2011 HONDA FIT change time

Navigation System7
Introduction
Verified streets (dark colored) Unverified streets (light colored)
When displayed
These roads are found within metropolitan areas, and include interstate freeways and major roads connecting cities.
These roads are found in rural areas, and typically include residential street s away from the center of a town.
Street color Shown on daytime map screen as black or red, such as interstate freeways. Shown on the daytime map screen as light brown.
Map quality
The database vendor has verified these streets. Information like tu rn restrictions, average speed, and whether it is a one-way street have been gathered and used when creating your route to a destination.
These streets have not been veri fied by the database vendor. The system does not contain inform ation on one-way streets, turn restrictions, or the road’s average speed. They are shown on the map for reference and may have e rrors in map location, naming, and address range.
Routing differences
While driving to your destin ation, the displayed route line is solid blue. The sy stem provides voice and map guidance to your destination.
Your route line is either a blue dotted “vector line,” or a dashed pink/blue line. For information on selecting this option, and the routing differences, see Unverified Area Routing on page 83.
Cautions
There are no pop-up boxes urging extra caution during a route. However, because roads constantly change, you are urged to use common sense, and always obey posted traffic restrictions.
Regardless of whether the user c hooses route guidance, there are cautionary screens before and dur ing the route urging the user to be extra cautious, and obey a ll traffic restrictions. See Unverified Area Routing on page 83.
Guidance voice Voice guidance issues instruct ions such as “In a half- mile, make a right turn.” The phrase “if possible” is added to each guidance instruction. For example: “In a half-mile, ma ke a right turn, if possible.”
Time and distance “to go”
The time and distance “t o go,” displayed while en route to a destination, is based on the average speed and distance for the roads used for your route.
Because the average speed of thes e roads is not known, the time and distance “to go” is based on a fixed average speed of 25 mph for these roads.

Navigation System13
Getting Started
Using the Voice Control System
You should use the voice control system as much as possible, and consider manual entry using the joystick as a backup method of entry.
Most of the system’s functions can be controlled by voice commands activated with the NAVI TALK button. To control the navigation system by voice:
• Press and release the NAVI TALK button.
• Wait for the beep.
• Give a voice command.
Once the microphone picks up your command, the system changes the display in response to the command and prompts you for the next command. Using the NAVI TALK button, answer the prompts as required.
If the system does not understand a command or you wait too long to give a command, it responds with “Pardon,” “Please repeat,” or “Would you say again.” If the system cannot perform a command or the command is not appropriate for the screen you are on, it sounds a beep.
Anytime you are unsure of what voice commands are available on a screen, you can always say “Help.” The system will then read the list of available commands to you.
When you give a command, the system generally either repeats the command as a confirmation or asks you for further information. If you do not wish to hear this feedback, you can turn it off. However, hearing the feedback will familiarize you with the way the system expects commands to be phrased. See the Voice Recognition Feedback setting in Setup.
If you hear a prompt such as “Please use the touch screen to...” or “Please choose an area with the joystick,” the system is asking for input that cannot be performed using the voice control system.
Improving Voice Recognition
To achieve optimum voice recognition, the following guide lines should be followed:
NOTE:
Make sure the correct screen is displayed for the vo ice command that you are using. See Voice Command Index on page 138.
• Adjust the dashboard and side vents so air does not blow against the microphone on the ceiling.
• Close the windows.

Navigation System17
Getting Started
Read this disclaimer carefully so you understand it before continuing. Push in on the joystick, or touch OK, and the map screen will appear on the display. The “OK” cannot be activated by voice.
NOTE:
If you do not select OK, and then enter the Setup or Information screens, some items are not available and will show up as darkened buttons (grayed out). See System Function Diagram on page 20.
If you do not press the joystick or touch OK , the screen will turn to the clock screen after 30 seconds.
If you are not planning to use the navigation system at this time, touch DISPLAY OFF to turn off the screen.
By touching CLOCK TYPE, you can change the design of the clock screen. For details of the clock type, see page 75.
Tip:
For information on clock adjustment, see page 93.
To return to the Disclaimer screen, press the MENU or MAP/GUIDE button.
If you have entered any Calendar reminders, they are displayed after you select OK.
The Calendar reminder screen remains displayed until you select OK or Remind Later, or press the CANCEL button.
If you select OK, the reminder will not show up again. If you wish to have the reminder show up agai n later in the day, touch the Remind Later button.
If you press the CANCEL button, the message will be displayed the next time you start the vehicle.
NOTE:
The system will display the current message and any older or previously unread messages, with the newest message listed first.

