2011 LEXUS RX350 display

312
3-2. Using the audio system
Repeat play
nRepeating a file
Press .
To cancel, press again.
nRepeating all the files in a folder
Press and hold until you hear a beep.
To cancel, press again.
Switching the display
Press .
Each time the button is pressed, the display changes in the following order:
Folder no./File no./Elapsed time → Folder name → File name → Album title
(MP3 only) → Track title → Artist name

313
3-2. Using the audio system
3

Interior features
nCD player protection feature
→P. 3 0 3
nDisplay
→P. 3 0 3
nWhen “ERROR”, “WAIT” or “NO MUSIC” is shown on the display
“ERROR”: This indicates a problem either in the CD or inside the player. The CD
may be dirty, damaged, or inserted up-side down.
“WAIT”: This indicates that operation is stopped due to a high temperatures inside
the player. Wait for a while and then press . If the CD still cannot be
played back, contact your Lexus dealer.
“NO MUSIC”: This indicates that an MP3/WMA file is not included in the CD.
nDiscs that can be used
→P. 3 0 4
nLens cleaners
→P. 3 0 4
nIf discs are left inside the CD player or in the ejected position for extended peri-
ods of time
→P. 3 0 4

320
3-2. Using the audio system
nPlay mode list
nSelecting a list
Turn to display the first selection list.
Press to select the desired item.
Pressing the knob changes to the second selection list.
Repeat the same procedure to select the desired song name.
To return to the previous selection list, select “GO BACK” or press
.
Play modeFirst
selection
Second
selection
Third
selection
Four th
selection
“PLAYLISTS”Playlists selectSongs select--
“A R T I S T S ”Artists selectAlbums selectSongs select-
“A L B U M S ”Albums selectSongs select--
“SONGS”Songs select---
“PODCASTS”
Albums selectSongs select--
“GENRES”Genre selectArtists selectAlbums selectSongs select

“COMPOSERS”
Composers
selectAlbums selectSongs select-

“AUDIOBOOKS”
Songs select---
STEP1
STEP2
STEP3

321
3-2. Using the audio system
3

Interior features
Selecting songs
Turn or press “∧” or “∨” on to select the desired song.
Playing and pausing songs
To play or pause a song, press .
Fast-forwarding and rewinding songs
To fast-forward or rewind, press and hold “∧” or “∨” on until you
hear a beep.
Shuffle playback
nPlaying songs from one playlist or album in random order
Press .
To cancel, press again.
nPlaying songs from all the playlists or albums in random order
Press and hold until you hear a beep.
To cancel, press again.
Repeat play
Press .
To cancel, press again.
Switching the display
Press .
Each time the button is pressed, the display changes in the following order:
Elapsed time → Album title → Tr a c k t i t l e → Artist name

322
3-2. Using the audio system
Adjusting sound quality and volume balance
Press to enter iPod menu mode.
Pressing changes sound modes. (→P. 335)
nAbout iPod
lApple is not responsible for the operation of this device or its compliance with
safety and regulatory standards.
liPod is a trademark of Apple Inc., registered in the U.S. and other countries.
niPod functions
lWhen an iPod is connected and the audio source is changed to iPod mode, the
iPod will resume play from the same point in which it was last used.
lDepending on the iPod that is connected to the system, certain functions may
not be available. If a function is unavailable due to a malfunction (as opposed to
a system specification), disconnecting the device and reconnecting it once
again may resolve the problem.
lWhile connected to the system, the iPod cannot be operated with its own con-
trols. It is necessary to use the controls of the vehicle’s audio system instead.
niPod problems
To resolve most problems encountered when using your iPod, disconnect your iPod
from the vehicle iPod connection and reset it.
For instructions on how to reset your iPod, refer to your iPod Owner's Manual.
nDisplay
→P. 3 0 3
STEP1
STEP2

328
3-2. Using the audio system
Fast-forwarding and rewinding files
To fast-forward or rewind, press and hold “∧” or “∨” on until
you hear a beep.
Random playback
nPlaying files from a folder in random order
Press .
To cancel, press again.
nPlaying all the files from a USB memory in random order
Press and hold until you hear a beep.
To cancel, press again.
Repeat play
nRepeating a file
Press .
To cancel, press again.
nRepeating all the files in a folder
Press and hold until you hear a beep.
To cancel, press again.
Switching the display
Press .
Each time the button is pressed, the display changes in the following order:
Elapsed time → Folder name → File name → Album title → Track title →
Artist name

329
3-2. Using the audio system
3

Interior features
nUSB memory functions
lDepending on the USB memory that is connected to the system, the device
itself may not be operable and certain functions may not be available. If the
device is inoperable or a function is unavailable due to a malfunction (as
opposed to a system specification), disconnecting the device and reconnecting
it once again may resolve the problem.
lIf the USB memory still does not begin operation after being disconnected and
reconnected, format the memory.
nDisplay
→P. 3 0 3
nRouting portable audio device cables
→P. 3 2 3
nError messages
“ERROR”: This indicates a problem in the USB memory or its connection.
“NO MUSIC”: This indicates that no MP3/WMA files are included in the USB
memory.

334
3-2. Using the audio system
Optimal use of the audio system
Displays the current mode
Changes the following set-
tings: