2011 AUDI R8 SPYDER lock

Always remember: Even though your vehicle is
equipped with an Advanced Airbag system, a
child should always ride in the seat properly restrained for its age and si ze.
_&. WARNING
Improperly installed child safety seats in­
crease the risk of serious personal injury
and death in a collision .
- Always make sure that the safety belt re­
tractor is locked when installing a child
safety seat . An unlocked safety belt re­
tractor cannot hold the child safety seat
in place during normal driving or in a
crash.
- Always buckle the child safety seat firmly
in place even if a child is not sitting in it.
A loose child safety seat can fly around
during a sudden stop or in a collision.
- The inflating airbag will hit the child
safety seat or infant carrier with great
force and will smash the child safety seat
and child against the backrest, door or
roof.
- Forward-facing child safety seats or in­
fant carriers installed on the front pas­
senger's seat may interfere with the de­ ployment of the airbag and cause serious
injury to the child.
- Always read and heed all WARNINGS
whenever using a child restrained in ave­
hicle is being used
r::;,page 138. Special
precautions apply when installing a child
safety seat on the front passenger seat
r::;, page 119, Child restraints on the front
seat -some important things to know.
_&. WARNING
-
Always take special precautions if you
must install a forward or rearward-facing
child restraint on the front passenger's
seat in exceptional situations:
- Whenever a forward or rearward-facing child restraint is installed on the front
passenger seat, the
PASSENGER AIR
BAG OFF
light must come on and stay on
whenever the ignition is switched on.
Child Safety 147
- If the PASSENGER AIR BAG OFF light
does not come on and stay on, perform
the checks described
r::;, page 128, Moni­
toring the Advanced Airbag System.
- If the PASSENGER AIR BAG OFF light
does not come on and stay on whenever
the ignition is switched on the inflating
airbag will hit the child safety seat or in­
fant carrier with great force and will
smash the child safety seat and child
against the backrest, door or roof. Have
the airbag system inspected immediately
by your Audi dealer.
- Improper installation of child restraints
can reduce their effectiveness or even prevent them from providing any protec­
tion.
- An improperly installed child restraint
can interfere with the airbag as it de­ ploys and seriously injure or even kill the
child.
- Always carefully follow the manufactur­
er's instructions provided with the child
safety seat or carrier.
- Never place additional items on the seat
that can increase the total weight regis­
tered by the weight-sensing mat and can
cause injury in a crash.
_&. WARNING
Forward-facing child restraints:
- Always make sure the forward-facing
seat has been designed and certified by
its manufacturer for use on a front seat
with a passenger front and side airbag.
- Never put the forward-facing child re­ straint up, against or very near the in­
strument panel.
- Always move the passenger seat into its
rearmost position in the seat's fore and
aft adjustment range, as far away from
the airbag as possible before installing
the forward-facing child restraint. The
backrest must be adjusted to an upright
position. •
•

148 Child Safety
-Make sure t hat the PASSENGER AIR BAG
OFF
light comes on and stays on all the
time whenever the ignition is switched on .
A WARNING
Rearward -fac ing ch ild restra ints:
- A ch ild in a rearward-facing child safety
seat installed on the front passenger
seat will be ser iously injured and can be
killed if the front airbag inflates - even
with an Advanced Airbag System.
- The inflating a irbag will hit the child
safety seat or infant carri er wit h great
force and w ill smash the ch ild safety seat
and child against the b ackrest, door or
roof.
- Alway s be espe cially caref ul if you must
ins tall a re arwa rd fa cing child s afety seat
on the front passenge r seat in exception ­
al circumstances .
- A tight tether st rap on a rearward-facing
child rest raint attached to the front pas ­
senger seat can put too much pressu re
on the weight-mat in the seat and reg is­
ter a heavier weight in the Advanced A ir­
bag System. The heav ier we ight regis­
tered can make the system work as
though an adult were on the seat and de­
ploy the Advanced Ai rbag when it must
be s uppressed causing ser ious o r even
f a tal inj ury to the child .
- Make su re that the
PASSENGER AIR BAG
OFF
light comes on and s tays on all the
t ime whe never the ignition i s switched
on.
