2011.5 Citroen C4 PICASSO Owner's Manual

15
FAMILIARISATION

Front seats


Head restraint


Backrest angle



Seat height adjustment


Lumbar support



Forwards-backwards adjustment


Armrest

Electric adjustments

Manual adjustments



68



Heated seat control
(lo-
cated on the inside of the
front seats)



67

1.
Adjustment of seat height, angle
and forwards-backwards position

2.
Adjustment of backrest angle and
lumbar support

3.
Driver: storing driving positions
The seats can also be adjusted on a
temporary basis:


- on opening one of the front doors,

- after switching on the ignition.

SITTING COMFORTABLY

16
FAMILIARISATION

Adjusting the seat belt height

To adjust the seat belt, squeeze the
control and slide it in the direction re-
quired.



131
From the driver’s seat position, the
controls located on the door are used
to operate the electric windows.



86


)
Slide the blind on the visor to the
desired position by pushing at A
.
The blinds are extended on the sun
visor rails.

)
Fold the visor downwards, to pre-
vent being dazzled.


Panoramic sunroof blind

Opening (positions 1
to 9
)
Closing (position 0
)
The blind has an anti-pinch system.



91

SITTING COMFORTABLY


Electric windows controls
Sliding sun visors




105

17
FAMILIARISATION

Recommended settings



- Heating/manual air conditioning:




- Digital air conditioning:
the fully automatic mode is recommended - press "AUTO"
.

Operate


For...





Cooling



or

Fully cold
to start,
then personal
settings

Maximum
to start,
then personal
settings

ON

ON when
starting,
then OFF


Heating




or

Fully hot
to start,
then personal
settings

Maximum
to start,
then personal
setting




ON when
starting,
then OFF


Demisting

Defrosting




Fully hot



OFF


VENTILATION

18
FAMILIARISATION

Seat belts not fastened/
unfastened warning lamp
This warning lamp informs you
if the driver’s or front passen-
ger’s seat belt is not fastened
(depending on model), and if
the front passenger’s (depend-
ing on model) or the second-row
passengers’ seat belts are unfastened.
The illuminated positions represent
those whose seat belts are not fastened/
unfastened.
Once the function has been activated,
when starting the engine, the system
automatically locks the doors once you
reach approximately 6 mph (10 km/h).
This function can be deactivated by
pressing button A
for more than two
seconds.

Tyre under-inflation detection

This function warns you if a tyre is de-
fl ated or punctured.
This system does not absolve the driver
of the need to regularly check the tyre
pressures.
The service warning lamp comes
on, and a vehicle outline is dis-
played, accompanied by a mes-
sage and an audible signal.
Under-infl ation warning
The STOP
warning lamp comes
on, and a vehicle outline is dis-
played, accompanied by a mes-
sage and an audible signal.
Puncture


41




127




89

MONITORING


Automatic central locking
Instrument panel


with multifunction screen A or C

with the MyWay or NaviDrive
multifunction screen


1.
Instrument panel.

2.
Multifunction screen.

3.
Control buttons.

4.
Warning lamps display zone.



31




32



Manual central locking

You can use electrical central locking or
unlocking by pressing on button A
.
If one of the doors is open or is not
closed properly, central locking will not
work.

19
FAMILIARISATION

Deactivation of the front
passenger’s airbag


Child lock

The 3 second-row seats of your vehicle
are fi tted with regulation ISOFIX mount-
ing points, with 3 rings for each seat po-
sition A B C.
This fi xing system is designed for chil-
dren weighing up to 18 kg.
Electric control



135




125



122



Front airbags


Manual control

PASSENGER SAFETY



1.
Insert the key in lock A
.

2.
Select the "OFF"
position.

3.
Remove the key. The rear doors are locked by operating
the lever using the key (aperture at an
angle).

Pressing the button prohibits operation
of the electric windows from the rear
of the vehicle and opening of the rear
doors from inside.

ISOFIX mounting system

20
FAMILIARISATION
Take care to attach the third-row pas-
senger seat belts to the rings provided
for this purpose.

Do not attach the belts to the load
anchorage points marked with a red
cross (see illustration above).

Stowing the tongue of the third-row
seat belt




133


Using the third-row passenger seat
belts (CITROËN Grand C4 Picasso)
PASSENGER SAFETY



)
Insert tongue C
into the buckle on
the right, then insert the second
tongue D
into the buckle on the left.



132



Seat belts


Second row centre seat belt

21
FAMILIARISATION

SECOND ROW SEATS

The 3 second-row seats are independ-
ent of each other and are all the same
width. They can all be adjusted to the
"comfort" position.

Placing a seat in the "comfort"
position

Returning the seat to its original position




70




Forwards-backwards adjustment

Lift up control A
, located at the front of
the seat, and adjust the seat into the
desired position.

INTERIOR

"Comfort" position



)
Pull on strap B.

The backrest reclines and the seat base
pivots slightly.


)
Pull on strap B
and guide the seat
forwards.

22
FAMILIARISATION
INTERIOR

Folding the seats


From the boot - whilst loading,
for example (CITROËN Grand
C4 Picasso)

SECOND ROW SEATS


From outside


)
Pull fi rmly upwards on strap C
, as
indicated by the red arrow, to unlock
the seat ; keep pulling until the seat
is fully folded.



)
Slide latch A
of the panel down-
wards, to unlock it.

)
Return the panel to the upright posi-
tion, then slide latch A
upwards to
lock it.
Before deploying the rigid panels, check
that the second row seats are in their
fully rear position.



72

Having fi rstly folded the third-row
seats.


)
Pull on strap D
to unlock the re-
quired seat.




Repositioning the seats

Return the rigid panels of the second-
row seats to their initial (upright) position
and lock them in position (CITROËN
Grand C4 Picasso).
Raise the backrest and push it back-
wards until it locks in position.


Rigid panel (CITROËN Grand
C4 Picasso)
A rigid panel is attached to each second-
row seat backrest.

Unlocking/Locking the rigid panel