2010 NISSAN VERSA HATCHBACK Owners Manual

Page 129 of 338

NISSAN VERSA HATCHBACK 2010 1.G Owners Manual NOTE:● Doors lock with the door handle request
switch or rear hatch/trunk request switch
while a mechanical key is in the ignition
switch or the ignition switch is pushed in.
● Doors lock with the

Page 130 of 338

NISSAN VERSA HATCHBACK 2010 1.G Owners Manual ●The request switch is operational only
when the Intelligent Key has been de-
tected by the Intelligent Key system.
Lockout protection
To prevent the Intelligent Key from being acci-
dentally locked

Page 131 of 338

NISSAN VERSA HATCHBACK 2010 1.G Owners Manual If a door handle is pulled while unlocking the
doors, that door may not be unlocked. Returning
the door handle to its original position will unlock
the door. If the door does not unlock after return-

Page 132 of 338

NISSAN VERSA HATCHBACK 2010 1.G Owners Manual The remote keyless entry function will not func-
tion under the following conditions:● When the Intelligent Key is not within the
operational range.
● When the doors or the rear hatch/trunk are
op

Page 133 of 338

NISSAN VERSA HATCHBACK 2010 1.G Owners Manual Unlocking doors
1. Press thebutton on the Intelligent
Key.
2. The hazard warning lights flash once.
3. Press the
button again within 1
minute to unlock all doors and the rear
hatch/trunk. All doors an

Page 134 of 338

NISSAN VERSA HATCHBACK 2010 1.G Owners Manual The panic alarm stops when:● It has run for 25 seconds, or
● Any button is pressed on the Intelligent Key.
● Pushing the request switch on the driver or
passenger door with the Intelligent Key i

Page 135 of 338

NISSAN VERSA HATCHBACK 2010 1.G Owners Manual 1Intelligent Key lock warning light (M/T
models) or P position selecting warning
light (CVT or A/T models)
2Intelligent Key system warning light
WARNING LIGHTS AND AUDIBLE
REMINDERS
The Intelligent

Page 136 of 338

NISSAN VERSA HATCHBACK 2010 1.G Owners Manual When the Intelligent Key lock warning light
(
) (M/T models) in the instrument panel
blinks:
● Make sure the shift selector is in gear.
● Make sure the ignition switch is in the LOCK
position.
Ala