2011 HONDA ODYSSEY width

µµ
Î
Î
Î
Î
Î
Î
Î
Specif ications688
Air Conditioning
Dimensions
Engine Weights Capacities
3.3 US qt (3.1
)
5.3 US qt (5.0)
4.2 US qt (4.0)
4.5 US qt (4.3)
2.64 US gal (10.0
)
1.93 US gal (7.3)
24.7 26.5 oz (700 750 g)
ND-OIL8
HFC-134a (R-134a)
21 US gal (79.5)
Refrigerant type
Charge quantity
Lubricant type
78.6 in (1,997 mm) 202.9 in (5,153 mm)
Length
Width
Height
Wheelbase
Track 118.1 in (3,000 mm)
68.1 in (1,730 mm)
68.2 in (1,732 mm)
8,477 lbs (3,845 kg)
Water cooled 4-stroke SOHC
i-VTEC · VCM2, 6-cylinder (V6), gasoline engine
3.50 x 3.66 in (89.0 x 93.0 mm) 212 cu-in (3,471 cm
)
Type
BorexStroke
Displacement
Compression ratio
Spark plugs
DILZKR7A11G
68.4 in (1,737 mm)
10.5 : 1
See the tire information label
attached to the driver’s doorjamb.
Gross vehicle weight rating
Gross combined weight
rating (GCWR) Fuel tank
Engine
coolant
Engine oil
Automatic
transmission
fluid
Windshield
washer
reservoir
4.8 US qt (4.5
)
2.6 US qt (2.5)
7.4 US qt (7.0)
8.0 US qt (7.6)
3.6 US qt (3.4)
Excluding the oil remaining in the engine 0.225 US gal (0.85
)
Including the coolant in the reserve tank and that remaining in the
engine
Reserve tank capacity:
Front
Rear
Approx.
NGK: 1:
2:
3 : Touring modelsChange
Total
Change
Including
filter
Without
filter
Total
Change
Total
U.S. Vehicles
Canada Vehicles
3
1
2
3
10/07/17 11:05:55 31TK8600_693
2011 Odyssey

The tires on your car meet all U.S.
Federal Saf ety Requirements. All
tires are also graded for treadwear,
traction, and temperature perform-
ance according to
Department of Transportation
(DOT) standards. The f ollowing
explains these gradings.
Quality grades can be f ound where
applicable on the tire sidewall
between tread shoulder and
maximum section width. For
example:
All passenger car tires must conf orm
to Federal Saf ety Requirements in
addition to these grades.The treadwear grade is a compara-
tive rating based on the wear rate of
the tire when tested under controlled
conditions on a specif ied government
test course. For example, a tire
graded 150 would wear one and one-
half (1 1/2) times as well on the
government course as a tire graded
100. The relative perf ormance of
tires depends upon the actual condi-
tions of their use, however, and may
depart signif icantly f rom the norm
due to variations in driving habits,
service practices and dif f erences in
road characteristics and climate.
The traction grades, f rom highest to
lowest, are AA, A, B, and C. Those
grades represent the tire’s ability to
stop on wet pavement as measured
under controlled conditions on
specif ied government test surf aces
of asphalt and concrete. A tire
marked C may have poor traction
perf ormance.
Warning: The traction grade
assignedtothistireisbasedon
straight-ahead braking traction tests,
and does not include acceleration,
cornering, hydroplaning, or peak
traction characteristics.DOT Tire Quality Grading (U.S. Vehicles)Unif orm T ire Quality Grading
T readwear 200
Traction AA
Temperature A T readwear
T raction690
10/07/17 11:06:26 31TK8600_695
2011 Odyssey

µ
µ
µ
µ
µ
µ
µ
The tires that came on your vehicle
have a number of markings. Those
you should be aware of are described
below.
Load index (a numerical code
associated with the maximum
load the tire can carry).
Speed symbol (an
alphabetical code indicating
the maximum speed rating).
Whenever tires are replaced, they
should be replaced with tires of the
same size. Following is an example
of tire size with an explanation of
what each component means.
Rim diameter in inches. Tire construction code (R
indicates radial). Aspect ratio (the tire’s section
height as a percentage of its
width). Tire width in millimeters. Vehicletype(Pindicates
passenger vehicle).
R 235 T
60 102
P
18
Tire Labeling
Tire Size
692TIRE LABELING EXAMPLE (1)
(1)
(4) (2)
(3)
(1)
(2)
(3)
(4) Tire Size
Tire Identification Number (TIN)
Maximum Tire Pressure
Maximum Tire Load
P235/60R18 102T
10/07/17 11:06:41 31TK8600_697
2011 Odyssey