2011 HONDA ODYSSEY reset

If the power sliding door indicator
comesonandstayson,thereisa
problem in the system. Turn the
MAIN switch to OFF, and have the
system inspected by a dealer.
If there is a problem in the power
sliding door system, you will see a
‘‘CHECK LEFT SLIDING DOOR’’ or
‘‘CHECK RIGHT SLIDING DOOR’’
message on the multi-information
display (see page ). If this
message stays on, turn the MAIN
switch to OFF, and have the system
inspected by your dealer.
Each sliding door has a pinch sensor
on the f ront edge. Do not damage
this sensor, or the power sliding door
may not operate properly.
If your vehicle’s battery is
disconnected or goes dead while the
sliding door is open, the power
sliding door system needs to be reset.
Af ter reconnecting the battery, close
the sliding door completely by hand.
If the power sliding door is closed,
the system will reset itself
automatically once the battery has
been reconnected.
If the power sliding door does not
operate properly af ter resetting,
have your vehicle checked by your
dealer.
91
On all models except LXOn Touring models
On EX, EX-L models
Sliding Doors
Pinch Sensor
How to Reset the Power Sliding
Door Power Sliding
Door Indicator
174
Canada
U.S.
PINCH SENSOR
10/07/17 09:57:34 31TK8600_179
2011 Odyssey

The courtesy light between the map
lights come on when you turn the
parking lights on. To adjust its
brightness, turn the select/reset
knob on the instrument panel.
In addition to the courtesy light on
the ceiling, the driver’s and f ront
passenger’s ambient f oot light (if
equipped) comes on.Interior Lights216
COURTESY LIGHT
10/07/17 10:03:00 31TK8600_221
2011 Odyssey

Playing the FM/AM Radio (LX model)236
TUNE/ (SOUND) KNOB
SKIP BUTTONS PRESET BUTTONS DISPLAY
FM BUTTON
PRESET BUTTON AM BUTTON
TITLE BUTTON
A.SEL (AUTO SELECT) BUTTON FOLDER BAR/VOL (POWER/VOLUME) KNOB
SCAN BUTTON
10/07/17 10:05:59 31TK8600_241
2011 Odyssey

µ
µ
µ
The band and f requency that the
radio was last tuned to are displayed.
To change bands, press the AM or
FM button. On the FM band, ST will
be displayed if the station is
broadcasting in stereo. Stereo
reproduction in AM is not available.
On the AM band, AM noise
reduction turns on automatically. The ignition switch must be in the
ACCESSORY (I) or ON (II) position.
Turn the system on by pushing the
power/volume knob or the AM or
FM button. Adjust the volume by
turning the power/volume knob.
You can use any of f ive methods to
f ind radio stations on the selected
band: tune, skip, scan, the preset
buttons, and auto select.
On the FM band, you can also use
the f eatures provided by the radio
data system (RDS). For more
inf ormation on the RDS, see page
. The scan f unction samples
all stations with strong signals on the
selected band. To activate it, press
the SCAN button, then release it.
You will see SCAN in the display.
When the system finds a strong
signal, it will stop and play that
station f or about 10 seconds.
If you do nothing, the system will
scan f or the next strong station and
play it f or 10 seconds. When it plays
a station that you want to listen to,
press the SCAN button again.
Use the TUNE knob to
tune the radio to a desired f requency.
Turn the knob right to tune to a
higher f requency, or lef t to tune to a
lower f requency. Each time you press and release
either of the SKIP buttons ( or
), the radio f requency changes
in small increments.
The skip f unction searches
up and down f rom the current
f requency to f ind a station with a
strong signal. To activate it, press
either of the SKIP buttons ( or ), then release it.
239
CONT INUED
To Select a Station
To Play the Radio
SCAN
TUNE
SK IP
Playing the FM/AM Radio (LX model)
Features
237
10/07/17 10:06:10 31TK8600_242
2011 Odyssey

