2011 HONDA CR-Z navigation system

98
Controls
Setting the Clock
Clock
Models without navigation system
You can adjust the time in the clock display, using the CLOCK (AM/FM) button.Adjusting the Time

■
Press and hold the CLOCK button until the clock display begins to blink.
1.
Press the
2.
1 (Hour) button to change the hours.
Press the
3.
2 (Minute) button to change the minutes.
Press the CLOCK button to go back to the normal display.
4.
Button
Button
Button
(Power) Button
Clock Display
CLOCK Button
3
Clock
To set the time to the nearest hour: Press and hold the CLOCK button until the clock display begins to blink, then press the
3 (Reset)
button. Depending on the displayed time, the clock sets forward or backward.Example:1:06 will reset to 1:001:53 will reset to 2:00
Models with navigation system The clock is automatically updated through the navigation system, so the time does not need to be adjusted.
Main MenuTable of Contents

Features
This chapter describes how to operate the audio system and other technology features.
135
Audio System
About Your Audio System ...................... 136 Compatible iPod and USB Flash Memory
Devices .................................................. 137
USB Adapter Cable ................................. 138
Auxiliary Input Jack ................................. 139
Audio System Theft Protection ............... 140
Audio without Navigation System
Audio System Basic Operation ................ 141
Playing the AM/FM Radio ....................... 143
Playing a CD ........................................... 145Playing an iPod ®
..................................... 147
Playing a USB Flash Memory Device ........ 149 General Information on the Audio System
Recommended Discs .............................. 170Recommended USB Flash Memory
Devices .................................................. 172
Bluetooth ®
HandsFreeLink ®
.................... 173
Using HFL ............................................... 173
HFL Menus ............................................. 175
Phone Setup ........................................... 177
Making a Call ......................................... 179
HFL Phonebook ...................................... 183
Cellular Phonebook ................................ 185
System Setup ......................................... 188
Audio with Navigation System
Audio System Basic Operation ................ 151
Playing the AM/FM Radio ....................... 154
Playing a Disc ......................................... 156
Playing a PC Card ................................... 158Playing an iPod ®
..................................... 162
Playing a USB Flash Memory Device ........ 165
Audio Error Messages Disc Player .............................................. 167iPod ®
/USB Flash Memory Device ............. 168
Audio Remote Controls .......................... 169
Main Menu

136
Features
Audio System
About Your Audio System The audio system features AM/FM radio. It can also play audio discs, WMA/MP3/ AAC files, iPods, and USB flash memory devices. The audio system is operable from the buttons and switches on the panel, icons on the navigation screen, or the remote controls on the steering wheel. The radio theft protection feature is activated if the audio system is disconnected from electric power. You need to enter an audio security code that comes with your vehicle to reactivate the disabled system.
About Your Audio System
Video CDs, DVDs, and 3-inch (8-cm) mini discs are not supported. iPod is a registered trademark owned by Apple Inc.
Models with navigation system You can operate the audio system by voice commands. See the navigation system manual for full details.
Audio Remote Controls
Auxiliary Input Jack
Models with navigation system
Models without navigation system
USB Adapter Cable
iPod USB Flash Memory Device
Main MenuTable of Contents

139
Features
Audio System Auxiliary Input Jack
Auxiliary Input Jack Use the jack on the front panel to connect standard audio devices.1. Open the AUX cover. Connect a standard audio device to the
2.
input jack using a 1/8 inch (3.5 mm) stereo miniplug.
The audio system automatically switches to the AUX mode.
Auxiliary Input Jack
To switch the mode, press either FM/AM, or the CD button. You can return to the AUX mode by pressing the AUX button.
Models with navigation system Press either the AM/FM button or the CD/AUX button, or touch the icon to switch the mode. You cannot use the auxiliary input jack if you replace the audio system.
Models without navigation
Coversystem
Models with navigation system
Cover
Main MenuTable of Contents

140
Features
Audio System Audio System Theft Protection
Audio System Theft Protection
The audio system is disabled when it is disconnected from the power source, such as when the 12 volt battery is disconnected or goes dead.Entering the Audio Security Code
■
“ENTER CODE” appears on the display when the power is reconnected.
Turn on the audio system.
1.
Enter the security code using the preset buttons.
2.
Models with navigation system
Touch the icon to enter the code, then touch the Done icon to set it. If you enter an incorrect digit, continue to the last digit, then try again. If you do not enter the code correctly after 10 tries, you need to visit a dealer to have the system reset.
Audio System Theft Protection
Find the audio system's security code and serial number on the radio code card.
Do not store the card in your vehicle. If you lose the
radio code card, you must obtain the information from a dealer.
Main MenuTable of Contents

141
Features
Audio without Navigation System
Audio System Basic Operation To use the audio system function, the ignition switch must be in ACCESSORY
I or
ON
II.
Use the VOL/SELECT knob to access some audio functions. VOL/SELECT knob: Turns left and right to select the items. Press
to set your selection.
button: Press to go back to the previous
display.
Audio System Basic Operation
These indications are used to show how to move the VOL/SELECT knob .
Rotate
to select.
Press
to ENTER.
VOL/SELECT (Volume/Select) Knob Button
Main MenuTable of Contents

142
Features
Audio without Navigation System Audio System Basic Operation
Adjusting the Sound
■
Press the button, and rotate to adjust
the setting. Each time you press the
button, a sound
mode switches as follows.
Adjusting the Sound
When the adjustment level reaches the center, you will see "C" in the display. The SVC has four modes: OFF, LOW, MID, and HIGH.SVC adjusts the volume level based on the vehicle speed. The faster you go, the audio volume increases. As you slow down, the audio volume decreases.
(Sound)
Button
VOL/SELECT Knob
BASS
TREBLE
FADER
BALANCE
SUBW
SVC Subwoofer
*
Speed-sensitive VolumeCompensation
* Not available on all models
Main MenuTable of Contents

143
Features
Audio without Navigation System Playing the AM/FM Radio
Playing the AM/FM Radio
(Power) Button
Press to turn the audio
system ON and OFF.
VOL/SELECT Knob
Turn to adjust the volume.
Turn to tune the radio frequency. Preset Buttons (1-6)To
store the station:
1. Tune to the selected station.
2. Pick a preset button and hold it until you hear a beep.
To listen to a stored station, select a
band, then press the preset button.
FM/AM ButtonPress to select a band.
TITLE ButtonPress to switch the RDS name
on and off.
/ Button Press to display and select an
RDS category.
SCAN ButtonPress to sample the strongest stations on the selected band for 10 seconds each. To turn off scan, press the button again.
SEEK Buttons •
Press to change a station.
• Press and hold to search up and down the selected band for a station with a strong signal. A.SEL (Auto Select) ButtonPress to scan both bands and store the strongest station in each preset.To
turn off auto select, press the
button again. This restores the presets you originally set.
Main MenuTable of Contents