Compartments in the door trims
There are storage compartments in the door trims.
& WARNING
Fig. 96 Storage
compartment in the
door trim
Always read and heed all WARNINGS => page 163, "Important
safety instructions on the side airbag system". •
Applies to vehicles : with sto rage net in footwe ll
Storage net in footwell
There is a storage net in the passenger's footwell.
Con tro ls a nd e quip
m en t
Fig . 97 Storage net in
passenger's footwell
Vehicle OP-eration
Seats and storage
(I) Tips
Do not keep any sharp or pointed objects in the storage net -they are
a personal injury risk.•
Applies to vehicles: w ith storage net in the front seatbacks
Storage net in the seatbacks
There is a storage net behind both front seatbacks.
(I) Tips
Fig. 98 Storage net on
the driver's seatback
Do not keep any sharp or pointed objects in the storage net -th is
increases the risk of personal injury .•
Vehicle care Do-it-yourselt service iTechnical data
-Cleaning and protection pn,,._____ _ __,____ ____________ _
(I] Tips
Keep silicone sprays off the windshield to avoid wiper smear in rain.•
Applies to vehicles: with steel whee ls (e.g. if refitted with winte r tir es)
Steel wheels
The wheels also have to be cleaned.
-Always include the hub caps and wheel rims when washing
your vehicle to remove road dirt, salt sprays and brake
dust.
If necessary, use a commercial wheel cleaner to remove accumulated
brake dust.
The wheel rims are easier to keep clean if they are regularly coated
with liquid wax.
Paint scratches should be touched up as soon as possible to prevent
corrosion~ page 210, "Touch-up paint".
& WARNING
• Moisture and ice on brakes may affect braking efficiency -
~ page 191, "General information". Test the brakes carefully
after each vehicle wash.
• Always read and heed all WARNINGS and the information
~page206. •
Applies to veh icles: w ith Cas t alloy whee ls
Cast (light) alloy wheels
Cast (light) alloy wheels require special care.
-Wash the wheels with a sponge or hose brush every other
week. -
For deep cleaning afterwards, use only a dedicated
acid
free cast alloy wheel cleaner.
- Rub a coat of
liquid wax onto the rims every three month.
Be sure to reach and treat all parts of the rim.
To preserve the decorative appearance of the cast alloy wheels, some
special care is necessary. In addition to road dirt and salt, brake dust
is also corrosive.
If left on for too long, brake dust can cause pitting.
Use only special
acid-free cleaners formulated for alloy rims. Safe
products are available at your authorized Audi dealer. Never leave the
cleaner on the rims longer than specified on the label. If not rinsed
off promptly, the acid contained in some cleaners can attack the
threads on the wheel bolts.
Never use abrasive or metal polishing cleaning agents.
If the protec
tive coating has been chipped, e.g. by kicked up road dirt, touch it up
as soon as possible.
& WARNING
• Moisture and ice on brakes may affect braking efficiency
~ page 191, "General information". Test the brakes carefully
each time you wash the vehicle.
• Always read and heed all WARNINGS and other information
~page 206. •
Body cavity sealing
The body cavity sealing does not need to be checked.
All body cavities which could be affected by corrosion have been thor
oughly protected at the factory.
This sealing does not require any inspection or additional treatment.
If any wax should seep out of the cavity when the ambient tempera
ture is high, it can be removed with a plastic scraper and a suitable
solvent. ..,
________________________________________________ T_i_re _ s_ a _ n_d_ w_ h_ e_ e_l_s __ _
Tires and wheels
Tires
General notes
Tires may be the least appreciated and most abused
parts of a motor vehicle.
T ir es may be the least appreciated and most abused pa rts of a motor
vehicle . Tires are, however, one of the most important parts of a
vehicle , pa rticul arly conside ring the comparat ive ly small patch of
rubber on eac h tire that assures that all-important contact between
you, your veh icle and the road.
Maintai ning t he cor rect tire pressu re, mak ing su re that your veh icle
and i ts tires do not have to carry more weight t han they can safely
hand le, avoid ing damage from road ha za rds and regularly inspecting
tires for damage includ ing cuts, s lashes irregular wea r and ove rall
condi tion a re the mos t important th ings that you can do to help avoid
sudden t ire failure including tread separation and blowouts.
Avoiding damage
If you have to d rive ove r a cur b or sim ilar obstacle, d rive very slowly
and as close as possible at a rig ht angle to the curb .
Always keep chemicals incl ud ing grease, oil, gaso line and brake f luid
o ff t he t ires .
