CONT INUED
Your vehicle uses halogen light
bulbs. When replacing a bulb,
handle it by its plastic case, and
protect the glass f rom contact with
your skin or hard objects. If you
touch the glass, clean it with
denatured alcohol and a clean
cloth.Thefoglightswereproperlyaimed
when your vehicle was new. If you
regularly carry heavy items in the
cargo area or pull a trailer,
readjustment may be required.
Adjustment should be done by your
dealer or another qualif ied
technician.
Start the engine. If you are
replacing a driver’s side bulb, turn
the steering wheel all the way to
theright.If youarereplacinga
passenger’s side bulb, turn the
steering wheel to the lef t. Turn of f
the engine. Use a 10 mm wrench to remove
the mounting bolt, and remove the
screws with a Phillips-head
screwdriver. Pull the inner f ender
cover back.
1.
2.On Touring models
Lights
ReplacingaFogLightBulb
Maint enance
629
SCREWS
MOUNTING BOLT
Halogen light bulbs get very hot when
lit. Oil, perspiration, or a scratch on
the glass can cause the bulb to overheat
and shatter.
10/07/17 10:58:25 31TK8600_634
2011 Odyssey
ÎÎ
Î ÎÎÎ
Î
Î
Î
Î Î
µ
µ
µ Î
Î
Î
Î
Î
ÎSpecif ications
T echnical Inf ormation
689
Battery Lights
Seating Capacities Tires Alignment Fuses
60 W (HB3)
55 W
28/8 W
3.8 W (2 CP) 8W
1.4 W 8W 16 W
5W
21 W
3CP
21/5 W
21 W 55 W
Capacity 12 V
12 V 60 AH/5 HR
72 AH/20 HR 35 W
5W
1.4 W
The low beam headlights are high voltage discharged type.
Replacement of a low beam headlight bulb should be performed
by your dealer.
Replacement of a light bulb should be done by your dealer.
Headlights
Fog lights
Front turn signal/Parking/Side
marker lights
Side turn signal lights
Rear turn signal lights
Stop/Side marker/Taillights
Taillights
Back-up lights
License plate lights
High-mount brake light
Individual map lights
Vanity mirror lights
Cargo area light
Door courtesy lights
Glove box light
Foot light
3
3/2 2
8/7
Total
Front
Rear 60 psi (420 kPa , 4.2 kgf/cm
)
35 psi (240 kPa , 2.4 kgf/cm)
33 psi (230 kPa , 2.3 kgf/cm)
T135/80D17 103M P235/60R18 102T P235/65R17 103T
Size
Pressure 2°36’
0°30’0°
Toe-in
Camber
Caster Interior
Under-hood
Rear
0.07 in (2.0 mm) 0.00 in (0.0 mm)
See page
680or the fuse label
attached to the dashboard.
See page 681or the fuse label
attached to the inside of the fuse
box door under the dashboard.
See page 678and 679or the fuse
box cover.
See page 682or the fuse label
attached on the inside of fuse box
lid.
Front
Rear
Front
Rear
Front
Driver’s side
Passenger’s side
High
Low
:Second row
Third row
1:
2:
3:
4:
Touring models
Touring models LED(Amber) (H11) (H11)
(D2S)
Front/Rear
Spare
Front/Rear
Spare
(Amber)
Front
Rear
LX models
:
LED
U.S. Touring Elite and Canadian Touring models
4 4
4 21, 3
2
10/07/17 11:06:18 31TK8600_694
2011 Odyssey
