2010 Peugeot 407 Dag light
[x] Cancel search: lightPage 32 of 249
2MULTIFUNCTION SCREENS
32
D i s p l a y
This menu allows you to set the bright-
ness of the display, the display colour
scheme and the colour of the map
(day/night and auto mode).
V e h i c l e
This menu permits the activation or
deactivation of certain driving and
comfort systems:
- air conditioning (A/C),
- vehicle information,
- access to the vehicle,
- driving assistance,
- l i g h t i n g c o n fi g u r a t i o n ,
- comfort lighting.
U n i t s
This menu permits selection of the
units: temperature (°C or °F) and fuel
c o n s u m p t i o n ( k m / l , l / 1 0 0 , m i l e s a n d
mpg).
S y s t e m
This menu permits restoring of the fac-
t o r y c o n fi g u r a t i o n , d i s p l a y o f t h e s o f t -
ware version and activation of scrolling
text. F o r s a f e t y r e a s o n s , c o n fi g u -
ration of the multifunction
screen by the driver must only
be done when stationary. COLOUR SCREEN (WITH PEUGEOT CONNECT NAVIGATION) "SETUP" menu
Press the SETUP button to gain access
to the "SETUP" menu. This provides
access to the following functions:
- System language,
- Date & Time,
- Display,
- Vehicle,
- Units,
- System.
S y s t e m l a n g u a g e
This menu allows you to select
the language used by the display:
German, English, Spanish, French,
Italian, Dutch, Polish, Portuguese.
D a t e & T i m e
This menu allows you to set the date
and time, the format of the date and
the format of the time (refer to the
"Audio and Telematics" section).
This displays the following information:
- time,
- date,
- ambient temperature (the value dis-
p l a y e d fl a s h e s i f t h e r e i s a r i s k o f i c e ) ,
- c h e c k o f o p e n i n g s ,
- vehicle function status messages, displayed temporarily,
- warning messages,
- audio functions,
- trip computer information,
- air conditioning settings,
- satellite navigation system information.
Page 33 of 249
2MULTIFUNCTION SCREENS
33
HIGH DEFINITION COLOUR SCREEN (WITH PEUGEOT CONNECT MEDIA)
This displays the following information:
- time,
- date,
- ambient temperature (the value dis- p l a y e d fl a s h e s i f t h e r e i s a r i s k o f
ice),
- c h e c k o f o p e n i n g s ,
- vehicle function status messages, displayed temporarily,
- warning messages,
- audio functions,
- trip computer information,
- air conditioning settings,
- satellite navigation system information.
Main menu D i s p l a y c o n fi g u r a t i o n
Press the "MENU" button to gain ac-
cess to the main menu and select one
of the following functions: Navigation-
G u i d a n c e , M a p , T r a f fi c I n f o r m a t i o n ,
A u d i o F u n c t i o n s , T e l e m a t i c s , C o n fi g u -
ration, Video, Vehicle Diagnostics and
Air Conditioning. - Choose colour,
- Adjust brightness,
- Adjust date and time,
- Choose units.
D e fi n e t h e v e h i c l e p a r a m e t e r s
Permits the activation or deactivation
of certain driving and comfort ele-
ments:
- p e r m a n e n t l o c k i n g o f t h e b o o t o n
the 407 Saloon,
- automatic illumination of headlamps,
- automatic "guide-me-home" lighting,
- automatic rear wiping on engaging reverse gear on the 407SW.
The " C o n fi g u r a t i o n " menu provides
access to the following functions:
- D i s p l a y c o n fi g u r a t i o n ,
- Sound,
- Choice of language,
- D e fi n e t h e v e h i c l e p a r a m e t e r s .
You can connect video equipment
(camcorder, digital camera, ...) to the
t h r e e v i d e o s o c k e t s , l o c a t e d i n t h e
glove box.
Video display is only possible when
stationary.
Select the Video menu from the gen-
eral menu:
- "Activate video mode" to activate/deactivate the video,
- "Video parameters" to set the dis- play format, the brightness, the con-
trast and the colours.
P r e s s t h e " E S C " o r " D A R K " b u t t o n t o
exit from video mode.