Ins pect the ti res regularly for damage (cu ts, cracks o r blisters, e tc.) .
Remove any foreign bodies embe dded in the treads.
Storing tires
M ark tires w hen yo u remove t hem to indica te t he d ire ct io n of rota
tion . This ensures you to be ab le to mount them correctly when you
re insta ll them.
Whe n removed, t he wheels or tires should be sto red in a cool, dry and
preferably da rk p lace.
Safety first
Store tires in a v ertica l pos it io n if they a re not mount ed on rims, in a
hor izonta l posit ion if they are mounted on r ims.
New tires
N ew tires have to be broken in=> & .
Th e tre ad d epth of new ti res may v ary, accor ding t o th e type an d
make of t ire and the tread pattern .
Hidden damage
Damage to tires and rims is often not readi ly visible. If yo u notice
unu sual vib ra ti on o r the ve hicle pulls to one side, t his may in dica te
that one of the t ires has been damaged. The tires must be checked
im media tely by an auth oriz ed A ud i d eale r or qual ifie d wor ks hop.
Unidirectional tires
A un id irectional tire can be identified by arrows o n th e sidewall , th at
point in the direct ion the t ire is designed to rotate. You must fo llow
t he s peci fied dire ction o f ro tat io n . This is neces sary so t hat t hese
tires can deve lop their optimum cha racte ristics regard ing g rip, road
noise, we ar an d hy dropl aning res ist an ce. F o r more informat ion
:::>page 279 .
& WARNING
New tires or tires that are old , worn or damaged cannot provide
maximum control and braking ability.
• New tires tend to be slippery and must be broken in. To reduce
the risk of losing control, a collision and serious personal injuries, dri ve with special care for the first 350 miles (560 km).
• Driving with worn or damaged tires can lead to loss of control,
sudden tire failure , including a blowout and sudden deflation ,
crashes and serious personal injuries . Have worn or damaged tires
replaced immediately. _..
Vehicle care Technical data
lfflJ,.___T_ ir_e_ s _ a_ n _ d_ w_ h_e_ e_ ls _______________________________________________ _
(j)
®
®
U.S . DOT tire identification number
Audi Orig inal tire
Tire ply composition and materials used
Max imum load rating
Treadwear, traction and temperature grades
@ Maximum permissible inflation pressure
The tires and rims are essential parts of the vehicle's design. The tires
and r ims approved by Audi are spec ially matched to the characteris
tics of the vehicle and can make a major contribution to good road
holding and safe handling when in good condition and properly
inflated =>& .
We recommend that all work on tires and wheels be performed by an
authorized Audi dealer. They are familiar with recommended proce
dures and have the necessary special tools and spare parts as well as
the proper facilit ies for disposing of the old tires.
Authorized Audi dea lers have the necessary information about tech
nical requirements for installing or chang in g ti res and rims.
Replacing tires and wheels
Tires should be replaced at least in pairs and not ind ividually (for
example both front tires or both rear t ires together).
Be sure to read and heed the tir e pressure monitoring system*
information=>
page 264.
Always buy replacement radial tires that have the same specifications
as the tires approved for your veh icle by Audi . Replacement tires must
always have the same load rating specification as the original equip
ment or approved opt iona l tires listed in the table=>
page 249.
Audi-approved spec ification tires are specially matched to your
vehicle and its load limits, and can contribute to the important road
holding, driv ing characteristics, and safety of the vehicle. The table (=>
page
249) lists specifications of the tires approved for the Aud i
models covered by your Owner's Literature.
The tire pressure label located either on driver's side B-p illar or inside
the fuel filler flap(=>
page 249, fig. 172) lists the specifications of
the original equipment tires installed on your ve hicle at the time it
was manufactured.
Federal law requires tire manufact urers to place standardized infor
mation on the sidewall of all tires =>
page 2 5 7, fig. 17 5. This i nfor
mation identifies and describes the fundamental characteristics, the
quality grade of the tire and also provides a t ire identification number
for safety standard certification and in case of a reca ll.
Tire specifications
Knowledge of tire specificat ions makes it easie r to choose the correct
tires. Rad ial tires have the tire specifications marked on the s idewall,
for examp le:
P225 / 45 R 17 91H XL
This contains the following informat ion:
P I ndicates the tire is for passenger cars (where applicable)
225 Nominal tire width in mm of the tire from s idewall edge to side-
wa ll edge. In gene ral, the large r the number, the wider the tire
45 Height/width ratio in pe rcent (aspect ratio)
R Tire construction: Radial
17 Rim diameter code (in inches)
91 Load rating code
H Speed rating letter code
XL (or "xl", "EXTRA LOAD" or "RF") indicates that the tire is "Rein
forced" or an "Extra Load" tire
M+S (or "M/S") Indicates that the t ire has some mud and snow capa
bili ty
The tires could a lso have the information of direction of rotation
=>page 245.
