2011 Alfa Romeo MiTo Owner handbook (in English)

32GETTING TO KNOW YOUR CAR
MENU ITEMS
Menu
This item allows you to access the Set-up Menu.
Press the + or – button to select the various Menu items.
Hold down the MENU ESC button to return to the standard screen.
Speed beep (Speed limit)
This function may be used to set the car speed limit (km/h or
mph); when this limit is exceeded the driver is alerted. To set the
speed limit, proceed as follows:
– briefly press the MENU ESC button, the display will show the
words (Speed Beep);
– press button + or – to select speed limit activation (On) or de-
activation (Off);
– when the function is activated (On), select the desired speed
limit by pressing + or – and then press MENU ESC to confirm.IMPORTANT The speed limit can be set at between 30 and 200
km/h, or 20 and 125 mph depending on the selected unit of mea-
surement, see paragraph “Units of measurement”. The setting will
increase/decrease by five units each time button +/– is pressed.
Hold down the +/– button to increase/decrease the setting rapid-
ly. Complete the setting by briefly pressing the button when you
approach the required setting.
– briefly press the MENU ESC button to go back to the menu screen
or hold the button down to go back to the standard screen with-
out storing the new settings.
To cancel the setting, proceed as follows:
– briefly press MENU ESC: (On) will flash on the display;
– press the – button: (Off) will flash on the display;
– briefly press the MENU ESC button to go back to the menu screen
or hold the button down to go back to the standard screen with-
out storing the new settings.

GETTING TO KNOW YOUR CAR33
1
Headlight sensor (Automatic/dusk sensor
headlights sensitivity adjustment)
(for versions/markets, where provided)
This function enables the headlights to come on or go off depending
on external lighting conditions.
The sensitivity of the dusk sensor can be adjusted according to 3
levels (level 1= minimum sensitivity, level 2= average sensitivi-
ty, level 3= maximum sensitivity); the greater the sensitivity set,
the less the external light variation needed to control turning on
the lights (e.g. with a level 3 setting at sunset the headlights are
expected to come on in respect of levels 1 and 2).
Proceed as follows to set:
– briefly press MENU ESC: the previously set level will flash on the
display;
– press + or – to change the setting;
– briefly press the MENU ESC button to go back to the menu screen
or hold the button down to go back to the standard screen with-
out storing the new settings.
Rain sensor
(Rain sensor sensitivity adjustment)
(for versions/markets, where provided)
With this function it is possible to adjust the rain sensor sensitivi-
ty according to 4 levels.
To set the required sensitivity level proceed as follows:
– briefly press MENU ESC: the previously set sensitivity level will
flash on the display;
– press + or – to change the setting;
– briefly press the MENU ESC button to go back to the menu screen
or hold the button down to go back to the standard screen with-
out storing the new settings.

34GETTING TO KNOW YOUR CAR
Trip B data (Trip B enablement)
Through this option it is possible to activate (On) or deactivate
(Off) the Trip B (partial trip) display.
For further information see the “Trip computer” paragraph.
For activation / deactivation, proceed as follows:
– briefly press MENU ESC: (On) or (Off) will flash on the display
(according to previous setting);
– press + or – to change the setting;
– briefly press the MENU ESC button to go back to the menu screen
or hold the button down to go back to the standard screen with-
out storing the new settings.
Set time (Clock)
With this function it is possible to set the clock through two sub-
menus: “Time” and “Mode”.
Proceed as follows:
– briefly press MENU ESC: the display will show two sub-menus
“Time” and “Mode”;
– press + or – to switch between the two sub-menus;
– once you have selected a sub-menu, press MENU ESC briefly;
– when accessing the “Time” submenu: briefly press MENU ESC:
“hours” will flash on the display;
– press + or – to change the setting;
– briefly press MENU ESC: “minutes” will flash on the display;
– press + or – to change the setting.
IMPORTANT The setting increases or decreases by one unit each
time + or – is pressed. Hold down the button to increase/decrease
the setting rapidly. Complete the setting by briefly pressing the but-
ton when you are close to the required setting.

GETTING TO KNOW YOUR CAR35
1
– when accessing the “Mode” submenu: briefly press MENU ESC:
the previously set display format will flash on the display;
– press + or – to select “24h” or “12h”.
When you have made the required settings, briefly press MENU
ESC to go back to the sub-menu screen or hold the button down
to go back to the main menu screen without storing the new set-
tings.
– hold down MENU ESC to go back to the standard screen or main
menu, depending on which point in the menu you have reached.Set date
With this function it is possible to update the date (day - month -
year).
To update the date proceed as follows:
– briefly press MENU ESC: “year” will flash on the display;
– press + or – to change the setting;
– briefly press MENU ESC: “month” will flash on the display;
– press + or – to change the setting;
– briefly press MENU ESC: “day” will flash on the display;
– press + or – to change the setting.
IMPORTANT The setting increases or decreases by one unit each
time + or – is pressed. Hold the button down to increase/decrease
the setting rapidly. Complete the setting by briefly pressing the but-
ton when you approach the required setting.
– briefly press the MENU ESC button to go back to the menu screen
or hold the button down to go back to the standard screen with-
out storing the new settings.