- Never install a rearward facing child
safety seat on the front passenger seat
unless the
PASSENGER AIR BAG OFF
light comes on and stays on . If t he PAS·
SENGER AIR BAG OFF
light does not
come on and stay on the inflating airbag
will hit the child safety seat or infant car­
rie r with great fo rce and will smash the
child safety seat and child against the
backrest, door or roof. Have the airbag
system inspected immediately by your
au thori zed Au di d ealer .
Activating the convertible locking
retractor
Use the convertible locking retractor to se­
cu re a child re strain t.
Always heed the ch ild safety sea t manufactur­
er's instr uctions when installing a child re­
st ra in t in your veh icle . To a ctivate the conve r­
t ible lo cking re tractor:
.,. Place t he ch ild restraint on a seat .
.,. Slowly pu ll the belt
all the way out .
.,. Route i t around or th roug h the child re­
s train t belt pa th
~ .&, .
.,. Push the ch ild safety seat down with you r
full weight to get the safety be lt really tight.
.,. Insert the belt tongue into the buckle for
that seating position .
.,. Guide the safety belt back i nto the retractor
until the be lt lies flat and snug o n the child
safety seat.
"" Yo u should hear a "cl icking " noise as the
be lt winds back into the inertia ree l. Test the
convert ible lo cki ng re tr actor by pulling on
t he belt. You s hould no longer be ab le to
pull t he be lt out of the retrac to r. T he con ­
vertible locking retracto r is now activated .
.,. Make s ure that the red release button is fac ­
ing away from the child rest raint so that it
can be unbuckled quick ly.
.,. Pull on the belt to make sure the safety be lt
is properly tight and fastened so that the
s e at ca nnot move forwa rd or sideways more
than one inch ( 2.S cm).
A WARNING
Using the wrong child res traint o r an i m­
pr operly ins talled chi ld restraint can cause
se rious pe rsonal injury or deat h in a c rash.
- Always ma ke sure tha t t he safe ty belt re-
trac to r i s loc ked when insta lling a child
safety seat. An un locke d safety belt re­
tracto r cannot hold the child safety seat
in place dur ing norma l dr iving o r in a
crash.
- Always buckle the child sa fety seat firmly
-
in place even if a ch ild is not sitt ing in it. ~

A loos e chi ld safety seat can fly around
dur ing a sudden stop or in a crash.
- Always make sure the seat backrest to
wh ich the child restraint is installed is in
an upr ight position . Otherwise, the seat­
back wi th the child safety seat attached
to it could fly forward in the event of an
acc ident or other emergency situat ion.
- Always read and heed all WARNINGS
whenever using a child restrained in ave ­
hicle is being used
~ page 138. Special
precautions apply when installing a ch ild
safety sea t on the fron t passenge r sea t
~ page 119, Child restrain ts on the front
seat -some important things to know.
Deactivating the convertible locking
retractor
The convertible locking r etractor for child re ­
straints will be deactivated automatically
when the belt is wound all the way back into t he re trac tor.
~ Press the red button on the safety belt buck­
le . T he be lt tongue wi ll pop out of the buck ­
le.
~ Gu ide the sa fe ty belt all the w ay b ack into
its stowed posit ion.
A lw ays let the safety belt ret ract comp lete ly
into its stowed posit ion. The safe ty belt c an
now be used as an ord inary safety bel t wi th­
out the convert ible lock ing retractor for chi ld
restra ints .
If the convert ible locking retractor shou ld be
ac tivated inadver ten tly, the safety belt must
be unfastened and guided completely back in ­
to its stowed position to deactivate th is fea­
ture . If the convertib le locking retractor is not
deactivated, the sa fe ty belt will g radually be­
come tighter and uncomfo rtab le to wear .
A WARNING
Improperly insta lled child sa fe ty seats in ­
crease the risk of ser ious personal inju ry
and death in a collision.
Child Sa fet y 149
-Never unfasten the safety belt to deacti­
vate the convertible locking retractor for
child restraints while the vehicle is mov ­
ing. You would not be restrained and
could be serious ly inju red in an accide nt.