________________________________________________ T_i_re _ s_ a _ n_d_ w_ h_ e_ e_l_s __ _
Tire manufacturing date
The m an ufac tu ring date is a lso indicated on the tire sidewall
(poss ibly on ly on th e
inner side of the w hee l):
"DOT . .. 2209 . .. " means, fo r example, that the tire was produced in
t he 22nd wee k of 20 09.
Speed rating (letter code)
The speed ra ting letter cod e on th e w heel s in dicates t he maxi mum
permissible road s peeds =>
& in "W inte r tires" on page 2 61.
P up to 93 mph (150 km/h)
Q up to 99 m ph (158 km/h)
R up to 1 06 mph (170 km/h)
S up to 1 10 m ph (180 km/h)
T up to 1 18 mph (1 90 km/ h)
U up to 124 mp h (200 km/ h)
H up to 130 mp h (210 km/ h)
V up to 149 mp h (240 km/ h)6>
Z over 1 49 mp h (24 0 km/h)6>
W up to 1 68 mph (270 km/h)6>
Y up to 186 m ph (298 km/h)6>
Your vehicle is normally factory equipped with t ires, which possess
ex cellen t driving chara cteris tics and give y our A udi op tim um driv ing
comfort. An elect ronic speed
Li miter=> page 20 will normally prevent
yo ur veh icle from going faste r tha n the ti re speed rating =>
&-
U.S. DOT Tire Identification Number (TIN) and tire
manufacture date
T hi s is the t ire's "serial number" . It beg ins wi th the letters "DOT" and
ind ic at es th at the t ire mee ts all f edera l stand ards. The nex t two
num bers or letters indicate the p lant where it was manufactured, and
the last four num bers represent the wee k and year of man ufacture .
For example, t he nu mbers 2209 mean tha t th e tir e was prod uced in
Gl For tires w ith a max im um speed capab ili ty ove r 149 mph (2 40 km/ h), tire
manufac tur ers sometimes use the letters "ZR."
Safety first
t he 22nd week of 2009 . The other numbers are marketing codes that
ma y or m ay not be use d b y the ti re manu facture r. This i nform ation is
used to contact consumers if a tire defec t requires a recall.
Audi Original tire
Tires with the ide ntificat ion "AO" or "RO" have been specially
m at ched w ith yo ur Audi. We recommend using on ly these tires
because t hey meet the highest standards regard ing safety and
dr iv ing c haracteris tic s when used cor rect ly. Yo ur authorize d Audi
dealer w ill gladly provide you wi th m ore information .
Maximum Load Rating
Thi s number ind icates the maxim um load in kilograms and pounds
that can be carried by the tire.
Tire quality grading for treadwear, traction, and
temperature resistance
Tread wear, traction and temperat ure grades=> page 260.
Maximum Permissible Inflation Pressure
Thi s number is the greatest amount of air pressure that sho uld ever
be pu t in the tire under norm al dri ving cond itions .
& WARNING
• Using incorrect or unmatched tires and/ or wheels or improper
tire and wheel combinations can le ad to loss of control , collision
and seriou s personal injury.
• Always use tires, rims and wheel bolts that meet the specifica
tions of original factory -installed t ires or other combinations that
have been specifically approved by the vehicle manufacturer .
• Tires age even if they are not being used and can fail suddenly,
especially at high speeds. Tires that are more than 6 years old can
only be used in an emergency and then with special care and at lower speeds.
• Never mount used tires on your vehicle if you are not sure of
their "previous history." Old used tires may have been damaged
~
Vehicle care Technical data
________________________________________________ T_i_re _ s_ a _ n_d_ w_ h_ e_ e_l_s __ _
& WARNING (co ntinued )
• Snow chain s are available in different sizes. Always make sure
to follow the instructions provi ded by the snow chain manufac
turer.
• Wh en driving with snow cha in s never drive fa ster than the
speed permitted for your specific snow chains .
• Always observe local regulations.
0 Note
• Remove snow chains before d riving on roads not cove red w it h
snow to avoid damaging t ires and wearing t he snow chains down
unnecessar ily .
• Snow chains, which come into direct contact wi th the wheel rim,
can scratch or damage it . The refore, make s ure that the snow chai ns
are sui tably covered. Chec k the pos it ion o f the snow cha ins afte r
driving a few yards and correct if necessary . Follow the instructions
from t he snow chain man ufacturer when doing so .
