2011.5 Citroen C4 display

286
02 STEERING MOUNTED CONTROLS

SPEAK
Press this button to activate voice reco
gnition (" Listening
" is displayed).
Durin
g voice recognition, press this button briefl y to pause voice recognition.
Make a lon
g press on this button to end voice recognition.
Press this button briefl
y to activate voice recognition, even during a call.

Increase / reduce audio volume.

START CALL
Press this button to answer an incomin
g call.
If th
ere is a 2nd
incoming call, press to put
the 1 stcall on hold and speak to the 2tndcaller.
In this case, press brie
fl y to switch from one caller to the other.
To start a three-way conversation, press
SPEAK to change to voice recognitionmode and say " Incorporate the call
".
END
CALL
Press this button to re
ject an incoming call.
During a conversation, press this button to end a call.
Search for a higher / lower radio frequency.
Next /
previous CD track.
CD fast forwards / backwards.

Lon
g press: audio system on / off.

Short press: selection of the source in thefollowing order: FM1 / FM2 / FM3 / MW /
LW / CD.

293
04
1
RADIO

The "Radio Data System" (RDS) function on the FM waveband permits:


- access to the displa
y of information, such as the name of the station, ...

- listenin
g to the same station while travelling through different regions,

- temporar
y tuning to traffi c information announcements.
Most FM stations use RD
S. These stations transmit non-audible
data in addition to their programmes.
The data transmitted in this wa
y allows you access to various
functions, mainly displaying of the name of the station, automatic
retuning to alternative frequencies or temporary retuning to traffi c
information announcements.
RD
S allows you to continue listening to the same station by meansof alternative frequencies that carry the same station. However,
in certain conditions, RDS alternative frequencies may not beprovided throughout the country. Radio stations do not cover thewhole country, which explains the loss of reception of the station
during a journey. "AF" ALTERNATIVE FREQUENCIES
Your radio automaticall
y checks and selects the best frequency for
the radio station to which it is tuned (if the station broadcasts onseveral transmitters or frequencies).
The frequenc
y of a radio station covers approximately 30 miles (50 km). The change from one frequency to another explains the
temporary loss of reception during a journey.
If the station to which
you are listening does not have severalfrequencies in the region in which you are currently located, you can
deactivate alternative frequencies.
Some stations are or
ganised in a network.
In different re
gions, they broadcast different or shared programmes
depending on the time of day.
Y
ou can follow:
- a regional station only,
- the entire network, with the possibilit
y that you will be listening
to a different programme.
REG REGIONAL MODE

On long distance journeys, when the stored station becomes weak,
the radio searches fi rst for another frequency for the same station (AF). Then, if this fails, it searches for a frequency broadcasting the regional programme (REG). If this also fails, the radio returns to thestored station.
The "AF", "REG" and "TP" functions
can be deactivated or activated via the"TUNE" button functions setting mode.



















RDS

294
04
1
RADIO

"TP" TRAFFIC INFORMATION

The "Traffi c Pro
gramme" (TP) function permits automatic
and temporary switching to an FM station broadcasting traffi c
information.

The radio station or the source that you are listening to at this pointis paused.

Once the traffi c information has ended, the system switches back to
the radio station or the source that you were listening to initially.

Press the "TP" button.
"TP" appears in the screen. I
f thestation is compatible, "RDS" also appears.

If the radio detects traffi c information, "TRAF INF" a
ppears on the
display, followed by the frequency of the broadcasting station, thenits name.
The volume is di
fferent from that of the previous source.
Following the broadcasting o
f the traffi c information, the volume
returns to that of the source prior to the interruption.

When "TP" appears in the screen, the radio stops onl
y at RDSstations broadcasting traffi c information.
"ALERT" EMERGENCY BROADCA
STS


An emergency broadcast automatically and temporarily interrupts
the FM station or the source that you are listening to.
The messa
ge "ALERT" appears in the screen and the volume is
different from that of the previous source.
Followin
g the emergency broadcast, the message disappears and
the volume returns to that of the source prior to the interruption.

"PTY" THEMED TYPE OF PROGRAMME

Some stations offer the option of listening to a themed type of
programme as a priority, selected from the list available below:
NEW
S, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE,SCIENCE, VARIED, POP M, ROCK M, EASY M, LIGHT M, CLASSICS, OTHER M, WEATHER, FINANCE, CHILDREN,SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ,COUNTRY, NATION M, OLDIES, FOLK M, DOCUMENT.

296
04
11
RADIO

CHANGING THE DISPLAY LANGUAGE OF THE "PTY" PROGRAMME
Press the "TUNE" button
for more than
two seconds to access the functions setting mode.
Then,
press this button several times
in succession; the functions setting
mode changes in the following order:
AF
/ CT / REG / TP-S / PTY (languages) / SCV / PHONE / OFF.
Turn the "TUNE" dial to the le
ft or
to the right to select the language(ENGLISH, FRANCAIS, DEUTSCH,SVENSK, ESPAGNOL, ITALIANO). FUNCTIONS SETTING MODE

This
permits activation or deactivationof the functions below.
Press the "T
UNE" button for more than
two seconds to access the functionssetting mode.
Then, press this button several times
in succession; the
functions setting
mode changes in the following order:
AF
/ CT / REG / TO-S / PTY (languages) / SCV / PHONE / OFF.

Turn the "TUNE" dial respectivelyto the left to deactivate the function("OFF") or to the right to activate it("ON").

The "PH
ONE" is not operational at present.
The
functions setting mode is deactivated after approximately10 seconds without any action.