P r e s s t h e " S O U R C E " b u t t o n s e v e r a l
times in succession to select an audio
source other than that of the video. VIDEO MENU (WITH PEUGEOT CONNECT MEDIA)
Page 44 of 249
3COMFORT
44
PROGRAMMABLE HEATING Programming remote control
T h e h e a t i n g s y s t e m p r o g r a m m i n g r e -
mote control consists of the following
b u t t o n s a n d d i s p l a y s :
1. S c r o l l i n g f u n c t i o n s m e n u b u t t o n s .
2. Function indicator lights: clock,
t e m p e r a t u r e , o p e r a t i n g t i m e , p r o -
g r a m m e d t i m e , h e a t e r o p e r a t i o n ,
h e a t i n g m a n a g e m e n t s y m b o l s .
3. D i g i t a l d i s p l a y s : t i m e , t e m p e r a t u r e ,
d u r a t i o n o f o p e r a t i o n , p r o g r a m m e d
t i m e o r l e v e l o f h e a t i n g .
4. O f f b u t t o n .
5. O n b u t t o n . Displaying the functions
If a malfunction of the programma-
ble heating system occurs, contact
a PEUGEOT dealer.
T h e p r o g r a m m a b l e h e a t i n g o p e r a t e s
i n d e p e n d e n t l y o f t h e e n g i n e .
W h e n t h e e n g i n e i s o f f , i t p r e - h e a t s
t h e c o o l a n t c i r c u i t i n o r d e r t o b e n e fi t
f r o m a n o p t i m u m e n g i n e o p e r a t i n g
t e m p e r a t u r e f r o m t h e t i m e t h e e n g i n e
i s s w i t c h e d o n .
T h e p r o g r a m m a b l e h e a t i n g s y s t e m
is switched on using the long range
r e m o t e c o n t r o l . A c t i v a t i o n c a n b e i m -
m e d i a t e o r d e f e r r e d b y m e a n s o f a
p r o g r a m m i n g f u n c t i o n .
Displays on the remote control
screen
Press the buttons
1 in succession to
d i s p l a y t h e f u n c t i o n s .
T h e fi r s t p r e s s o f t h e l e f t - h a n d o r r i g h t -
h a n d b u t t o n d i s p l a y s t h e t i m e .
N e x t , t h e l e f t - h a n d b u t t o n p e r m i t s a c -
c e s s t o t h e p r o g r a m m i n g t i m e t h e n t o
t h e l e v e l o f h e a t i n g ( C 1 t o C 5 ) .
T h e r i g h t - h a n d b u t t o n p e r m i t s a c c e s s
t o t h e p a s s e n g e r c o m p a r t m e n t t e m -
p e r a t u r e t h e n t o t h e d u r a t i o n o f o p e r a -
tion of the heater if it is to be switched
o n i m m e d i a t e l y .
T h e p a s s e n g e r c o m p a r t m e n t
t e m p e r a t u r e i n f o r m a t i o n i s
o n l y a v a i l a b l e w h e n t h e e n -
g i n e i s o f f .
Page 73 of 249
4ACCESS
66
Reactivation of the interior
volumetric monitoring
Press the unlocking button on the
remote control to deactivate the
exterior perimeter monitoring.
Press the locking button on the
remote control to activate all the
monitoring functions.
The indicator lamp on the button again
fl a s h e s o n c e p e r s e c o n d . Triggering of the alarm
This is indicated by sounding of the
s i r e n a n d fl a s h i n g o f t h e d i r e c t i o n i n d i -
cators for thirty seconds.
The monitoring functions remain ac-
tive until the alarm has been triggered
eleven times in succession.
When the vehicle is unlocked using
t h e r e m o t e c o n t r o l , r a p i d fl a s h i n g o f
the indicator lamp on the button in-
forms you that the alarm was triggered
during your absence. When the igni-
t i o n i s s w i t c h e d o n , t h i s fl a s h i n g s t o p s
immediately.
Failure of the remote control
To deactivate the monitoring functions:
Unlock the vehicle using the key in
the driver's door lock.
Open the door; the alarm is trig-
gered.
Switch on the ignition; the alarm
stops. The indicator lamp on the
button switches off. Locking the vehicle without
activating the alarm
Lock or deadlock the vehicle using
the key in the driver's door lock.
Malfunction
W h e n t h e i g n i t i o n i s s w i t c h e d o n , fi x e d
lighting of the indicator lamp on the
button indicates a malfunction of the
system.
Have it checked by a PEUGEOT dealer.
* According to country.
Automatic activation *
2 minutes after the last door or the
boot is closed, the system is activated
automatically.
To avoid triggering the alarm on
e n t e r i n g t h e v e h i c l e , fi r s t p r e s s t h e
unlocking button on the remote
control.