- Always read a nd heed all WARNINGS
wheneve r us ing a child restrained in ave ­
hicle is being used
Q page 138 . Special
prec autions app ly when insta lling a child
safety sea t on the fron t pa ssenger seat
Q page 119, Child restraints on the fron t
seat -some important things to know.
Additional Information
Sources of information about child
restraints and their use
T he re a re a number of sources of additiona l
in forma tion abo ut child re st ra in t se lec tion , in­
stalla tion and use:
N HTSA advises that the best ch ild safety seat
i s the one t hat fits you r ch ild and fits in you r
vehicle , and that yo u will use correct ly and
c onsistently.
Try before you buy !
U.S National Highway Traffic Safety Admin­
istration
Tel.: 1 -888 -327 -4236 (TTY: 1 -800 -424 -9153)
www . n htsa .gov
National SAFE KIDS Campaign
T el.: (202) 662-0600
www .safek ids .org
Safety BeltSafe U.S.A
Tel.: (800) 7 45-SAFE ( English)
Tel.: (800) 747-SANO (Span is h)
www .carseat .org
T ransport Canada Information Centre
Tel.: 1 (800) 333-03 71 o r call
1 (613) 998-8616 if you are in the Ottawa
area
www .tc .gc.ca/ roadsafety
Audi Customer CARE
Tel.: (800) 822-2834 •
•

150 Intelligent te chn olog y
Intelligent technology
Notice about data
recorded by vehicle
control modules
Your veh icle is not equipped with an Event Da­
ta Recorder (EDR), installed by some manu­
facture rs fo r the express p urpose o f capturing
data for retrieval after an accident or cras h
event. EDR's are sometimes called "crash re­
corders".
Some state laws restrict the retrieval or down­ loading of data stored by EDR 's that were in­
stalled in a vehicle for the express purpose of retrieving data after an accident or crash
event without the owner's consent.
A lthough yo ur vehicle is not equ ipped wit h an
EDR, it is equipped with a number of elect ron­
ic control modules for various v ehicl e systems
such as, for examp le, eng ine function, emis­
sion control, as well as for the airbags and
sa fety belts .
These electron ic co ntrol modules also record
vehicle-re lated data du ring norma l vehicle op­
er ation for diagno stic and repa ir purposes .
T he recording capacity of the elec tronic con­
trol modules is limited to data (no sound is re ­
corded) and only a small amount of data is ac­
tually recorded ove r a ve ry limited pe riod of
time and stored when a system fault or other condition is sensed by a cont ro l u nit. Some of
the data t hen stored may re late to vehicle
speed, direction, braking as we ll as restraint
syst em use and performanc e in the event of a
c rash or other condition. Stored data can only
be read and downloaded w ith special equip­
ment .
Electronic Stabilization
Program (ESP)
The Electronic Stabilization Program increas­
es driving stability .
Fig . 1 33 Ce nt er conso le wi th~ bu tto n
Intent and purpose
T he Anti-Lock Brake System (ABS), Elec tronic
D ifferential Lock (EDL) a nd Anti-Slip Regula ­
tion System (ASR) are integrated i n the Elec­
tronic Stabilization Program (ES P).
It increas ­
es control over the vehicle in handling condi­
tions close to the limit of "grip", such as when
acce lerat ing and cornering .
It reduces the r isk
of skidd ing under all road conditions and at
all speeds and improves vehicle stability .
When road condit ions are poor, ES P makes it
easier to start from a complete stop as well as
acce le rate a nd d rive up hills . E S P s witches o n
automatica lly when you start the engine. It
shou ld normally be activated at a ll t imes be ­
cause this ensures optimum veh icle stability .
Critical driving situations
Wi th an oversteering vehi cle ( the vehicle
tu rns too sharply and the rear wheels slide to­
ward the o utside of a cu rve), ESP primari ly
brakes the o utside front wheel, with an
un­
dersteering vehicle (the vehicle does not turn
sharp ly enough and pushes out of a curve) it
brakes the inside rear whee l or other addition­
al wheels. This brake inte rvent ion is accompa­
nied by noises .
If the speed of a wheel s lows down too m uch
rela tive to vehicle speed while braking and i t
starts to lock, brake pressure to this whee l is
reduced . This adjustment process can be felt ..,.