[ i] Tips
• Where snow chains are mandatory on certa in roads, this normally
also app lies to ve hicles wi th A ll W hee l Dr ive.
• If snow chains are installed, the tire p ress ures s houl d not be
sto red in the tire pressure moni to ring system (TPMS) . Otherwise the
system could malfunction ~
page 267. •
Wheel bolts
Wheel bolts must al ways be tight ened to the c orrect
torqu e.
The desig n of whee l bolts is matc he d to the fa ct ory in stalled rims. If
different r ims are fitted, the cor rect wheel bo lts wi th t he r igh t length
and correctly s haped bolt hea ds must be used . Thi s ensures that
Safety first
wheels are fitted securely and that the brake system funct ions
cor rectly .
I n certa in circumstances, yo u may not use wheel bo lts from a
different vehicle -even if it is the same mo del.
& WARNING
Improperly tightened or maintained wheel bolts can be come
loose causing loss of control, a collision and serious personal
injury.
• Always keep the wheel bolts and the threads in the wheel hubs
clean so the wheel bolt s can turn easily and be properly tightened .
• Never grease or oil the wheel bolts and the th reads in the wheel
hub s. They can become loose while driving if greased or oiled, even
if tightened to the specified torque.
• Only use wheel bolt s that belong to the rim being installed .
• Never use different wheels bolts on your vehicle .
• Always maintain the correct tightening torque for the wheel
bolts to reduce the risk of a wheel loss. If the tightening torque of
the wheel bolts is too low, they can loo sen and come out when the
vehicle is moving . If the tightening torque is too high , the wheel
bolt s and thread s can be damaged and the wheel can become
loose.
0 Note
T he specified torq ue for the wheel bo lts is 90 ft lb (120 Nm) with a
t o le rance of ± 7,4 ft lb( ± 10 N m). Tor qu e wheel bo lts diagonally.
After cha nging a wheel, the torque must be checked as soon as
pos sible wi th a t orque w rench -prefer ably by an auth oriz e d Aud i
dealer or qualified workshop .•
Vehicle care Technical data
_____________________________________________ W __ h_a_ t_ d_o_ I_ d_o _ n_ o_ w _ ? __ _
• Pull the reve rsible b lade from the screwdriver before you use the
hexagon al so cke t in the handle to turn t he whee l bolts .
• When mounting tires with
unidirectional tread design make sure
t he t read pa ttern is po inte d the r ig ht way =:>
page 2 79.
• The wheel bo lts shou ld be clean and easy to turn. Check for dirt
and corrosion on the mat ing surfa ces of both the whee l and the hu b.
Remove all d irt from these s urfaces before remounting the whee l.•
Tires with unidirectional tread design
Tires with unidirectional tread design must be mounted
with their t read pattern pointed in the right direction .
Using a spare tire w ith a tread pattern intended for
u se in a specific direction
When using a spare tire w ith a tread pattern intended for use in a
spec ific direction, please note t he fo llow ing:
• The direct ion of rotation is marked by an arrow on the side of the
tire.
• If the spare tire has to be installed in the incorrect direction in the
event of a flat ti re, use the spare tire only temporari ly since the tire
wi ll not be able to achieve its optimum pe rformance characterist ics
with regard to aq uaplaning, noise and wear .
• We recommend that particular attention be paid to this fact
during wet wea ther and that you adj ust you r speed to match road
conditions .
• Rep lace t he flat tire w ith a new one and have it ins talled on your
vehicle as soon as poss ible to restore the handling advantages of a
properly pointed direction -dependent tire .•
Safety first
Notes on wheel change
Please read the information =:> page 257, "New tires and rep lacing
ti res and wheels" if yo u are go ing to use a sp are t ire wh ich is diffe rent
from the tires on your vehicle.
After you change a tire:
• Che ck the tire pres sure on the spare immediately after
mounting .
• Have the wh eel bolt tight ening t orque ch ecked with a torque
wrench a s soon as poss ible by your authorized Audi de aler or a qual
ified servi ce station.
• On steel and allo y wheel rim s, the wheel bolts are co rrectl y
tightened with a torque of 90 ft lb (1 20 Nm ).
• If you not ice while ch anging a tire that the wheel bolt s are
corroded and difficult to turn, then they should be r eplaced before
yo u che ck the tightening torque.
• Repla ce the flat tire with a new one and have it installed on your
vehicle a s soon a s po ssible . Remount the wheel c over.
