6
Comfort adjustments
Climate control basic functions
Operation via the touch screen allows access to other features e.g. heated seats.
1. AUTO (automatic) mode
Press to select automatic operation of the
climate control system. The climate control will
automatically adjust heat, blower speed, air
intake and airflow distribution to maintain the
selected temperature(s) and reduce fogging
without constant manual adjustments.
2. Air recirculation
Press to select. A symbol will appear on the
touch\bscreen and an LED in the button will
illuminate.
Press again to deselect or press theAUTO
button.
\f. Temperature control
Press the red buttons to increase temperature
and the blue buttons to decrease temperature.
Temperatures in the separate passenger and
driver zones will automatically synchronise if HI
or LO is selected via the driver’s side control.
4. Heated front screen
The screen heaters will only operate when the
engine is running.
5. Heated rear screen and door mirrors
The rear screen heater button also controls the
door mirror heaters.
6. Front screen defrost\bdefog
Press to remove frost or heavy fogging from the
front screen. To deselect defrost mode, press
the DEF orAUTO buttons.
7. Blower speed
Adjust blower speed with the rotary control. Any
adjustment will cancel AUTOmode.
System off
Turn off by first selecting Climateon the touch\b
screen. Touch the Climate icon.
Touch again to turn on.
Recommended mode
Select AUTOas the normal operating mode. This
will help prevent window fogging and reduce
odours from the climate control system.
External water deposits
The climate control system removes moisture from
the air and deposits excess water beneath the
vehicle. Puddles may form, but this is normal and
no cause for concern.
Seat belts and air bags
A warning indicator on the instrument
pack will illuminate to warn you that the
driver's and/or front passenger's seat belt
is unbuckled. Dependent upon specification this
may be accompanied by a warning chime.
Child seats
It is important to remember that your child’s
weight, rather than age, determines the type of
seat that is required.
Refer to Child Safety in the Owner’s Handbook
to determine the correct seat for your child.The front passenger seat occupancy sensor
determines the state of seat occupancy and
sets the air bag status to suit:
• Seat unoccupied \b air bag
deactivated and
indicator off.
• Seat occupied \b air bag activated
and indicator off.
• Low weight occupant or
object \b air bag deactivated and indicator on.
jjm 18 96 30 101:XK NAS 10MY.qxd 04/09/2008 15:23 Page 6 71
2
33
645
Calls via the touch screen
Making a call
1.With a paired and active phone, select
Phone orComms from the Home screen.
2. From the Digit Dial screen, enter the number
using the on\bscreen keypad.
\f. Touch on the screen. The call
duration appears on the screen.
4. To end the call touch .
Calls via the steering wheel
1. Press and hold the Sourcebutton to access
phone mode on the touch screen and
message center. Use the scroll control to
find the desired phonebook contact.
2. To make or receive a call, press on the
steering wheel.
\f. To end a call, press again.
\f5
Bluetooth® cell phones
Cell phone
Compatible Bluetooth cell phones can
communicate with the inbuilt telephone system.
Connection must be made with ignition on or
engine running.
Use the following procedures in conjunction with
your Bluetooth phone manufacturer’s
instructions.
Pairing your cell phone to the vehicle
With the ignition on, touch\bscreen active and no
phone currently docked:
1. Start the Bluetooth search function on your
cell phone.
2. Your phone will list any Bluetooth
devices found. Select Jaguarfrom the list.
\f. Now enter the Bluetooth PIN 1\f1\finto your
cell phone.
The phone should now pair and dock to the
vehicle system.
To undock a cell phone, select Phonevia the
touch\bscreen then Settingsfollowed by
Undock.
Downloading phonebook entries
When a cell phone with phonebook download
capability is paired and docked, its phonebook
directory will automatically download to the
vehicle system.
The vehicle phonebook will be updated each
time a cell phone is docked to the system.
To change the Auto download setting via the
touch\bscreen, touch Phone, select Phone
options thenPhonebook . Apply the change.
Jaguar Bluetooth Connectivity
For the latest list of compatible phones and their
software, refer to
http:\b\bwww.jaguar.com\bus\ben\bxk\bmodels_pricing\b
features\bfeatures_convenience.htm.
Operating note: ‘Docking’ and ‘docked’ are terms
used in relation to a paired phone that is fully
linked to the vehicle system and can be used for
calls. The cell phone is not physically docked in a
cradle.
Cell phone auto connect
The phone may request 'set authorisation ' or
'always allow'. If this is set the phone will
subsequently connect automatically.
jjm 18 96 30 101:XK NAS 10MY.qxd 04/09/2008 15:24 Page 15 Phone
12: 26 pm
Last N
amesP hone
D igi tDia l
Options Settings
