2011 JAGUAR XK ignition

3
Opening the trunk
Engine start stop
TheSTART STOP button is operational only
when the Jaguar Smart Key is inside the
vehicle.
Ignition only on:
• A single press of the START STOP
button will switch on the ignition.
• A second press will switch off the ignition.
Engine start:
• With the footbrake depressed and the gear selector in Park, press and release the
START STOP button to start the engine.
The JaguarDrive Selector will rise from the
center console in readiness for gear selection.
• With the gear selector in Park, press the
button again to stop the engine and switch off
the ignition.
Cold climate starting
In extreme low temperatures, there may be a
delay of up to \f2 seconds between the START
STOP button being pressed and the engine
cranking. Ensure the footbrake remains
depressed. Do NOT press the START STOP
button again. Cranking time will be increased.
Operating note
The START STOP button must be pressed to stop
the engine. If not, it will continue to run even if the
Jaguar Smart Key is removed from the vehicle.
1. Press the release button indicated.
Front windows
The front windows can be fully opened or closed
with a single operation of the switch.
• To open a window, press the respective
switch briefly. Press the switch again to stop
the window from fully opening.
• To close a window, pull the switch up briefly. Pull the switch again to stop the window from
fully closing.Reminder Global closing
If a front window has been left open when leaving
the vehicle and global closing is enabled, press
and hold the Jaguar Smart Key lock button to close
them. Alternatively, press and hold the button on
the door handle.
2. Alternatively, press the button on the facia.
jjm 18 96 30 101:XK NAS 10MY.qxd 04/09/2008 15:23 Page 31 2

When you have found your ideal driving
position, the vehicle can memorise the settings
for future use.
1.Press the Mbutton. The red LED will
illuminate for a five second period.
2. Press button 1,2, or \fto store your driving
position.
The LED will extinguish and a chime will sound
to confirm that the settings have been
memorised. If the ignition is on, the message
center will display a confirmation message.
5
Operating note
A seat position will only be memorised during the
five second period that the LED is illuminated.
An existing memory setting can be over\bwritten
with a new memory position.
Driving position memory
Recalling a seat position
To recall a memorised seat position simply
press and hold button 1,2, or \funtil the seat
has finished moving.
Convertible top
The vehicle must be stationary with the engine
running.
Note: The luggage separator MUST be in the
correct position before the top will retract.
• To open, press and hold the REAR of switch 1
in the overhead console.
An audible chime indicates start of opening.
Rear windows will open, the top unlatches and
starts to move. Front windows will fully lower.
When the process is complete another audible
chime will be given.
• Release the switch.
• To close, press and hold the FRONT of switch 1.
Convertible top operation
• DO NOT press the engine START STOP
button while the top is operating. Doing so will
cause the system to lose its position memory.
• DO NOT operate the top while the vehicle is in motion. Doing so may damage the top and/or its
operating mechanism.
• DO NOT open the trunk while the top is operating. This will cause the operation to stop.
Once again an audible chime is given and the
windows will lower before the roof moves back
into position. When the process is complete
another audible chime will be given.
• Release the switch.
jjm 18 96 30 101:XK NAS 10MY.qxd 04/09/2008 15:23 Page 5 1

Manual gear changes
The steering wheel paddles allow manual gear
changing with eitherDrive orSport selected.
• To shift down, briefly pull the paddle.
• To shift up, briefly pull the +paddle.
When the paddles are used in Drive, gear
selection will revert to automatic mode if use of
the paddles is not maintained.
With Sport selected, continuous manual
operation is initiated if the paddles are used.
In both Dand Smode, automatic operation can
be reinstated by pulling the +paddle for two
seconds.
9
Electric parking brake
• Apply manually when stationary in Park,Drive
or Reverse by pulling up the parking brake
switch.
• Can be manually released when the engine is running and the foot brake is applied. Press
the parking brake switch down to release.
• If manually applied whilst in Drive orReverse,
the parking brake will automatically
release when the accelerator is applied.
• Releases automatically when the gear selector is moved from Park.
Transmission
Gearshift interlock
The ignition must be on and the footbrake
depressed before the selector can be rotated
from thePark position. Maintain brake pressure
until a gear is selected.
Instrument pack message center
The current gear selection will be displayed at
the top of the message center.
Sport mode
To move from Drive toSport, press the gear
selector down and rotate. Automatic gear
changing continues but the gearshift points are
modified for full use of the engine's power.
Do NOT use the recess in the electric parking
brake as a storage area.
If the engine is switched off with Neutral selected,
automatic selection of Pis delayed for \f0 minutes.
Do NOT use this feature during vehicle recovery.
jjm 18 96 30 101:XK NAS 10MY.qxd 04/09/2008 15:24 Page 9 PR NDS
START
ENGIN E
STOP