Navigation System19
Getting Started
Map Screen Description
Zoom In/Out
Use the ZOOM buttons to change the scale of the map. Zooming in increases the detail, while zooming out gives you a wide area view. After changing the scale, give the system a few moments to update the display.
Map Scrolling
To view other areas on the map, move the joystick left, right, up, or down. The map will shift in that direction. To return the map to you r current location, press either the MAP/GUIDE, CANCEL , or NAVI BACK button on the steering wheel.
Displaying Current Location
You can say “Display current location” or touch the vehicle position icon at any time to see the current address, latitude, longitude, and elevation. The screen will change to:
NOTE:
The elevation will not appear when the system is temporarily lacking proper GPS information. The system elevation may not agree with elevations shown on roadside elevation signs, and may fluctuate plus or minus 100 feet or more.
You can say “Save current location” or select Save on the screen to save the current location in your Address Book.
Select Return to return to the previous screen.

20Navigation System
Getting Started
System Function Diagram
This diagram shows the navigation system features, starting at the center and working outward in layers. The navigation program starts at “Key ON,” and then displays the globe screen (blue). If OK is selected on the Disclaimer screen, the functions in the yellow segments of the diagram become available in the Setup and Information screens.The white segments of the diagram are available anytime, even if you do not select OK.
The items above the map screen show various methods to begin driving to your destination (orange). You are provided with map/voice guidance, routing cautions, and a direction list. While driving to your destination, use the voice control system as much as possible to interact with the navigation and audio syst ems (green).
KEY ONGLOBESCREENPRESS OK
OKNOT PRESSED
THEDISCLAIMERSCREEN(pg.16)
CALENDAR
REMINDERS(pg.17)-THEMAPSCREEN(pg.18)-
AUDIO BUTTO N (pg. 11)
INFO BUTTON (pg. 6
9 )
Formoreinformation,see
yourOwner’sManual
VOICECOMMANDS
NAVI AUDI
O (pg. 6 9 )
ENTER (pg. 71)
LIST (pg. 70)
MATH (pg. 72)
CONVERT (pg. 72)
LIST (pg. 70)
CALENDAR
CALCULATOR
MAP LEGEND
VOICE: "FIND NEARE ST..." ATM, ETC. (pg. 140)SELECT A DESTINATION WITHJOYSTICK (pg. 66)
VOICE: "GO HOME" (pg. 44)
VOICE: "MENU" FOR ENTERDESTINATIONSCREEN(pg. 21)CONTIN
UE TO THE DESTINATION (RESUME) AFTER RESTART
(pg. 68)
VOICE HELPSELECT BAND/ FREQUENCYVOL BALANCECD
FUNCTIONSOTHER AUDIO
VOICE: "ZOOM IN/ZOO M OUT"
(pg. 54, 13 9 )
VOICE: "HIDE/DISP LAY ICONS" (pg. 57, 13 9 )
INFORMATION
SCREEN (pg. 143)
AUDIO (pg. 141, 142)
-DRIVINGTOYOURDESTINATION-
(MAP/VOICEGUIDANCE,ROUTINGCAUTIONS,DIRECTIONLIST)
VOICE: "HELP"(ALL)(pg. 138)
VOICE: "INFORM
ATION
SCREEN" (pg. 6 9 )
VOICE: "MENU" (to change route)(pg. 63)
VOICE: "HOW FAR TO THEDESTINATION?"(pg. 138)
VOICE: "DISPLAY (OR SAVE) CURRENT LOCATION"(pg.61)VOICE:"SET WAYPOINT" (pg. 64)
VOICE: "WHAT TIME IS IT?" (pg. 138)
VOICE: AUDIO (pg. 141
, 142)
ADD BOOK (pg. 76)PINs (pg. 80)UNITS MI/KM (pg. 9 2)
PERSONALBASIC
UNVERIFIED (pg. 83)AVOID AREAS (pg. 87)ADJ. TIME (pg.
9 3)CLOCK TYPE
(pg. 94)
ROUTING GUIDANCECLOC K SETT INGS
OFF-ROAD TRA
CKING (pg. 60, 9 0)
CORRECT VEHICL
E
POSITION (p
g. 91)
MAP COLOR
(pg. 95)
MENU COLOR (pg.
95)
VEHICLECOLOR
GUIDE. PRO
MPTS (pg. 75)
SETUPSCREE
N
(FIRST)
OKNOTPRESSED
VERSION (
pg. 92)
SYSTEM INF
O.
BRIGHTNESS
(pg. 73)
VOLUME (pg. 73)DISPL
AY (pg
. 74)
CONTRAST
(pg. 75)
SETUP(pg.73)
BRIGHTNESS ZOOM IN/OUT
REAR CAMERA (REVERSE)

