Page 34 of 164
Access
32
Folding the key
Anti-theft protection
)
First press button A
to fold the key.
Electronic engine immobiliser
The key contains an electronic chip which has a
special code. When the ignition is switched on,
this code must be recognised to permit star ting.
This electronic engine immobiliser locks the
engine management system a few moments
after the ignition is switched off and prevents
star ting of the engine by anyone who does not
have the key.
In the event of a malfunction and if your vehicle
does not start, contact a CITROËN dealer as
soon as possible.
Remote control problem
In the event of a remote control malfunction,
you can neither unlock nor lock your vehicle.
)
First of all, use the key in the driver's door
lock to unlock or lock your vehicle.
)
Then, contact a CITROËN dealer to check
the operation of the remote control and
replace the battery if necessary.
Page 35 of 164
2
!
Access
33
Lost keys
Visit a CITROËN dealer with the vehicle's V5 registration document and your personal
identification documents.
The CITROËN dealer will be able to retrieve the key code and the transponder code
required to order a replacement key.
Remote control
The high frequency remote control is a sensitive system; do not operate it while it is in your
pocket as there is a possibility that it may unlock the vehicle, without you being aware of it.
Do not repeatedly press the buttons of your remote control out of range and out of sight of
your vehicle. You run the risk of stopping it from working.
The remote control does not operate when the key is in the ignition, even when the ignition
is switched off.
Locking the vehicle
Driving with the doors locked may make access to the passenger compar tment by
the emergency services more difficult in an emergency.
As a safety precaution (with children on board), remove the key from the ignition when you
leave the vehicle, even for a shor t time.
Anti-theft protection
Do not make any modifications to the electronic immobiliser system; this could cause
malfunctions.
When purchasing a second-hand vehicle
Have the key codes memorised by a CITROËN dealer, to ensure that the keys in your
possession are the only ones which can star t the vehicle.
Page 37 of 164
2
!
Access
35
Doors
From outside
)
After unlocking the vehicle using the
remote control or the key, pull the door
handle.
From inside
)
Pull the front or rear door control to open
the door.
If the doors are locked, opening the driver's
door does not unlock the other doors.
- opening the driver's door unlocks the other
doors,
- the front passenger or rear doors must
then be unlocked manually using the front
locking control before they can be opened.
If a door or the boot is not closed
correctly, this warning lamp comes
on in the instrument panel until the
door in question or the boot is closed.
Opening
Closing
Locking/unlocking from
the inside
)
Press the button on the driver's door
towards the front to lock and towards the
rear to unlock the vehicle completely.
The buttons on the front and rear
passenger doors only lock /unlock the
door in question.
Page 38 of 164
Access
36
Boot
Opening
)
After unlocking the vehicle using the remote
control or the key, press the handle A
and
open the tailgate.
)
Pull the handle B
downwards to guide the
tailgate down,
)
release the handle and press the exterior
sur face of the tailgate gently to close it.
Closing
Page 44 of 164
!
Comfort
42
Door mirrors
The mirrors can be adjusted when the ignition
switch is in the "ON" or "ACC" position.
)
Move control A
to the right or to the left to
select the corresponding mirror.
)
Direct control B
in all four directions to
adjust the mirror.
When adjustment is complete, return control A
to the central position.
Adjustment
The mirrors can also be folded
manually.
However, you must never unfold them
manually
, other wise the mirrors may
not remain in place correctly when
driving.
Always use control C
to unfold them.
)
With the ignition switch in the "ON" or
"ACC" position: press control C
to unfold
them
)
With the ignition switch in the "LOCK"
position: press control C within
30 seconds
to fold them.
Electric folding/unfolding
Page 54 of 164
i
!
Driving
52
Starting - stopping the vehicle
- Position 1: LOCK
The steering is locked.
- Position 2: ACC
The ancillaries (radio, 12 V socket...) can
be used.
- Position 3: ON
Ignition on.
- Position 4: START
"Ready" lamp on.
Motor ready to drive the vehicle.
Ignition switch
)
Inser t the key in the ignition switch.
)
Turn the key to position 4 (START)
.
Starting
Stopping
)
Immobilise the vehicle.
)
Place the drive selector in position P
.
)
Turn the key to position 1 (LOCK)
.
)
Remove the key from the ignition switch.
)
Hold it in this position for a few
seconds until the " READY"
lamp
comes on accompanied by an
audible signal.
)
Release the key.
The key returns automatically to
position 3 (ON)
.
Do not attach any heavy objects to the
key as this could weigh down on it when
in the ignition switch and cause a fault.
If you use the ancillaries for a prolonged
period (with the key in the ACC
position),
you risk discharging the ancillaries
battery. Starting your vehicle will then no
longer be possible. Be aware
.
Page 60 of 164
i
i
i
Visibility
58
Daytime running lamps
Special daytime lighting so that the vehicle can
be seen more easily.
The daytime running lamps come on
automatically when star ting the motor, if no
other lighting is on.
They cannot be deactivated. With the main lighting control ring in the AUTO
position, the sidelamps and dipped beam
headlamps come on automatically, without any
action by the driver, when a low level of ambient
light is detected.
When the light returns to a sufficient level or the
wipers are switched off, the lighting is switched
off automatically.
The sensor is located at the base of the
windscreen.
Automatic illumination of headlamps
Automatic lighting off
When the lighting stalk is in the "AUTO"
position, if the ignition switch is in the "LOCK"
or "ACC" position or if the key has been
removed, the lighting switches off automatically
when the driver's door is opened
.
The initial setting is position "0"
.
Headlamp
adjustment
To avoid causing a nuisance to other road
users, the height of the halogen headlamps
should be adjusted according to the load in
the vehicle.
0.
Driver only or driver + 1 front passenger.
1 or 2.
4 people (including the driver).
3.
4 people (including the driver) + maximum
authorised load.
4.
Driver + maximum authorised load.
Although these lamps are located in
the same unit as the front foglamp,
they operate with a specific bulb.
Their use is covered by road vehicle
lighting regulations.
In foggy weather or in snow,
the sunshine sensor may detect
sufficient light. The lighting will not
come on automatically.
Do not cover the sunshine sensor,
the associated functions will no longer
be controlled.
Page 62 of 164
!
Visibility
60
Courtesy lamp
Position 1 "ON"
The cour tesy lamp is permanently on.
Position 2 "●"
The cour tesy lamp comes on when opening
a door or the boot; when the door or boot is
closed again, the lighting gradually dims for a
few seconds before going off.
However, the cour tesy lamp is switched off
immediately when the doors and boot are
closed and you lock the vehicle from the inside
or using the remote control.
Position 3 "OFF"
The cour tesy lamp is permanently off.
Before leaving the vehicle, ensure that
the cour tesy lamp is not on.
If left on, it discharges the ancillaries
battery, even if the main battery is
charged or on charge.
Starting your vehicle will then no longer
be possible.