Until then, drive with e xtra care and at reduced speed s.
& WARNING
• If you ar e going to equip your vehicle w ith tire s or rims which
differ from tho se which were factor y installed, then be sure t o
read the information =:>
page 257, "New tires and replacing ti re s
and wheels ".
• Alway s make sure the damaged wh eel or even a flat t ire and
the jack and tool kit a re properly secured in the lugg age compart
ment and ar e not loo se in the pa ssenger compartm ent .
• In an accident or sudden maneuver th ey could fly forward ,
injur ing anyone in the vehicle .
• Alway s store damaged whee l, jack and t ools se cure ly in
luggage compartment. Otherwise, in an accident or sudde n
Vehicle care Do-it-yourself service Technical data
___________________________________________ A_ l!;:p ...:...h .:..: a:.:.. b.::....:: e..:t ..:..ic ::.. a:.:. l :....:..: in....:.-=: d..:e :.:.x..:.__ __
Replacing a sound system .... ... .. .. . 302
Replacing light bu lbs ... .. ... ... ..... 285
Replacing tires and wheels ............ 258
Replacing windshield wiper blades ...... 69
Reporting Safety Defects ......... .... 133
Reset button ........................ 10
Resetting remote control ....... .. ..... 43
Retractor ..... ...... .. .. .. .... ..... 139
Reverse
Automatic transmission .... .. .....
115
Rims
Cast alloy ...................... .
212
Replacing ....................... 257
Steel rims .................... .. . 212
Roof rack
Attachment points w ith separate roof rack
system ................ .........
87
Loading .. .. .. ... .... ... .. .. ..... 88
Mounting locations ........... .... . 88
Safe mounting ............... ..... 86
Roof weight .... .. .. ............. .... 88
s
S tronic ........ ...... .. ... ........ 115
Driving Notes .................... 117
Emergency program ........... ... 121
Kick-down .. ............ ........ 120
T i ptronic ... .. ... ... ...... ....... 119
Tipt ronic controls on the steering wheel .
120
SAFE ............................... 10
Safe driving habits ..... .. .. .. .. ..... 124
Safety belt position .... .... ......... 140
Safety belt height adjustment .. .. .. 142
Safety belts worn by pregnant women ...
141
Safety belt pretensioner ........... ... 143
Service and disposal .............. 144
Safety belt warning light ......... 15, 135
Safety belts . ...... .............. ... 139
cleaning ..................... ... 217
Danger to passengers who do not wear a
safety belt .................. ...
13 7
Fastening .. .. .......... ......... 139
height adjustment ....... ...... .. .
142
Improperly worn ................. 143
Not worn ....................... 137
Safety belt position ............... 140
Safety instructions .. .. ... ..... .. . 138
Securing child safety seats ......... 177
Spe cial considerat ions fo r pregnant
women ................ .... .. ..
141
Unfastening .. ................. .. 142
Warning/indicator light ........... 135
Why YOU MUST wear them .... 135, 136
Worn properly ................... 138
Launch Control Program .......... . 120 S f
S l
t l
l
k
11
a ety compliance sticker ............. 294
e ec or ever oc . . . . . . . . . . . . . . . . 6
Safety equipment .... ............. ..
124 Selector lever positions ........ ... . 115
Safety features for occupant restraint and
protection .................. ...
124
Safety guidelines
Seat adjustment ................. .
73
Safety instructions
Engine compartment ..... ..... .. .
226
for side curtain airbags ............ 166
for using child safety seats ......... 170
for using safety belts ............. 138
Monitoring the Advanced Airbag System .
158
Safety lock
Ignition key, automatic transmission
106
Seat adjustment
Driver's seat ................ .... ..
73
Front passenger's seat ............. 7 4
Front seats ... ..... ...... ...... ...
73
Head restraints .................. 128
Head restraints, front seat .......... 77
Lumbar support .. .. ............... 77
Manual controls .. .. .... ...... ..... 7 4
Manual seats ....... .......... .. ..
74
Power seat .. ..... ................ 75
Seat be lts
Why YOU MUST wear them . . . .
135, 136
See also Safety belts ...... .. ... .. . 135
Seating capacity ....... ...... ... . .. . 135
Seating pos it ion
Driver .............. ... .. .... ...
126
Front passenger ................ .. 127
How to adjust the front seats ....... 12 7
Incorrect seat position .. ..........
129
Occupants .. ................... . 126
Rear passengers ................ . 128
Controls and equip
ment Safety first Vehicle operation
Vehicle care Do-it-yourself service Technical data