µµEach preset button can
store one f requency on AM and two
f requencies on FM. If you are
traveling and can no longer receive
your preset stations, you can use the
auto select feature to find stations in
the local area.
You will see a ‘‘0’’ displayed af ter
pressing a preset button if auto
select cannot f ind a strong station f or
that preset button.
If you do not like the stations auto
select has stored, you can store
other f requencies on the preset
buttons as previously described. ,pressthe
A. SEL (auto select) button. This
restores the presets you originally
set.
Press the A. SEL button. ‘‘A-SEL’’
f lashes in the display, and the system
goes into scan mode f or several
seconds. It stores the f requencies of
six AM and twelve FM stations in
the preset buttons. For inf ormation on FM/AM radio
f requencies and reception, see
.
Select the desired band, AM or
FM. FM1 and FM2 let you store
six stations each.
Usethetune,skip,scan,orRDS
function to tune the radio to a
desired station.
Pick a preset button, and hold it
until you hear a beep.
Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
1.
2.
3.
4.
To turn of f auto select
Preset
A UT O SEL ECTPlaying the FM/AM Radio (LX model)238
10/07/17 10:06:18 31TK8600_243
page409
2011 Odyssey

Playing the FM/AM Radio (EX, EX-L models without navigation system)Wit hout rear ent ert ainment syst emWit h rear ent ert ainment syst em252SCAN
BUTTON
SKIP BAR
RETURN
BUTTON AM/FM BUTTON
SELECTOR KNOB
U.S. EX models
PRESET BUTTONS
TITLE
BUTTON Canadian EX and EX-L models
U.S. EX-L models
CATEGORY
BAR
SETUP
BUTTON POWER/
VOLUME
KNOB
TITLE
BUTTON
SKIP BAR
SCAN
BUTTON
RETURN
BUTTON
SELECTOR KNOB
SETUP
BUTTON
PRESET BUTTONS
AM/FM BUTTON
CATEGORY
BAR
(FOLDER
BAR) POWER/
VOLUME
KNOB
10/07/17 10:08:07 31TK8600_257
2011 Odyssey

µ
µ
You can use any of f ive methods to
f ind radio stations on the selected
band: tune, seek, scan, the preset
buttons, and auto select.
On the AM band, AM noise
reduction turns on automatically. The band and f requency that the
radio was last tuned to are displayed.
To change bands, press the AM or
FM button, or AM/FM button. On
the FM band, ST will be displayed if
the station is broadcasting in stereo.
Stereo reproduction in AM is not
available. On the FM band, you can also use
the f eatures provided by the radio
data system (RDS). For more
inf ormation on the RDS, see
. The skip f unction searches
up and down f rom the current
f requency to f ind a station with a
strong signal. To activate it, press
and hold the or side of the
SKIP bar until you hear a beep, then
release it.
Use the selector knob to
tune the radio to a desired f requency.
Turn the knob right to tune to a
higher f requency, or lef t to tune to a
lower f requency.
The ignition switch must be in the
ACCESSORY (I) or ON (II) position.
Turn the system on by pushing the
power/volume knob. Adjust the
volume by turning the same knob.
CONT INUED
To Select a Station
To Play the Radio SK IP
TUNE
Playing the FM/AM Radio (EX, EX-L models without navigation system)
Features
253
10/07/17 10:08:15 31TK8600_258
page 255
2011 Odyssey

µ
µ µ
Each preset button can
store one f requency on AM and two
f requencies on FM.
Select the desired band, AM or
FM. You can store one f requency
on FM1, and one f requency on
FM2witheachpresetbutton.
Usethetune,skip,scan,orRDS
function to tune the radio to a
desired station.
Pick a preset button, and hold it
until you hear a beep.
Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
The scan f unction samples
all stations with strong signals on the
selected band. To activate it, press
the SCAN button, then release it.
You will see SCAN in the display.
When the system finds a strong
signal, it will stop and play that
station f or about 10 seconds.
If you do nothing, the system will
scan f or the next strong station and
play it f or 10 seconds. When it plays
a station that you want to listen to,
press the SCAN button again. If you are
traveling and can no longer receive
your preset stations, you can use the
auto select feature to find stations in
the local area.
Push the SETUP button to display
the setup MENU. Turn the selector
knob to select Auto Select, then
press the selector knob. The display
changes to the auto select mode.
Select ‘‘PUSH TO START’’ or ‘‘ON,’’
then press the selector knob. You
will see Auto Select on the display,
and the system goes into the auto
select mode f or several seconds.
If you do not like the stations auto
select has stored, you can store
other f requencies on the preset
buttons as previously described.
1.
2.
3.
4. Preset
SCAN AUTO SELECT
Playing the FM/AM Radio (EX, EX-L models without navigation system)254
10/07/17 10:08:23 31TK8600_259
2011 Odyssey