156 Intelligent technology
Dynamic energy management
While the veh icle is be ing driven , dynamic en­
e rgy management distributes the energy gen­
erated according to the needs of the individu­
a l components . It regu lates consumption, so
that more electrical energy is not being used
than is being generated and ensures an opti­ mal state of charge for the battery .
(D Tips
- But even energy management cannot
negate the limits of physics. Consider
that the power and life of a battery are li mited .
- If starting ab ility is threatened, you are
i nformed by a warn ing
<=> page 156,
Driver notification in the instrument
cluster display .
What you should know
The highest priority is given to maintaining
starting capability.
The battery is severely taxed in short-distance
driving, in city traffic and during the cold time
of year. Abu ndant electr ical energy is re­
qu ired, but only a little is generated . It is also
cr itical if the engine is not running and elect ri­
cal components are turned on. In th is in­
stance energy is being consumed but none is
being generated .
It is in precisely these situations that you w ill
notice energy management actively regulat­
ing the distrib ution of energy .
Vehicle stands for an extended period
If you do not drive your vehicle over a period
of severa l days or weeks, elect rical compo­
nents are gradually cut back o r switched off .
This reduces energy consumption and main­
tains starting capabi lity over a longer period.
Take into considerat ion that when you un lock
your vehi cle, some convenience functions,
such as the remote key or power seat adjust­
ment, may not be available. The convenience
functions will be available again when you
turn on the ignition and start the engine. With the
engine turned off
If you listen to the radio, for examp le, w ith
the engine turned off, the battery is being dis­
charged.
If starting capability is jeopardized due to en­
ergy consumption , a message appea rs in the
driver information display.
You have to start the engine to charge the batte ry.
With the engine running
Although electrical energy is generated when
the vehicle is being driven, the battery can be­
come discharged. This happens mostly when
little energy is being gene rated and a great
deal consumed and the battery's state of
charge is not optimal.
To bring the energy balance back into equili­
brium , consume rs which requ ire espec ially
large amounts of energy are temporar ily cut
back or sw itched off. Heating systems in par­
ticu lar require a great deal of energy. If you
notice, for example, that the heated seats or
the heated rear window are not heating, they
have been temporarily cut back or switched
off . These systems will be available again as
soon as the ene rgy balance has been restored.
You wi ll also notice that engine id le speed has
been increased slightly . Th is is normal and not
a cause for concern. By increasing engine idle
speed the additional energy required is gene r­
ated and the battery is charged .
Driver notification in the instrument
cluster display
If battery power drops into the range where it
can limit the ability of the engine to start, this
is shown in the instrument cluster display
with the following driver message:
(•i Low battery charge: battery will be
charged while driving
T h is not ificat io n r eminds you that the start ing
capability of the engine may be lim ited. As
soon as you start driving again, the battery .,..

166 Cleaning and protection
- Serious injuries can result if plastic parts
come loos e when the airbag is deployed.
- Always read and heed all WARNINGS and
the informat ion
¢ page 161.
(D Note
Clean ing agents containing solvents will
attac k the material and can change the
way it behaves .
Carbon-fiber parts
Applies to vehicles: with carbon-fiber parts
The carbon-fiber parts of your vehicle have a
pa inted surface . They do no t requi re any spe·
cial care and a re cleaned like plast ic parts
¢ page 165.
Fabrics and fabric coverings
Fabrics and fabr ic coverings (e.g . seats, doo r
tr im pane ls, etc.) should be cleaned at reg ular
inte rva ls with a vac uum cle aner . Th is removes
surface dirt particles which could become em·
bedded in the fabric through use. Steam
cleaners shou ld not be used, because th e
steam tends to push the dirt deeper into the
fabric and lock it the re.
Normal cleaning
Gene rally, we recommend usi ng a soft sponge
or a lint -free microfiber cloth to the clean fab ·
ric . Brushes should only be used for carpets
and floor mats, s ince other fabric s urfaces
could be harmed by brushes.
N ormal surface sta ins can be cleaned using a
comm ercia lly available foam cleaner. Spread
the foam on the surface of the fab ric with a
soft sponge and work it in gently. Do not satu·
rate the fabric. Then pat t he foam dry using
absorbent, d ry cloths (e .g . microfibe r cloth)
and vacuum it afte r it has dr ied comp lete ly .
