2011 Citroen C ZERO lock
[x] Cancel search: lockPage 70 of 164
!
Child safety
68
The incorrect installation of a child seat in a
vehicle compromises the child's protection
in the event of an accident.
When installing a child seat using the seat
belt, check that the seat belt is tightened
correctly on the child seat and that it
secures the child seat firmly on the seat of
your vehicle.
Remember to fasten the seat belts or the
child seat harnesses keeping the slack
in
relation to the child's body to a minimum,
even for shor t journeys.
For optimum installation of the "for wards-
facing" child seat, ensure that the back of
the child seat is in contact with the back
of the vehicle's seat and that the head
restraint does not cause any discomfor t.
If the head restraint has to be removed,
ensure that it is stored or attached securely
to prevent it from being thrown around the
vehicle in the event of sharp braking.
Children under the age of 10 must not travel
in the "for wards-facing" position on the front
passenger seat, unless the rear seats are
already occupied by other children, cannot
be used or are absent.
Deactivate the passenger airbag * when a
"rear wards-facing" child seat is installed on
the front seat. Other wise, the child would
risk being seriously injured or killed if the
airbag were to inflate.
Advice on child seats
Installing a booster seat
The chest par t of the seat belt must be
positioned on the child's shoulder without
touching the neck.
Ensure that the lap part of the seat belt
passes correctly over the child's thighs.
CITROËN recommends the use of a
booster seat which has a back, fitted with a
seat belt guide at shoulder level.
As a safety precaution, do not leave:
- one or more children alone and
unsuper vised in a vehicle,
- a child or an animal in a vehicle which
is exposed to the sun, with the windows
closed,
- the keys within reach of children inside
the vehicle.
To prevent accidental opening of the doors,
use the "Child lock".
Take care not to open the rear windows by
more than one third.
To protect young children from the rays of
the sun, fit side blinds on the rear windows.
*
According to country and current local
legislation.
Child lock
Mechanical system to prevent opening of the
rear doors using their interior controls.
The control is located on the edge of each rear
door.
Child lock on
)
Lower the control A
to position 1
.
Child lock off
)
Raise the control A
to position 2
.
Page 72 of 164
!
Safety
70
Braking assistance systems
Anti-lock braking system
and electronic brake force
distribution
Linked systems which improve the stability and
manoeuvrability of your vehicle when braking,
in par ticular on poor or slippery sur faces. Group of supplementary systems which help
you to obtain optimum braking in complete
safety in emergency situations:
- anti-lock braking system (ABS),
- electronic brake force distribution (EBFD),
- emergency braking assistance (EBA).
Emergency or
assistance call
This system allows you to make an emergency
or assistance call to the emergency ser vices or
to the dedicated CITROËN ser vice.
For more information on the use of this
function, refer to the "Audio and telematics"
section.
When braking in an emergency, press
very firmly without releasing the
pressure.
Activation
The anti-lock braking system comes into
operation automatically when there is a risk of
wheel lock.
Normal operation of the ABS may make itself
felt by slight vibration of the brake pedal.
Page 73 of 164
7
i
!
Safety
71
Operating fault
When the vehicle is stationary
The warning lamp comes on for a few
seconds when the ignition is switched
on (ON position). If it does not go off or
does not come on, contact a CITROËN
dealer or a qualified workshop. Fixed illumination of this warning
lamp indicates a malfunction of the
wheel anti-lock braking system which
could result in a loss of control of the
vehicle on braking.
You must stop as soon as it is safe to do so.
Contact a CITROËN dealer or a qualified
workshop.
When the vehicle is moving
Illumination of these two
warning lamps indicates a
malfunction of the electronic
brake force distribution
which could result in a loss of control of the
vehicle on braking.
You must stop as soon as it is safe to do so.
Contact a CITROËN dealer or a qualified
workshop.
When replacing wheels (tyres and rims),
ensure that they conform to the manufacturer's
recommendations.
Illumination of this warning lamp
indicates a malfunction of the wheel
anti-lock braking system, which
could result in a loss of control of the
vehicle when braking.
Contact a CITROËN dealer or a qualified
workshop.
Emergency braking assistance
System which, in an emergency, enables you
to obtain the optimum braking pressure more
quickly, thus reducing the stopping distance.
Activation
It is triggered by the speed at which the brake
pedal is pressed.
The effect of this is a reduction in the
resistance of the pedal and an increase in
braking efficiency.
When braking in an emergency, press
firmly without releasing the pressure.
Page 77 of 164
7
i
Safety
75
The driver must ensure that passengers use
the seat belts correctly and that they are all
restrained securely before setting off.
Wherever you are seated in the vehicle,
always fasten your seat belt, even for short
journeys.
Do not interchange the seat belt buckles as
they will not fulfil their role fully.
The seat belts are fitted with an iner tia reel
permitting automatic adjustment of the length
of the strap to your size. The seat belt is
stowed automatically when not in use.
Before and after use, ensure that the seat
belt is reeled in correctly.
The lower part of the strap must be
positioned as low as possible on the pelvis.
The upper par t must be positioned in the
hollow of the shoulder.
