2010 YAMAHA RHINO 700 oil dipstick

3-1
EVU00080
1 -DESCRIPTION
1. Headlights
2. Radiator cap
3. Coolant reservoir
4. Brake fluid reservoir
5. Driver seat
6. Driver seat belt
7. Rear passenger handhold
8. Rear seat
9. Rear passenger seat belt
10. Cargo bed
11. Tail/brake light
12. Spark arrester
13. Rear shock absorber assembly
14. Rear door1324 56 7890A
HG FED C B
15. Spark plug
16. V-belt case
17. Front door
18. Front shock absorber assembly
19. Front passenger seat belt
20. Front passenger seat
21. Front passenger handhold
22. Battery
23. Fuses
24. Air filter element
25. Engine oil dipstick
26. Fuel tank cap
27. Oil filter cartridge
97IJKLMN
DQP OG
FEE.book Page 1 Monday, January 19, 2009 5:30 PM

8-27 1. Engine oil dipstick
1. Jauge d’huile moteur
1. Varilla de medición del aceite del motor
1
1. Engine oil dipstick 2. Maximum level mark
3. Minimum level mark
1. Jauge d’huile moteur 2. Repère de niveau maximum
3. Repère de niveau minimum
1. Varilla de medición del aceite del motor
2. Marca de nivel máximo 3. Marca de nivel mínimo
2
3
1
4. Remove the engine oil dipstick, and then
wipe it off with a clean rag.
5. Insert the dipstick completely into the oil filler
hole with the arrow mark on the dipstick knob
pointing upward as shown, and then remove
it again to check the oil level. The engine oil
should be between the minimum and maxi-
mum level marks.
6. If the engine oil is at or below the minimum
level mark, add sufficient oil of the recom-
mended type to raise it to the correct level.
7. Insert the dipstick completely into the oil filler
hole with the arrow mark on the dipstick knob
pointing upward.
EE.book Page 27 Monday, January 19, 2009 5:30 PM

8-31 1. Engine oil drain bolt
1. Vis de vidange d’huile moteur
1. Tornillo de vaciado del aceite del motor
1
1. Oil filter cartridge 2. Oil filter wrench
1. Cartouche du filtre à huile 2. Clé pour filtre à huile
1. Cartucho del filtro de aceite 2. Llave del filtro de aceite
21
5. Place an oil pan under the engine to collect
the used oil, and then remove the dipstick.
6. Remove the engine oil drain bolt to drain the
oil from the crankcase.
Skip steps 7–9 if the oil filter cartridge is not being
replaced.
7. Remove the oil filter cartridge with an oil filter
wrench. An oil filter wrench is available from a
Yamaha dealer. Make sure that the O-ring is
removed together with the oil filter cartridge.
If the O-ring remains attached to the crank-
case, oil leakage may occur.
EE.book Page 31 Monday, January 19, 2009 5:30 PM

8-35
11. Refill with the specified amount of recom-
mended engine oil, and then insert the dip-
stick completely into the oil filler hole with the
arrow mark on the dipstick knob pointing up-
ward. NOTICE: Be sure to wipe off spilled
oil on any parts after the engine and ex-
haust system have cooled down.
Recommended engine oil:
See page 10-3.
Oil quantity:
Without oil filter cartridge replacement:
2.00 L (2.11 US qt, 1.76 Imp.qt)
With oil filter cartridge replacement:
2.10 L (2.22 US qt, 1.85 Imp.qt)
EE.book Page 35 Monday, January 19, 2009 5:30 PM