Navigation System23
To enter the city name by voice spelling, say or select CHANGE TO Spell Mode on the Say city name screen, and the display will change to the Enter city name screen. Say the city name by saying individual letters, or words that represent the letters, one at a time.
The system has a talk back function. If your spoken letter is not recognized, the system will talk back to you. For example, if you say “E” but the system does not recognize the command, it will ask you, “Please select the number of the input letter from the list,” and the following pop-up box will appear:
You should select a letter by saying the number.
Alternatively, to improve voice recognition, you can say “Echo” or “Edward” instead of “E.”See page 15 for a list of available words for each letter.
By Touch Control:
Select City, and the display then changes to the Enter city name screen. Use the on-screen keyboard to enter the name of the city.
The system will display a list of city names, with the closest match to the name you entered at the top of the list. Select the number (1-6) of the desired city from the list.
Entering a Destination

24Navigation System
If the system does not find an exact match, select List when you finish entering the name of the city. Most of the cities and towns for that state are listed.
Listings of cities and towns in the non- detailed coverage area may have an asterisk “*” next to their names. If you select one, a pop-up box is displayed saying, “No detailed street data...”, and a street address cannot be entered (see Map Coverage on page 107). Try entering the street fi rst, and then select the city if available.
Select View Dest. Map and use the joystick to select an icon, approximate area, or street you wish to choose as your destination. Otherwise, a central location of the city will be selected. If you select a point of interest (POI) or road in an unverified area, you may or may not have routing in these areas. See Map Overview on page 6.
Selecting the Street
By Voice Control:
After you have selected the city, or if you say “Street” on the Find address by screen, the display changes to the Say street name screen. Say the street name and the searching will begin.
To enter the street name by voice spelling, say or select CHANGE TO Spell Mode on the Say street name screen, and the display will change to the Enter street name screen.
Say the street name by saying individual letters or numbers, or words that represent the letters, one at a time.
Entering a Destination

Navigation System27
NOTE:
If you find that your city is not listed, it may be part of a larger metropolitan area. Try entering the street first. Prior to departure, you can set areas to avoid. The system then includes them in its calculations for the destination you have entered. See Edit Avoid Area on page 87.
Selecting the State or Province
The state you are in is displayed at the top of the screen. If your desired destination is in an other state, select Change State .
The display then changes to the Enter state name screen. Use the voice control system and say the name of the state or use the on-screen keyboard to enter the name of the state.
Selecting the City
This is helpful if the street runs through several cities, and you know what city includes the street. Th e city you are in is displayed on the screen. If the city you want is displayed on the screen, say “Select current city .” If your desired destination is in another city, say or enter another city.
By Voice Control:
Say “City” on the Find intersection by screen, and the display changes to the Say city name screen. Say the city name and the searching will begin.
To enter the city na me by voice spelling, say or select CHANGE TO Spell Mode on the Say city name screen, and the display will change to the Enter city name screen. Say the city name by saying individual letters, or words that represent the letters, one at a time.
Entering a Destination