When you have found your ideal driving
position, the vehicle can memorise the settings
for future use.
1.Press the Mbutton. The red LED will
illuminate for a five second period.
2. Press button 1,2, or \fto store your driving
position.
The LED will extinguish and a chime will sound
to confirm that the settings have been
memorised. If the ignition is on, the message
center will display a confirmation message.
5
Operating note
A seat position will only be memorised during the
five second period that the LED is illuminated.
An existing memory setting can be over\bwritten
with a new memory position.
Driving position memory
Recalling a seat position
To recall a memorised seat position simply
press and hold button 1,2, or \funtil the seat
has finished moving.
Convertible top
The vehicle must be stationary with the engine
running.
Note: The luggage separator MUST be in the
correct position before the top will retract.
• To open, press and hold the REAR of switch 1
in the overhead console.
An audible chime indicates start of opening.
Rear windows will open, the top unlatches and
starts to move. Front windows will fully lower.
When the process is complete another audible
chime will be given.
• Release the switch.
• To close, press and hold the FRONT of switch 1.
Convertible top operation
• DO NOT press the engine START STOP
button while the top is operating. Doing so will
cause the system to lose its position memory.
• DO NOT operate the top while the vehicle is in motion. Doing so may damage the top and/or its
operating mechanism.
• DO NOT open the trunk while the top is operating. This will cause the operation to stop.
Once again an audible chime is given and the
windows will lower before the roof moves back
into position. When the process is complete
another audible chime will be given.
• Release the switch.
jjm 18 96 30 101:XK NAS 10MY.qxd 04/09/2008 15:23 Page 5 1