Cleaning stains
Stains ca used by beverages (e.g. coffee, fruit
ju ice, etc. ) can be treated with a mild deter­
gent solut ion . App ly the detergent so lution
with a sponge. In the case of st ubbor n stains , a dete
rgent paste can be applied directly to
t h e stain and worked i nto the fabric. After·
wards, use copious amounts of clean water to
remove the rema ining detergent. Apply the
water wit h a damp cloth or sponge and pat
the fabr ic dry with an abso rbent, dry cloth.
Stains from choco late or ma keup sho uld have
detergent paste (e.g. ox-gall soap) rubbed in­
to them. Afterwards, remove the soap with
water (damp sponge) .
Alcohol can be used to treat sta ins from
grease, o il, lipstick o r a ballpoint pen . M elted
grease or dye must be patted
off using ab­
sorbent mater ial. It may be necessary to re ­
t reat the areas with de tergent paste and wa­
te r.
In the case of general soiling of the uphols­
te ry and cover mate rial, we recommend hir ing
a spec ia list t hat has the equipment to clean
the seat cove rs and othe r fabr ic surfaces by
shampooing a nd spray ext ra ction.
A WARNING
A lw ays rea d and heed all W ARNIN GS an d
the info rmation
¢ page 1 61.
@ Tips
Open Velcro fasteners on yo ur cl othing can
damage the sea t cover. Please make s ure
t h at Velc ro fas teners are cl osed.
Natural leather
Appl ies to vehicles: with natural leather
Audi mak es great efforts to maintain the
properties, natural look and feel of in terior
leather.
General
We offer many d iffe ren t types of leathe r o n
o ur vehicles . Most a re d iffe rent types of nappa
l eat her, which has a smooth s urfa ce a nd
c omes in var ious colo rs.
The intensity of the co lor determi nes the visu ­
al characterist ics and appea rance . If the su r­
f ace of the leather has a typ ica l natural look,
t h en the leather is a napp a le at her that has .,.

been left in a re latively natural condition. This
l eather offers particularly good comfort and
breathes well. F ine veins, closed grains, insect
b ites, skin folds, and subtle variations in color
remain visible. These characteristics demon­
strate that the mater ial is natural.
Natural nappa leather is not covered by a col­
or finish. It is therefore more sensitive to soil­ ing and wear, wh ich is something you need to
consider if children, animals or other factors
might prove to be particularly hard on the
leather.
By contrast, leather types that are covered by
a co lored finish layer are more durab le. This
has a posit ive effect on the leather's resist­
ance to wear and soiling in daily use. On the
other hand, the typical cha racte rist ics of natu­
r a l lea ther a re ba re ly or no t apparent. Howev ­
er, this does not mean that the leather itself
is of in ferior quality .
Care and handling
Because of the exclusive nature of the types of
leather that Audi uses and the ir unique prop­
er ties (such as sensitivity to o ils, grease, so il­
ing, etc.), you will need to be somewhat care­
fu l with these leathers, and a certain type of
care is required . For examp le, dark clot hing
materials can discolor leather seats (especial­
ly if such cloth ing is damp and was not dyed
correctly). Dust and d irt part icles in pores,
folds, and seams can have an abras ive effect
and can damage the leathe r su rface as well as
weaken seams.
The leather should be cleaned regularly as
needed . After having been used for a relatively
long t ime, your leather seats will acquire a
r ich aged finish. This is a characteristic of nat­
ura l leather and a sign of true quality.
In order to ma intain the va lue of th is natural
p roduct ove r the life of your vehicle, you
should follow the recommendations below :
«I) Note
- To keep your leather from bleaching out,
do not allow it to be exposed to bright
Cleaning and protec tion 167
sunlight for long periods of time . If you
have to leave the vehicle parke d outside
for long per iods, cover the leather to
protect it from direct exposure to s un­
light.
- Sharp objects on clothing, such as zip­ pers, rivets or sharp pieces on belts can
leave permanent scratches or scrape
marks on the surface of t he leather.