Page 75 of 249
4ACCESS
68
BOOT (SALOON) TAILGATE AND REAR SCREEN (407SW) Partial opening of the rear screen
Opening the tailgate and rear
screen
The tailgate and rear screen cannot
be opened at the same time.
With the rear screen closed, to open
the tailgate , operate the handle A ,
then lift the tailgate.
With the tailgate closed, to open the
rear screen , operate the handle B ,
then lift the rear screen.
The boot lighting is controlled by open-
ing the tailgate or the rear screen.
If the permanent locking of the
boot is activated, opening is
only possible by pressing the
remote control button.
Notes: the tailgate and rear
screen lock automatically when
driving at 6 mph (10 km/h) and
unlock when one of the doors
is opened.
When the rear wiper is in a wiping
position, the rear screen cannot be
opened until the end of the cycle.
Close the rear screen using the wiper
arm or by pressing the centre of the
glass.
To open the boot, press the push button
and raise the tailgate.
The locking or unlocking of the tailgate
and rear screen is simultaneous with
that of the doors. With the tailgate closed, to partially
open the
rear screen , press and hold
the unlocking button C on the remote
control.
Page 76 of 249
4ACCESS
68
BOOT (SALOON) TAILGATE AND REAR SCREEN (407SW) Partial opening of the rear screen
Opening the tailgate and rear
screen
The tailgate and rear screen cannot
be opened at the same time.
With the rear screen closed, to open
the tailgate , operate the handle A ,
then lift the tailgate.
With the tailgate closed, to open the
rear screen , operate the handle B ,
then lift the rear screen.
The boot lighting is controlled by open-
ing the tailgate or the rear screen.
If the permanent locking of the
boot is activated, opening is
only possible by pressing the
remote control button.
Notes: the tailgate and rear
screen lock automatically when
driving at 6 mph (10 km/h) and
unlock when one of the doors
is opened.
When the rear wiper is in a wiping
position, the rear screen cannot be
opened until the end of the cycle.
Close the rear screen using the wiper
arm or by pressing the centre of the
glass.
To open the boot, press the push button
and raise the tailgate.
The locking or unlocking of the tailgate
and rear screen is simultaneous with
that of the doors. With the tailgate closed, to partially
open the
rear screen , press and hold
the unlocking button C on the remote
control.
Page 77 of 249
4ACCESS
69
"Rear screen open" warning
When the engine is running , if the
rear screen is not fully closed, you are
warned by a message on the multi-
function screen.
When the vehicle is moving (speed
greater than 6 mph (10 km/h)), if the
rear screen is not fully closed, you are
warned by an audible signal, a mes-
sage on the multifunction screen and
lighting of the service warning lamp. Tailgate release
This enables the tailgate to be un-
locked in the event of a central locking
fault.
- Fold back the rear seats to gain
access to the lock from inside the
boot.
- Insert a small screwdriver into hole A
of the lock to unlock the tailgate.
Page 79 of 249
4ACCESS
71
Safety anti-pinch
If the blind encounters an obstacle
during closing, it stops and partially
opens again.
You must reinitialise the safety anti-
p i n c h w i t h i n a m a x i m u m o f fi v e s e c -
onds after the blind has stopped:
- press part A of the control until the
blind is completely closed (closing
in stages of a few centimetres). PANORAMIC SUNROOF (407SW) In the event of contact du-
ring operation of the blind, you
must reverse its movement.
To do this, press the control
concerned.
When the driver operates the blind-
control, they must ensure that no one
is preventing the blind from closing
correctly.
The driver must ensure that the pas-
sengers use the blind correctly.
Pay attention to children during opera-
tion of the blind.
Notes :
Following reconnection of the battery,
in the event of a blind malfunction
while it is moving or immediately after
it has stopped, you must reinitialise
the safety anti-pinch:
- place the control in the fully open position (position "0"),
- wait until the blind is in the fully open position,
- press section A of the control for at
least three seconds.
In the event of unwanted opening of
the blind on closing, and immediately
after the blind has stopped:
- move the control to the fully closed position (9th setting to the left) then
press part A of the control straight
away,
- continue to press the control until the blind is fully closed.
The safety anti-pinch function is not
active during these operations.
Y o u r v e h i c l e i s fi t t e d w i t h a t i n t e d g l a s s
panoramic sunroof which increases
the light and visibility in the passen-
ger compartment. Its electric blind im-
proves temperature conditions.
The blind is controlled electrically by
a dial with nine opening positions.
To close: turn the dial to the left (nine
possible settings).
To open: return the dial to the initial
position "0" .