1
Monitoring
29
Service indicator
When the ignition is switched on, press
button A
several times in succession until
the ser vice indicator is displayed in the desired
units.
This point can be indicated in one of two ways:
- the miles (km) remaining,
- the time remaining to the next ser vice.
Operation
1.
The screen indicates that 620 miles
(1 000 km) or 1 month remain before
the next service.
2.
The screen indicates that the date for
the ser vice has been exceeded.
Every time the ignition is switched on,
the ser vice spanner is displayed for a
few seconds to remind you that a ser vice
should be carried out as soon as possible.
3.
Once the ser vice has been carried out,
the distance or the number of months to
the next ser vice is displayed again.
System which informs the driver when
the next ser vice is due in accordance with
the manufacturer's ser vicing schedule.
The point at which the next ser vice is due
is calculated from the last ser vice indicator
zero reset.
System for manual adjustment of the brightness
of the instruments and controls in relation to
the exterior brightness.
With the lighting on or off, press button A
to
select the function, then hold down to change
the intensity of the lighting of the instruments
and controls in "day" or "night" mode.
The intensity of the lighting increases each time
button A
is pressed.
When the lighting reaches the maximum
setting, press again to change to the minimum
setting.
When the lighting reaches the required
intensity, release button A
.
The setting is saved when you release button A
and retained when the ignition is turned OFF.
Lighting dimmer