299
1
2
1
05

CD-TEXT DISPLAY
Press the "DISP" button several times
in succession; the CD-Text informationappears in the following order:
DI
SC NAME / TRACK NAME /
NORMAL DISPLAY MODE.
The CD pla
yer and the CD changer are compatible with the display
of CD-Text information.

In the case o
f compact discs containing both CD-DA and MP3 fi les, play automatically begins with the CD-DA fi les.
To switch play between the two types o
f fi le, press the "CD" buttonfor more than two seconds until an audible signal is heard.
While usin
g these compact discs, the "Repeat", Random play" and
"Playing of the beginning of the tracks" functions are only applied to
fi les of the same format. I
f the information exceeds
12 characters, press the "PAGE"button to see the rest.
In th
e absence of CD-Text information
to be displayed, "NOTITLE" appears on the screen.








MP3 / ID3 TAG CD


SELECTING AN MP3 FOLDER

Turn the "F
OLDER" dial respectively to
the right to select a folder in ascendingorder or to the left to select a folder in
descending order.
The
CD player and the CD changer are compatible with the playing of MP3 fi les.
These must be recorded in I
SO9660 Level 1 / Level 2, Joliet or Romeo format on CD ROMs, CD-Rs or CD-RWs. The CDs can contain a maximum of 255 fi les and 100 folders on 16 levels.
The ID3 version 1 Ta
g can be displayed while playing MP3 fi les.
MUSIC MEDIA PLAYERS

300
05
1
1
1
1
1
MUSIC MEDIA PLAYERS
REPEATING THE TRACKS IN A FOLDER

Pr
ess the "RPT" button for more than
two seconds to repeat the playing of
the tracks contained in the currentfolder. "D-RPT" appears in the screen.
To exit this mode, press this button
a
gain.

Pr
ess the "RDM" button to start random playing of the tracks in the current folder. "RDM" appears in the screen.

To exit this mode, press this button
again. PLAYING THE BEGINNING OF EACH TRACK
MP3 / ID3 TAG DISPLAY

Press the "DI
SP" button several times
in succession; the MP3 information
appears in the followin
g order:
F
OLDER NAME / TRACK NAME / NORMAL DISPLAY MODE.
Press the "
SCAN" button to start playing the fi rst ten seconds of each
track in all of the folders. "SCAN"
appears in the screen and thecorresponding track number fl ashes.
To exit this mode, press this button
a
gain.
RANDOM PLAYING OF A FOLDER
RANDOM PLAYING OF A DI
SC

Pr
ess the "RDM" button for more than
two seconds to start random playing of
the tracks in all of the folders. "D-RDM"
appears in the screen.
To exit this mode,
press this button
again. When pla
y begins, "READING" appears in the screen then
disappears to make way for the folder number, the track number,
the playing time and "MP3".

301
05
3
1
1

Press the "DISP" button for more than
two seconds to activate the ID3 Tag
information. "TAG" appears in thescreen.
Press the "DI
SP" button several times
in succession; the Tag ID3 information
appears in the following order:

ALBUM NAME / TRACK NAME / ARTIST NAME / NORMAL DISPLAY MODE.
To deactivate this information,
press
the "DISP" button again for more than
two seconds.

If th
e information exceeds
12 characters, press the "PAGE"
button to see the rest.
In the absence o
f MP3 or ID3 Taginformation to be displayed,
"NOTITLE" appears in the screen.

On CD-R/RWs, the quality of the playing sound depends on the encoding software, the burning device and the burning speed used.
Dependin
g on the fl ow chart of the MP3 folders and fi les on the disc, play may not begin immediately.
















CD CHANGER

SELECTING CHANGER MODE

After inserting at least one disc, printedface upwards, the changer starts
automatically.
I
f the changer already contains a disc, press the "CD" button.
"CD", the disc and track numbers and
the pla
ying time appear in the screen.
MUSIC MEDIA PLAYERS

See also "CD-Text display" and "MP3 / ID3 Tag CD".
LOADING A DISC

The CD chan
ger can hold up to 6 CDs.
Press the "L
OAD" button briefl y. "WAIT" appears on the display.

When the changer is ready, the
indicator lamp on the "LOAD" button comes on and "LOAD DISC N° (1-6)"
appears in the screen.
If several slots are empt
y, select oneusing one of the "DISC" buttons.

Insert circular compact discs only.
8 cm compact discs cannot be pla
yed by the changer.

302
05
1
1
1
1
MUSIC MEDIA PLAYERS
LOADING ALL OF THE DISCS

Pr
ess the "LOAD" button for more than
two seconds.
The chan
ger selects an empty slot number from the lowest to the highest
and switches to waiting for loading mode.
"L
OAD DISC N° (1-6)" appears on
the display; insert the disc in the
corresponding slot.
The chan
ger automatically selects the next empty slot number and returns to
waiting for loading mode.

Repeat these steps until loading is complete. Play begins with the last disc inserted.

Press this button brie
fl y to remove the current disc from the changer. EJECTING ALL OF THE DISCS

SELECTING A DISC

Press one of the "DI
SC" buttons several times in succession until you reach the disc required. The symbol
of the disc selected appears in the
screen.
Pr
ess this button for more than twoseconds. The current disc is ejected.

Once this disc has been removed, the next disc is ejected automatically in
its turn.
Repeat these steps until unloadin
g iscomplete.
EJECTING A DISC
Once ejected, if the compact disc is not removed within fi fteen seconds it is re-loaded into the changer.