47.5 to 35 cm)Fast
41.2 ft. (35 cm) or
lessContinuous
Detection
level
Multi-information
display
Approximate dis-
tance to obstacleBuzzer
21.6 to 1.2 ft.
(50 to 37.5 cm)Medium
31.2 to 0.8 ft.
(37.5 to 25 cm)Fast
40.8 f t. (25 cm) or
lessContinuous

223
2-4. Using other driving systems
2

When driving
nRear center sensors
Detection
level
Multi-information
display
Approximate dis-
tance to obstacleBuzzer
1 4.9 to 2.0 ft.
(150 to 60 cm)Slow
22.0 to 1.5 ft.
(60 to 45 cm)Medium
31.5 to 1.2 ft.
(45 to 35 cm)Fast
41.2 ft. (35 cm) or
lessContinuous

226
2-4. Using other driving systems
nCustomization
Settings (e.g. buzzer volume) can be changed. (Customizable features →P. 6 2 1 )
CAUTION
nCaution when using the intuitive parking assist
Observe the following precautions.
Failing to do so may result in the vehicle being unable to be driven safely and possi-
bly cause an accident.
lDo not use the sensor at speeds in excess of 6 mph (10 km/h).
lDo not attach any accessories within the sensor range.
NOTICE
nNotes when washing the vehicle
Do not apply intensive bursts of water or steam to the sensor area.
Doing so may result in the sensor malfunctioning.
nConditions possibly indicating system malfunctions
If any of the following occurs, the system may be malfunctioning due to a sensor fail-
ure etc. Have the vehicle inspected by your Lexus dealer.
lThe buzzer does not sound when the intuitive parking assist mode is set.
lThe sensor operation display flashes and the buzzer sounds even when no obsta-
cle is detected.
lAn area of the sensors is hit or subjected to a strong impact.
lEither bumper is hit.
lThe sensor operation display remains on even though no buzzer sounds.

227
2-4. Using other driving systems
2

When driving Rear view monitor system (rea r view mirror-attached type)
∗
The rear view monitor system assists the driver by displaying an image of
the area behind the vehicle. The image is displayed in reverse on the
screen. This reversed image is a similar image to the one on the inside rear
view mirror.
The rear view image is displayed
when the shift lever is in the R
position.
If the shift lever is shifted out of
R, the screen is turned off.
∗: If equipped

228
2-4. Using other driving systems
nThe rear view monitor system can be operated when
The “ENGINE START STOP” switch is in IGNITION ON mode and the back door
is fully closed.
nSwitching the screen on/off
nDisplayed area
When the screen is displayed, press the
“AUTO” button on the inside rear view mirror
to switch the screen on/off
Screen on: Green indicator comes on.
Screen off: Orange indicator comes on.
The auto anti-glare inside rear view mirror
will revert to the screen on each time the
“ENGINE START STOP” switch to the
IGNITION ON mode.
The area covered by the camera is limited.
Objects that are close to either corner of
the bumper or under the bumper cannot
be seen on the screen.
The area displayed on the screen may vary
according to vehicle orientation or road
conditions.
Corners of bumper

230
2-4. Using other driving systems
CAUTION
nWhen using the rear view monitor system, observe the following precautions to
avoid an accident that could result in death or serious injuries:
lNever depend solely on the monitor system when reversing.
lAlways check visually and with the mirrors to confirm your intended path is clear.
lDepicted distances between objects and flat surfaces differ from actual dis-
tances.
nConditions which may affect the rear view monitor system
lIf the back of the vehicle has been hit, the camera’s position and mounting angle
may have changed. Have the vehicle inspected by your Lexus dealer.
lRapid temperature changes, such as when hot water is poured on the vehicle in
cold weather, may cause the system to function abnormally.
lIf the camera lens is dirty, it cannot transmit a clear image. Rinse with water and
wipe with a soft cloth. If extremely dirty, wash with a mild cleanser and rinse.
lThe displayed image may be darker and moving images may be slightly distorted
when the system is cold.

233
2-4. Using other driving systems
2

When driving
Disabling the TRAC/VSC systems
If the vehicle gets stuck in fresh snow or mud, the TRAC/VSC systems
may reduce power from the engine to the wheels. You may need to turn
the system off to enable you to rock the vehicle in order to free it.
nTurning off the TRAC system only
To turn the TRAC system off,
quickly press and release the
switch.
A message will be shown on the
multi-information display.
Press the switch again to turn the
system back on.
nTurning off both TRAC and VSC systems
To turn the TRAC and VSC sys-
tems off, press and hold the switch
for more than 3 seconds while the
vehicle is stopped.
A message will be shown on the
multi-information display and VSC
off indicator light will come on.
Press the switch again to turn the
systems back on.

274
3-1. Using the air conditioning system and defogger
Automatic air conditioning system
Air outlets and fan speed are automatically adjusted according to the tem-
perature setting.
Vehicles with a navigation system
Owners of models equipped with a navigation system should refer to
the “Navigation System Owner’s Manual”.
Vehicles without a navigation system
Automatic
mode
button
Driver’s side temperature
display
Air outlet selector button
Fan speed
control
button/
“OFF” button
Air outlet displayFan speed display
Passenger’s side temperature
display
Driver's side temperature
control buttons
Cooling and dehumidification function
on/off button
Outside/recirculated air mode button
Windshield defogger
button
Passenger’s side temperature control buttons
Dual mode
button