Page 4 of 164
.
Contents
Instrument panel 18
Indicator and warning lamps 19
Main battery state of charge indicator 26
Energy consumption/generation indicator 27
Distance recorder 28
Tr i p d i s t a n c e r e c o r d e r 2 8
Lighting dimmer 29
Ser vice indicator 29
Range indicator 30
Monitoring Familiarisation
Remote control key 31
Electric windows 34
Doors 35
Boot 36
Charging fl aps 37
Access
Front seats 38
Rear seats 40
Mirrors 42
Interior fi ttings 44
Heating and Ventilation 47
Air conditioning 49
Rear screen demist - defrost 51
Comfort
Star ting - stopping the vehicle 52
Manual parking brake 53
Drive selector 54
Driving
Lighting controls 56
Automatic illumination of headlamps 58
Headlamp adjustment 58
Wiper controls 59
Courtesy lamp 60
Visibility
Page 10 of 164
Familiarisation
8
Instruments and controls
1.
Parking brake.
2.
Drive selector.
3.
12 V accessory socket.
4.
Passenger’s airbag deactivation.
USB por t.
5.
Glove box.
6.
Cup holder.
7.
Windscreen demisting vents.
8.
Lighting and direction indicator stalk.
9.
Audio system.
10.
Hazard warning lamps switch.
11.
Centre vents.
12 .
Heating/air conditioning controls.
13.
Emergency or assistance call.
Page 17 of 164
.Familiarisation
15
Driving safely
P.
Parking.
Press the brake pedal to come out of
this position.
R.
Reverse.
N.
Neutral.
D.
Drive (for ward).
Drive selector
54
- Check that the drive selector is in position P
.
- Inser t the key in the ignition switch.
- Turn the key to position 4 (START)
.
- Hold it in this position for a few seconds,
until the " READY
" lamp comes on,
accompanied by an audible signal.
- Release the key.
The switch returns automatically to
position 3 (ON)
.
Starting the motor
52
- Stop the vehicle.
- Keep your foot on the brake pedal.
- Put the drive selector in position P
.
- Apply the parking brake.
- Turn the key anti-clockwise to the LOCK
position.
Stopping the motor
52
Page 23 of 164
1
Monitoring
21
Warning/indicator lamp
State
Cause
Action/Observations
Ready
(ready to move
off) On fixed,
accompanied by an
audible signal when it
comes on. The vehicle is ready to move off and
you can press the accelerator. The illumination period corresponds to the powering-
up of the vehicle.
Parking brake
On fixed. The parking brake is applied or not
properly released. Release the parking brake to switch off the warning
lamp, keeping your foot on the brake pedal.
Obser ve the safety recommendations.
For fur ther information on the parking brake, refer to
the "Driving" section.
Main batter y
charge (normal
or fast)
On fixed. The main battery is on charge. On completion of the charge, the lamp goes off.
Flashing. The charging cable is connected to
the vehicle but the main battery is not
yet charging. Check the connection of the charging cable.
Page 55 of 164
4
!
Driving
53
Manual parking brake
Applying
)
Pull the parking brake lever fully up to
immobilise your vehicle.
When parking on a slope, direct your
wheels against the kerb, apply the
parking brake, place the drive selector
in position P
and switch off the ignition.
Releasing
)
Pull the parking brake lever up gently,
press the release button then lower
the lever fully.
When the vehicle is being driven,
if the parking brake is still on or has
not been fully released, this warning
lamp comes on.
Page 56 of 164
Driving
54
P.
Park.
This position is used for star ting the
vehicle.
To come out of the P
position, you must
have your foot on the brake.
R.
Reverse.
N.
Neutral.
D.
Drive (For ward).
Drive selector
Selector positions
When you move the drive selector through the
grille to select a position, the corresponding
indicator is displayed in the instrument panel.
Displays in the instrument panel
With the motor running, P
appears in the
instrument panel screen.
)
Press the brake pedal to come out of
position P
.
)
Select for ward ( D
) or reverse ( R
) gear.
)
Release the parking brake.
)
Take your foot off the brake pedal, the
vehicle then moves off slowly to facilitate
manoeuvring.
)
Accelerate to go for wards or backwards.
)
"D"
or "R"
appears in the instrument panel
screen.
Moving off
Page 57 of 164
4
!
Driving
55
To tow your vehicle, the drive selector
must be in position N
, refer to "Practical
Information".
Parking the vehicle
To stop the motor, you must select position P
.
You must apply the parking brake to immobilise
the vehicle.
To remove the key from the ignition switch, the
drive selector must be in position P
.
Page 82 of 164
!
!
i
Practical information
80
Charging the main battery
)
Pull lever 1
, located at the bottom of
the dashboard, driver's side, to open
the access flap for the normal charging
socket (right hand side of the vehicle).
Normal charging
Before connecting, check that the
power point you want to use is standard
and is compatible with the current rating
on the charging cable control unit.
In all cases, it is recommended that
your installation be checked by
a qualified electrician.
There are two types of charging: normal and
fast.
Normal charging should be used in preference;
it is done from a domestic power point.
Fast charging is done at a compatible fast
charge station.
)
Apply the parking brake and put the drive
selector in position P
.
)
Switch off all electrical consumers and turn
the ignition switch to the "LOCK"
position.
Always use a genuine CITROËN
charging cable.
If the ambient temperature is
below -25 °C, charging may not be
possible.
