2011 Acura TSX light

Operating the Switches Around the Steering Wheel
Fog Lights
107
Controls
Fog Lights
When the low beam headlights are on, turn
the fog light switch on to use the fog lights.
Fog Lights
When the fog lights are on, the indicator in the
instrument panel will be on.
They go off when the headlights turn off, or when
the daytime running lights are on.
Indicators


P. 6 4
Daytime Running LightsThe high beam headlights and indicator come on slightly dimmer than normal.
The ignition switch is in ON t
II
.
The headlight switch is off, or in t
.
The parking brake is released. t
The lights remain on even if you set the parking brake. Turning off the ignition
switch will turn off the daytime running lights.
The high beam headlights return to the original brightness once the headlight
switch is turned on.
Fog Light Switch

Operating the Switches Around the Steering Wheel
Brightness Control
109
Controls
Brightness Control
When the parking lights are turned on and
the ignition switch is in ON
II
, you can
use the brightness control knob to adjust
instrument panel brightness.
Brighten: Turn the knob to the right.
Dim: Turn the knob to the left.
You will hear the beeper when the brightness
reaches minimum or maximum. The multi-
information display will return to its original
state several seconds after you adjust the
brightness.
Brightness level indicator
The brightness level is shown on the multi-
information display while you are adjusting it.
As the brightness level increases to the right,
the instrument panel gets brighter.
Brightness Control
Instrument panel brightness varies, depending
on whether the exterior lights are on or off. The
instrument panel dims to reduce glare when they
are on.
Pressing either
(information) button
switches the display.
If you turn the knob to the right until the brightness
display is up to max, the beeper sounds. This cancels
the reduced instrument panel brightness when the
parking lights are on.
The brightness can be set differently for when the
exterior lights are on, and when they are off.
Control Knob

Operating the Switches Around the Steering Wheel
Driving Position Memory System*
112Controls
1. Adjust the driver's seat to the desired
position, and turn the ignition switch to
ON
II
.
2. Press the SET button.
You will hear the beeper, and the
memory button indicator light will blink.
3. Press memory button
1
or
2
within five
seconds of pressing the SET button.
Once the seat position has been
memorized, the indicator light on the
button you pressed stays on.
Storing a Position in Memory
Automatic transmission models 1. Move the shift lever to
P
.
All models 2. Apply the parking brake.
3. Press a memory button (
1
or
2
).
You will hear the beeper, and the
indicator light will blink.
The seat will automatically move to the
memorized position. When it has finished
moving, you will hear the beeper, and the
indicator light stays on.
Recalling the Stored Position
Storing a Position in Memory
After you press the SET button, the storing
operation will be canceled when:
You do not press the memory button within five tseconds.
You readjust the seat position before the double- tbeep.
You turn the ignition switch to any position texcept ON
II.
Recalling the Stored Position
The seat will stop moving if you:
Press the SET button, or a memory button ( t
1 or
2).
Adjust the seat position.
t Automatic transmission models Shift into any position except t
P.
Manual transmission models Release the parking brake. t
Memory Button 1
Memory Button 2
Set ButtonMemory Buttons

Adjusting the Mirror
114Controls
Interior Rearview MirrorAdjust the angle of the rearview mirror when you are sitting in the correct driving
position.
When driving after dark, the automatic
dimming rearview mirror reduces the glare
from headlights behind you. Press the AUTO
button to turn this function on and off.
When activated, the AUTO indicator comes
on.
Adjusting the Mirror
Keep the inside and outside mirrors clean and
adjusted for best visibility.
Adjust the mirrors before you start driving.
Adjusting the Seat Positions


P. 11 6
Automatic Dimming Rearview Mirror
The auto dimming function cancels when the shift
position is in R.
Automatic Dimming Rearview Mirror
You can adjust the door mirrors when the
ignition switch is in ON
II
.
Mirror position adjustment
L/R selector switch: Select the left or right
mirror. After adjusting the mirror, return the
switch to the center position.
Mirror position adjustment switch: Press
the switch left, right, up, or down to move
the mirror.
Door Mirrors
Indicator Sensor
Auto Button
Adjustment Switch
Selector Switch

125
Interior Lights/Interior Convenience Items
Controls
Interior Lights
ON
The interior lights come on regardless of
whether the doors are open or closed. Door activated
The interior lights come on in the following
situations:
When any of the doors are opened. t
You unlock the driver's door. t
You remove the key from the ignition t
switch. OFF
The interior lights remain off regardless of
whether the doors are open or closed.
Interior Light Switches
In the door activated position, the interior lights
fade out and go off about 30 seconds after the
doors are closed.
The lights go off after 30 seconds in the following
situations:
When you unlock the driver's door but do not topen it.
When you remove the key from the ignition tswitch but do not open a door.
You can change the interior lights dimming time.
Customized Features


P. 8 0
The interior lights go off immediately in the
following situations:
When you lock the driver's door.
tWhen you close the driver's door with the key in tthe ignition switch.
When you turn the ignition switch to ON t
II.
If you leave any of the doors open without the key
in the ignition switch, the interior lights go off after
about 15 minutes.
Interior Light Switches Map Lights
The map lights can be turned on and off by
pressing the lenses.
Map Lights
When the ceiling light switch is in the door activated
position and any door is open, the map light will
not go off when you press the lens.
FrontRear
On
On
Door Activated PositionDoor Activated Position
Off
Off

Interior Lights/Interior Convenience Items
Interior Convenience Items
126Controls
Interior Convenience Items
Glove Box
Pull the handle to open the glove box. You
can lock the glove box with the master key.
Glove Box
The glove box light comes on when the parking
lights are on.
WARNING
An open glove box can cause serious
injury to your passenger in a crash, even if
the passenger is wearing the seat belt.
Always keep the glove box closed while
driving.
Detachable shelf
The shelf in the glove box is detachable.
To remove it, disengage the tabs.
ShelfGlove Box
To L o c k

Interior Lights/Interior Convenience Items
Interior Convenience Items
127
Continued
Controls
Console Compartment
Pull the handle to open the console
compartment.
To use the console lid as an armrest, slide it
to the desired position while pulling up the
release lever.
You can keep beverage bottles and cans cool
with the air conditioning system.
1. Turn the dial counterclockwise to open the
air vent in the console compartment.
2. Turn on the climate control system and
adjust the temperature to cool.
3. Set the mode control
or
.
The cool air is diverted through the air
vent.
Console Compartment
Use only resealable containers or keep unopened
cans in the console compartment.
Spilled liquids can damage the upholstery and
electrical components in the console compartment.
When the heater begins to divert warm air, the
airflow into the console compartment is shut off.
Close
Open

Interior Lights/Interior Convenience Items
Interior Convenience Items
128Controls
Beverage Holders
Front seat beverage holders
Press the raised detent to open the lid. To
close the lid, push it down until it latches. Rear seat beverage holders
Fold the armrest down to use the rear seat
beverage holders.
Beverage Holders NOTICE Spilled liquids can damage the upholstery,
carpeting, and electrical components in the interior.
Be careful when you are using the beverage holders.
Hot liquid can scald you.
Push