36GETTING TO KNOW YOUR CAR
First page (Display of information on the
initial screen)
(for versions/markets, where provided)
This function allows you to choose the information you would like
to see on the main screen. You can view the date or the trip
mileage.
Proceed as follows:
– briefly press MENU ESC: “Initial page” will appear on the dis-
play;
– briefly press MENU ESC once again to show the display op-
tions: “Date” and “Engine info”;
– press + or – to select the information you wish to see on the
main page of the display;
– briefly press the MENU ESC button to go back to the menu screen
or hold the button down to go back to the standard screen with-
out storing the new settings.
When the key is turned to MAR and the initial check stage is over,
the display will show the information selected via the “initial page”
menu function.
See radio (Repeat audio information)
With this function the display repeats information relevant to the
sound system.
– Radio: tuned radio station frequency or RDS message, automatic
tuning activation or AutoSTore;
– audio CD, MP3 CD: track number;
– CD Changer: CD number and track number.
To display (On) or remove (Off) radio system info proceed as
follows:
– press MENU ESC briefly: (On) or (Off) will flash on the display
(according to previous setting);
– press + or – to change the setting;
– briefly press the MENU ESC button to go back to the menu screen
or hold the button down to go back to the standard screen with-
out storing the new settings.

GETTING TO KNOW YOUR CAR37
1
Autoclose (Automatic door lock operation
with car running)
When activated (On), this function automatically locks the doors
when the car speed exceeds 20 km/h.
Proceed as follows to switch this function on or off:
-– briefly press MENU ESC to display a submenu;
– briefly press MENU ESC: (On) or (Off) will flash on the display
(according to previous setting);
– press + or – to change the setting;
– briefly press the MENU ESC button to go back to the submenu
screen or hold the button down to go back to the main menu screen
without storing the new settings;
– hold down MENU ESC to go back to the standard screen or main
menu, depending on which point in the menu you have reached.
Units (Set unit of measurement)
This function may be used to set the units of measurement via
three submenus: “Distances”, “Fuel consumption” and “Temper-
ature”.
To set the required unit of measurement proceed as follows:
– briefly press MENU ESC to display the three sub-menus;
– press + or – to switch between the three sub-menus;
– once you have selected a sub-menu you wish to update, press
MENU ESC briefly;
– when accessing the “Distance” submenu: briefly press MENU
ESC: either “km” or “mi” will appear on the display (according
to the previous setting);
– press + or – to change the setting;
– when accessing the “Fuel consumption” submenu: briefly press
MENU ESC: either “km/l ”, “l/100km” or “mpg” will appear
on the display (according to the previous setting);

38GETTING TO KNOW YOUR CAR
if the distance unit of measurement is set as “km”, the display en-
ables the setting of the fuel consumption unit (km/l or l/100)
to show the amount of fuel consumed.
If the distance unit of measurement is set as “mi” the fuel con-
sumption unit of measurement will be displayed in “mpg”.
– press + or – to change the setting;
– when accessing the “Temperature” submenu: briefly press MENU
ESC: either “°C” or “°F” will appear on the display according to
the previous setting;
– press + or – to change the setting;
When you have made the required settings, briefly press MENU
ESC to go back to the sub-menu screen or hold the button down
to go back to the main menu screen without storing the new set-
tings.
– hold down MENU ESC to go back to the standard screen or main
menu, depending on which point in the menu you have reached.Language (Selecting the language)
Messages on the display can be shown in the following languages:
Italian, English, German, Portuguese, Spanish, French, Dutch, Turk-
ish and Brazilian
To set the required language proceed as follows:
– briefly press MENU ESC: the previously set “language” will flash
on the display;
– press + or – to change the setting;
– briefly press the MENU ESC button to go back to the menu screen
or hold the button down to go back to the standard screen with-
out storing the new settings.

GETTING TO KNOW YOUR CAR39
1
Buzzer volume (Adjusting the
failure/warning buzzer volume)
With this function the volume of the buzzer accompanying any fail-
ure/warning indication can be adjusted (according to 8 levels).
To adjust the volume proceed as follows:
– briefly press MENU ESC: the previously set volume level will flash
on the display;
– press + or – to change the setting;
– briefly press the MENU ESC button to go back to the menu screen
or hold the button down to go back to the standard screen with-
out storing the new settings.
Button vol. (Button volume adjustment)
With this function it is possible to adjust (to eight levels) the vol-
ume of the acoustic signal sounding when the MENU ESC button
is long pressed to exit a sub-menu and return to the standard menu.
To set the desired volume, proceed as follows:
– briefly press the MENU ESC button: the previously set volume
level will be displayed;
– press the button + or – to adjust the volume; an acoustic sig-
nal equal to the volume level being selected is sounded during this
adjustment;
– briefly press the MENU ESC button to go back to the previous
screen or hold the button down to go back to the standard screen
without saving.
On versions with reconfigurable multifunction display, the volume
level is represented by bars.
Belt buzzer (Buzzer activation
for S.B.R. indication)
This function can only be displayed after an Alfa Romeo Authorised
Service has deactivated the S.B.R. system (see the paragraph
on“S.B.R. system” in chapter 2).