Page 9 of 331
12
SITTING COMFORTABLY
Front seats
Head restraint height and angle
Lumbar 64
Steering wheel adjustment
1. Unlocking the control.
2. Adjustment of height and reach.
3. Locking the control.
As a safety precaution, these operations
must only be carried out when stationary.
72
Centre console
This has a large storage area (with re-
cesses for 2 bottles, ...) for the front
passengers and, according to version,
a multimedia system for the rear pas-
sengers. 101,
104
Page 15 of 331
18
ARRANGING YOUR SEATS
Rigid panel
Putting the seats back in place
Raise the seat back and push it
rearwards until it locks.
From the boot
Pull the strap B to release the seat
and push the seat back forwards
gently.
Folding the seats in the 2nd row
Pull the strap A u p w a r d s fi r m l y t o r e -
lease the seat and continue to pull
until the seat is fully folded.
Access to the 3rd row seats
Close the aircraft style tables on the
2nd row seats if they are open.
Hold the control D up, the seat is
released and the seat base rises to
the seat back.
Push the seat back forwards, holding the control D forwards.
68
67
68
7 SEAT VERSION
After folding the seats, slide the
catch C .
Page 16 of 331
19
ARRANGING YOUR SEATS (7 SEAT VERSION)
69,
108
Pull the strap E and guide the seat
until the assembly locks.
Fold the concertina boards forwards.
Lower the head restraints and place
the concertina board in the vertical
position behind the seat.
While pulling the strap F , push the
seat back forwards gently.
Remove the load space screen from
its storage compartment and position
it behind the 2nd row seats.
Place the rigid panels of the 2nd row
seats upright and lock them then fold
the concertina boards rearwards.
Remove the load space cover and
store it in its housing.
Changing from 5 to 7 seats
69,
108
Page 63 of 331
62
FRONT SEATS
Seat consisting of a seat cushion, a seat
back and a head restraint which can all
be adjusted to adapt your position for
ease of driving and comfort.
F o r w a r d s - b a c k w a r d s a d j u s t m e n t
Raise the control and slide the seat
forwards or backwards. D r i v e r ' s o r p a s s e n g e r ' s s e a t h e i g h t
a d j u s t m e n t
Pull the control upwards to raise
or push it downwards to lower, as
many times as necessary, to obtain
the position required. S e a t b a c k a n g l e a d j u s t m e n t
Push the control rearwards.
M a n u a l a d j u s t m e n t s
Page 65 of 331
64
Heated seats control
With the engine running, the front seats
can be heated separately.
Use the adjustment dial, placed on
the side of each front seat, to switch
on and select the level of heating re-
quired:
0: Off.
1
: Low.
2
: Medium.
3
: High.
H e a d r e s t r a i n t h e i g h t a n d a n g l e
a d j u s t m e n t
To raise the head restraint, pull it for-
wards and upwards at the same time.
To remove the head restraint, press the lug A and pull the head restraint upwards.
To put the head restraint back in place,
engage the head restraint stems in the
openings keeping them in line with the
seat back.
To lower the head restraint, press the lug A and the head restraint at the
same time.
To adjust the angle of the head restraint,
tilt its lower part forwards or rearwards.
T h e h e a d r e s t r a i n t i s fi t t e d w i t h
a frame with notches which
prevents it from lowering; this
is a safety device in case of impact.
T h e a d j u s t m e n t i s c o r r e c t w h e n t h e
u p p e r e d g e o f t h e h e a d r e s t r a i n t i s
l e v e l w i t h t h e t o p o f t h e h e a d .
Never drive with the head restraints
removed; they must be in place and
adjusted correctly.
L u m b a r a d j u s t m e n t
Turn the dial to obtain the correct
lumbar position. A d d i t i o n a l a d j u s t m e n t s
Page 66 of 331
65
T a b l e p o s i t i o n , f r o n t p a s s e n g e r s e a t
This position, associated with that of the
rear seats, allows you to transport long
objects inside the vehicle.
The maximum weight on the seat is
30 kg.
F o l d i n g t h e s e a t b a c k
Raise the armrest and fold up the
" a i r c r a f t " s t y l e t a b l e , fi x e d o n t h e
back of the seat.
Check that no object, either on or
underneath the seat, could hinder
its movement.
To make the operation easier, place
the head restraint in the low position
o r r e m o v e i t ( i f t h e s e a t i s i n t h e f u l l y
f o r w a r d p o s i t i o n ) .
Lift the control, located behind the
seat, then guide the seat back for-
wards. R e t u r n i n g t h e s e a t t o t h e n o r m a l
p o s i t i o n
Lift the control, located behind the
seat, then guide the seat back rear-
wards until it locks.
When the seat back is in this posi-
tion, only the 2 nd
row passenger
seat located behind the driver can be
used.
Page 67 of 331
66
REAR HEAD RESTRAINTS
The rear head restraints can be removed
and have two positions:
- high, position for use,
- low, storage position.
To raise a head restraint, pull it up-
wards.
To lower it, press the lug then the head
restraint.
To remove it, place it in the high position,
push the lug and pull it upwards.
T o r e fi t i t , e n g a g e t h e h e a d r e s t r a i n t
rods in the holes taking care to remain
in line with the seat back.
2 ND ROW SEATS
F o r w a r d s - b a c k w a r d s a d j u s t m e n t
Lift the control A , located at the front of
the seat, then adjust the seat to the po-
sition desired.
" C o m f o r t " p o s i t i o n
The three 2 nd row seats are independent
of each other and all the same width. They
all have a "comfort" position.
P l a c i n g a s e a t i n t h e " c o m f o r t "
p o s i t i o n
Pull on the control B and guide the
seat rearwards.
The backrest reclines and the seat base
moves forward slightly.
R e t u r n i n g t h e s e a t t o t h e i n i t i a l
p o s i t i o n
Pull on the control B and allow the
seat to come forwards.
Always supervise any move-
ments of seats by children.
Never drive with the head re-
straints removed, they must
be in place and correctly ad-
justed.
Page 68 of 331
66
REAR HEAD RESTRAINTS
The rear head restraints can be removed
and have two positions:
- high, position for use,
- low, storage position.
To raise a head restraint, pull it up-
wards.
To lower it, press the lug then the head
restraint.
To remove it, place it in the high position,
push the lug and pull it upwards.
T o r e fi t i t , e n g a g e t h e h e a d r e s t r a i n t
rods in the holes taking care to remain
in line with the seat back.
2 ND ROW SEATS
F o r w a r d s - b a c k w a r d s a d j u s t m e n t
Lift the control A , located at the front of
the seat, then adjust the seat to the po-
sition desired.
" C o m f o r t " p o s i t i o n
The three 2 nd row seats are independent
of each other and all the same width. They
all have a "comfort" position.
P l a c i n g a s e a t i n t h e " c o m f o r t "
p o s i t i o n
Pull on the control B and guide the
seat rearwards.
The backrest reclines and the seat base
moves forward slightly.
R e t u r n i n g t h e s e a t t o t h e i n i t i a l
p o s i t i o n
Pull on the control B and allow the
seat to come forwards.
Always supervise any move-
ments of seats by children.
Never drive with the head re-
straints removed, they must
be in place and correctly ad-
justed.
