Radio
4rotary/push knob . If the engine is switch ed off, the unit (protection of the vehicle
battery before discharging) switches of f automatically after approx. one hour.
If you have switched off the radio by withdrawing the ignition key, the radio
switches on again once the ignition is on.Audio settingsSetting the bass
– Press the button , BASS appears in the display.
– Set the desired value by turning the button .
Setting treble
– Press the button , TRE appears in the display.
– Set the desired value by turning the button .By pressing again the button or 5 seconds after the setting, the set values are
stored and the radio returns to the normal mode.Adjusting volume ratioBalance
– Press the button , BAL appears in the display.
– You can set with the button the desired value of the volume ratio between the left and right side.
Fa d er
– Press the button once again, FA D appears in the display.
– You can set with the button the desired value of the volume ratio between the front and the rear.
By pressing again the button or 5 seconds after the setting, the set values are
stored and the radio returns to the normal mode.Setting the special functions– Press the button for some considerable time, in order to activate the menu Setup.
– Once again press the button or the rocker switch or , in order to select the individual functions of the menu.
– Confirm the changed setting with the button .
– You can store the desired value by briefly pressing the button or the rocker switch .
– You can leave the menu Set-up without storing the values by pressing the button for a long time.GALA
Your radio increases automatically its volume with the increasing vehicle speed. A
higher setting value results in a stronger volume increase.
ON VOL
Your radio stores the last volume set before switching off. If the value is higher, the
volume is reduced to the value of the parameter ON VOL after switching on the
radio again.
LED
For switching the Warn LED on or off.
BEEP
Switching on or off the tone signal when storing the radio stations.
AUTO REG / REG OFF
Certain programs of the broadcasting companies are divided into regional
programs at specific times. That is why in individual regions the regional programs
of a station can broadcast different contents.
A1
AUD
A1
AUD
A1
AUD
GEO
A1
GEO
A1
GEO
TP
TP
A1
TP
TP
s1tk.book Page 4 Thursday, March 20, 2008 1:56 PM
Radio
6
Store station
– After selecting the radio station, hold one of the station keys , on
which it should be stored until it briefly switches to mute and a brief
signal sounds.
Automatic station finding with storing the radio stations
– Press the button . An automatic station finding is started during which the 6 stations with the strongest signal in the memory level
FM2, TP or AM2 are stored. STORE is displayed on the display.When storing the radio stations on the st ation keys is finished, you can call up
the desired radio station by pressing a station key .
Note
The stored radio stations are updated and stored once again by repetitively
pressing the button .Radio textCertain radio stations transmit addition al text information - designated as
radio text.
Note•
The text information must not be available to all radio stations.
•
Depending upon the quality of the received signal, the radio needs a specific
time, in order to correctly read all the illustrated characters.
RDS functionsRDS (“ Radio Data System”) serves to transmit program identification and additional
services therefore also enabling automatic tracking of stations. In the event of sufficiently satisfactory reception the suitable RDS radio stations will
display the station name instead of the station frequency.
If a radio station sends additional inform
ation via the RDS function while a station
is being stored, it can occur that the name of the radio station is later displayed
incorrectly in the memory list.
Tr a f f i c r e p o r t sActivating and deactivating the traffic reports
Press the button , TP appears in the display. If a set radio station does not
transmit a traffic report, the radio searches for a station which transmits the traffic
report. TP SEEK is displayed on the display.
If no radio station which transmits the traffic reports is found, NO TP is shown on
the display.
An incoming traffic report automatically inte rrupts the CD play function or listening
to a radio station, which at that moment is not transmitting a traffic report. INFO
PRGNAME is displayed on the display. At th e end of the traffic report, the radio
automatically returns to the original play function.
If you wish to deactivate the traffic information, press once again the button , TP
goes out on the display.Traffic information memory Automatic recording of traffic reports
If the traffic information function is switched on, a traffic information station
is received and the incoming traffic reports will be recorded as long as the ignition
is switched on. This way you are informed at any time of the current traffic situation,
even if you have your radio switched off for a lengthy period while driving.
If the vehicle is not in use (ignition off) while a traffic information station is received
and the traffic information function is sw itched on, incoming traffic reports from
this station are recorded for two hours.
When switching the ignition off the current traffic information station is displayed
for about five seconds, from which the ne xt two hours of traffic reports will be
A7
AS
A7A7
AS
TP
TP
AIM
s1tk.book Page 6 Thursday, March 20, 2008 1:56 PM