@ Tips
- After each time you clean the leather and
at regular intervals, use a leather preser­
vative creme that contains UV-blockers
and that works into the leathe r. Th is
creme w ill nour is h and mo istu riz e the
lea ther, helping it to breathe and s tay
s u pple. It also helps to build up a protec­
t ive coating on the sur face.
- Clean t he leather every 2 -3 mon ths,
and clean any areas that get soi led.
- Remove fresh marks made by ballpo int
pens, ink, lipstick, shoe pol ish, etc. as
soon as poss ible .
- P rese rve the color of the leather as need­
ed by using a specia l co lore d lea the r ca re
creme to touch up areas of uneven color .
Cleaning and caring for leather
upholstery and trim
Applies to vehicles : wit h natural leather
Natural leather requires special care and at­
tention .
Normal cl eaning
.,. Clean soiled areas with a slightly moistened
cotton o r woo len cloth .
More stubborn dirt
.,. More stubbor n di rt ca n be removed us ing a
cloth satu rated with a mild soap solut ion (2
t ablespoons mild liq uid soap).
.,. Never allow t he soap sol ution to saturate
t he leather, and make ce rtain that no water
soaks into the seams .
.,. Wipe
off the soap so lution with a soft, dry
cloth. ..,_ •
•

-Blend must contain not more than 15%
MTBE.
Seasonally adjusted gasoline
Many gasoline grades are blended to perform
espec ially we ll for winter or summer driving.
During seasonal change-over, we suggest that
you fill up at busy gas stat ions where the sea­
sonal adjustment is more likely to be made in
time .
(D Note
-Methanol fuels which do not meet these
requirements may cause corrosion and
damage to plastic and rubber compo­
nents in the fuel system .
- Do not use fue ls that fail to meet the
specified criter ia in this chapter.
- If you are unable to determine whether
or not a particular fue l blend meets the
specifications, ask your service station or
its fuel supp lier.
- Do not use fuel for which the contents
cannot be identified.
- Fuel system damage and performance
problems resulting from the use of fuels
different from those specified are not
the responsibility of Audi and are not
covered under the New Vehicle or the Emission Control System Warranties.
- If you experience a loss of fuel economy
or driveability and performance prob­ l ems due to the use of one of these fuel
blends, we recommend that you switch
to unblended fuel.
Gasoline additives
A major concern among many auto manufac ­
turers is carbon deposit build- up caused by
the type of gasoline you use.
Although gasoline grades differ from one manufacturer to another , they have certain
things in common. All gasoline grades contain
substances that can cause deposits to collect
on vital engine parts, such as fuel injectors
and intake valves. Although most gasoline brands include additives to keep engine and
Fuel supply and filling your fuel tank 171
fuel systems clean, they are not equally effec ­
tive .
A udi recommends using TOP TIER Detergent
Gasoline. For more information on TOP TIER
Detergent Gasoline, please go to the official
website (www.toptiergas.com).
After an extended period of using inadequate
fuels, built-up carbon deposits can rob yo ur
engine of peak performance.
Q) Note
Damage or malfunction due to poor fue l
quality is not covered by the Aud i New Ve­
hicle Limited Warranty.
Fuel tank
Fuel filler neck
The fuel filler neck is located on the right rear
side panel behind the fuel fille r flap.
If the unlocking system should fail, you can
still open the flap manually -for detailed in ­
structions see ¢
page 173.
You can find the fuel tank capacity of your ve­ hicle in
Technical Data ¢ page 228.
The label on the inside of the fuel fi ller flap
tells you the correct fue l for your vehicle. For
more information about fuel specifications,
see ¢
page 170.
Your vehicle fue l tank has an on -board refue l­
ing vapor recovery system. This feature helps
to prevent fuel vapors from escaping from the
tank and polluting the environment while you refuel your vehicle . In order to fill the tank
properly while protecting the environment,
please fo llow this refueling procedure careful­
ly.
_&. WARNING
Under normal operating conditions, never
carry additional fue l conta iners in yo ur car.
Gas canisters and other containers used to
transport f uel can be dangero us. Such con­
tainers, full or empty, may leak and could
cause a fire in a collis ion. If you must
•
•