\f2
Touchscreen and Audio
AM\bFM radio
From the touch\bscreen menu, selectAudiothen
AM\bFM. Subsequent touches of AM\bFMwill
scroll through FM1, FM2andAM.
Use the Seek Up or Seek Down controls to
manually find stations. Touch and hold any of the
nine station preset buttons to store a station.
Alternatively, touch and hold the Autostoreicon.
Autostore can automatically select and store up
to nine stations. Touch any preset button to
listen to a stored sation.
Touch Settings for additional tuner features and
sound settings.
Many screens feature the icon in the
bottom right corner. Touch this icon to return to
the previous screen.
Satellite radio
Satellite radio is a subscription service. To
activate and use the satellite radio, call the
satellite radio service provider (Sirius). Provide
them with the Sirius ID of the audio unit. The
Source button (item 3) will display Sat Radioin
place of HD Radio.
Subscribing to Sirius
1. Select Sat Radio.
2. If you are not currently subscribed to SIRIUS,
the system will automatically tune to the
preview channel (Ch\f84) and details for
subscribing will be shown on the screen.
\f. The vehicle must be outside.
4. Ensure that the ignition is on, preferably with
the engine running and you have a good
reception of Ch\f84.
5. Call Sirius on a phone that is NOT docked to
the vehicle.
6. Provide Sirius with your SIRIUS ID, details of
the subscription package you require and
payment details.
7. The authorisation and activation process can
take up to 35 minutes.The touch\bscreen requires only light touches.
Excess pressure could result in damage.
1.Press to switch audio on/off. Rotate for
volume.
2. Press repeatedly for screen on/off and
screen saver options.
\f. Press repeatedly for FM1,FM2, AM, HD
Radio ,CD, USB andiPod.
4. Touch any screen button to make a selection.
5. Seek Down and Up buttons for previous/next
tracks. Hold to enter manual seek mode.
6. Eject CD. Hold to eject all CD’s.
7. Load CD’s. Follow screen instructions.
8. Return to ‘Home’ screen.
Steering wheel controls
9. Audio volume.
10. Scroll through preset radio stations, CD
tracks or music folders.
Hold to select next/previous strong radio station
or next CD.
11. Audio mute.
12. Scroll through source options (as item \f).
jjm 18 96 30 101:XK NAS 10MY.qxd 04/09/2008 15:24 Page 12Aud io
Naviga tion
L
eft Right
12 :2 6 pm
Phone
8137562
72
70FF.0
.0
E xter nal60F
Octane
4 12:26pm 910
1211

Calls via the touchscreen
Making a call
1.With a paired and active phone, select
Phone orComms from the Home screen.
2. From the Digit Dial screen, enter the number
using the on\bscreen keypad.
\f. Touch on the screen. The call
duration appears on the screen.
4. To end the call touch .
Calls via the steering wheel
1. Press and hold the Sourcebutton to access
phone mode on the touch screen and
message center. Use the scroll control to
find the desired phonebook contact.
2. To make or receive a call, press on the
steering wheel.
\f. To end a call, press again.
\f5
Bluetooth® cell phones
Cell phone
Compatible Bluetooth cell phones can
communicate with the inbuilt telephone system.
Connection must be made with ignition on or
engine running.
Use the following procedures in conjunction with
your Bluetooth phone manufacturer’s
instructions.
Pairing your cell phone to the vehicle
With the ignition on, touch\bscreen active and no
phone currently docked:
1. Start the Bluetooth search function on your
cell phone.
2. Your phone will list any Bluetooth
devices found. Select Jaguarfrom the list.
\f. Now enter the Bluetooth PIN 1\f1\finto your
cell phone.
The phone should now pair and dock to the
vehicle system.
To undock a cell phone, select Phonevia the
touch\bscreen then Settingsfollowed by
Undock.
Downloading phonebook entries
When a cell phone with phonebook download
capability is paired and docked, its phonebook
directory will automatically download to the
vehicle system.
The vehicle phonebook will be updated each
time a cell phone is docked to the system.
To change the Auto download setting via the
touch\bscreen, touch Phone, select Phone
options thenPhonebook . Apply the change.
Jaguar Bluetooth Connectivity
For the latest list of compatible phones and their
software, refer to
http:\b\bwww.jaguar.com\bus\ben\bxk\bmodels_pricing\b
features\bfeatures_convenience.htm.
Operating note: ‘Docking’ and ‘docked’ are terms
used in relation to a paired phone that is fully
linked to the vehicle system and can be used for
calls. The cell phone is not physically docked in a
cradle.
Cell phone auto connect
The phone may request 'set authorisation ' or
'always allow'. If this is set the phone will
subsequently connect automatically.
jjm 18 96 30 101:XK NAS 10MY.qxd 04/09/2008 15:24 Page 15 Phone
12: 26 pm
Last N
amesP hone
D igi tDia l
Options Settings