2011 FORD KUGA AIR CON

[x] Cancel search: AIR CON

Page 125 of 2057

FORD KUGA 2011 1.G Workshop Manual 8.
Torque: 18 Nm
Installation
1.
To install, reverse the removal procedure.
2. Coat the O-ring seals on the refrigerant lines.
Material: Compressor Oil - Air Conditioning
(WSH-M1C231-B / 6U7J-M1C231-A

Page 128 of 2057

FORD KUGA 2011 1.G Workshop Manual Low-Pressure Cutoff Switch
Materials
Specification
Name
WSH-M1C231-B /
6U7J-M1C231-AA
Compressor Oil - Air
Conditioning
Removal
NOTE: Removal steps in this procedure may
contain installation details.

Page 129 of 2057

FORD KUGA 2011 1.G Workshop Manual High-Pressure Cutoff Switch
Materials
Specification
Name
WSH-M1C231-B /
6U7J-M1C231-AA
Compressor Oil - Air
Conditioning
Removal
NOTE: Removal steps in this procedure may
contain installation details.

Page 131 of 2057

FORD KUGA 2011 1.G Workshop Manual Installation
1.
To install, reverse the removal procedure. G1072298en
2008.50 Kuga 8/2011 412-01-61
Climate Control
412-01-61
REMOVAL AND INSTALLATIONTO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 201

Page 135 of 2057

FORD KUGA 2011 1.G Workshop Manual Evaporator Core Orifice
Special Tool(s)
412-027
Disconnect Tool, Spring Lock
Coupling (1/2" blue) 412-034
Remover/Installer, Evaporator
Core Orifice Special Tool(s)
412-034-01
Adapter for 412-034 412-

Page 137 of 2057

FORD KUGA 2011 1.G Workshop Manual Using the special tools, remove the broken fixed
orifice tube.
Special Tool(s): 412-034, 412-035
Installation
1.
To install, reverse the removal procedure.
2. Coat the O-ring seals on the refrigerant

Page 139 of 2057

FORD KUGA 2011 1.G Workshop Manual 4. CAUTION: Make sure that all openings
are sealed. Use new blanking caps. Special Tool(s): 412-027
Torque: 25
Nm 5.
6. CAUTION: Make sure that all openings
are sealed. Use new blanking caps. Torque:

Page 145 of 2057

FORD KUGA 2011 1.G Workshop Manual In-Vehicle Temperature Sensor
Removal
1.
2.
3. 4.
Installation
1.
To install, reverse the removal procedure. G1158232en
2008.50 Kuga 8/2011 412-01-75
Climate Control
412-01-75
REMOVAL AND INSTALLATION