The iner tia reels are fitted with an automatic
locking device which comes into operation in
the event of a collision, emergency braking
or if the vehicle rolls over. You can release
the device by pulling firmly on the strap and
releasing it so that it reels in slightly.
Recommendations for children
Use a suitable child seat if the passenger is
less than 12 years old or shor ter than one
and a half metres.
Never use the same seat belt to secure more
than one person.
Never allow a child to travel on your lap. In order to be effective, a seat belt must:
- be tightened as close to the body as
possible,
- be pulled in front of you with a smooth
movement, checking that it does not
twist,
- be used to restrain only one person,
- not bear any trace of cuts or fraying,
- not be conver ted or modified to avoid
affecting its per formance.
In accordance with current safety
regulations, for all repairs on your vehicle,
go to a qualified workshop with the skills
and equipment needed, which a CITROËN
dealer is able to provide.
Have your seat belts checked regularly by
a CITROËN dealer or a qualified workshop,
par ticularly if the straps show signs of
damage.
Clean the seat belt straps with soapy
water or a textile cleaning product, sold by
CITROËN dealers.
After folding or moving a seat or rear bench
seat, ensure that the seat belt is positioned
and reeled in correctly.
In the event of an impact
Depending on the nature and
seriousness of the impact
, the
pretensioning device may be deployed
before and independently of the airbags.
Deployment of the pretensioners is
accompanied by a slight discharge of
harmless smoke and a noise, due to the
activation of the pyrotechnic car tridge
incorporated in the system.
In all cases, the airbag warning lamp
comes on.
Following an impact, have the seat belts
system checked, and if necessary replaced,
by a CITROËN dealer or a qualified
workshop.
Page 82 of 164
!
!
i
Practical information
80
Charging the main battery
)
Pull lever 1
, located at the bottom of
the dashboard, driver's side, to open
the access flap for the normal charging
socket (right hand side of the vehicle).
Normal charging
Before connecting, check that the
power point you want to use is standard
and is compatible with the current rating
on the charging cable control unit.
In all cases, it is recommended that
your installation be checked by
a qualified electrician.
There are two types of charging: normal and
fast.
Normal charging should be used in preference;
it is done from a domestic power point.
Fast charging is done at a compatible fast
charge station.
)
Apply the parking brake and put the drive
selector in position P
.
)
Switch off all electrical consumers and turn
the ignition switch to the "LOCK"
position.
Always use a genuine CITROËN
charging cable.
If the ambient temperature is
below -25 °C, charging may not be
possible.
Page 86 of 164
!
!
Practical information
84
Check the compatibility of the charging
station and its charging cable with your
vehicle.
)
Press latch 4
to open the socket cover.
)
Ensure that there is no foreign body on the
vehicle's charging socket.
Fast charging
)
Apply the parking brake and put the drive
selector in position P
.
)
Switch off all electrical consumers and turn
the ignition switch to the "LOCK"
position.
)
Pull lever 3
, located alongside the driver's
seat, outer side, to open the access flap for
the fast charging socket (left hand side of
the vehicle). Do not touch the metal end of the
normal charging socket or of the
charging cable.
Risk of electrocution and/or faults.
)
Connect the charging cable of the charging
station to the vehicle following the
instructions on use of the station.
Page 90 of 164
!
Practical information
88
Charging the battery using
a battery charger
)
Star t the other vehicle and wait a few
minutes.
)
Turn the ignition key on your vehicle, until
the "Ready" lamp comes on.
)
Disconnect the cables in the reverse order.
)
Refit the battery protective cover and
tighten the fixing screw.
If the "Ready" lamp does not come on, proceed
as follows:
)
Leave the cables connected.
)
Return the ignition switch on your vehicle
to the " LOCK
" position.
)
Put the main battery on charge, following
the procedure for normal charging
(see "charging the main battery").
)
When the charging warning lamp in
the instrument panel comes on fixed,
disconnect the cables.
)
Leave the battery on charge for at least
one hour.
)
Turn the ignition key on your vehicle, until
the "Ready" lamp comes on.
If the problem persists, contact a CITROËN
dealer or a qualified workshop.
)
Remove the protective cover from the
battery.
Ensure that the electrolyte is not frozen.
Check the electrolyte level and top up
with distilled water if necessary (refer to
"checking levels" in this document).
)
Slacken nut 1
and lift off the retaining bar.
Page 93 of 164
8
i
!
Practical information
91
1.
12 V compressor with integral pressure
gauge, to measure and adjust the tyre
pressure.
Composition of the kit
2.
Sealant car tridge for the temporary repair
of a tyre.
3.
Injection pipe.
4.
Suction pipe, to remove the sealant product
if necessary.
5.
Sachet containing a replacement valve
core, a tool for removing/refitting the valve
core and a speed restriction sticker.
The speed restriction sticker must be
affixed to the vehicle's steering wheel to
remind you that a wheel is in temporary
use.
Do not exceed a speed of 50 mph
(80 km/h) when driving with a tyre
repaired using this type of kit.
Refi tting the rear seat cushion
)
Put the metal cover back into place.
)
Refit the four "butter fly" screws.
)
Inser t the metal hooks into the seat
backrest.
)
Fold the seat cushion down until it locks
in place.
When refitting the cushion, take care
not to trap the seat belt buckles.