2010 Lancia Delta steering wheel

[x] Cancel search: steering wheel

Page 62 of 276

Lancia Delta 2010  Owner handbook (in English) GETTING TO KNOW YOUR CAR61
1
Deactivation
When the lights are switched off by the sensor, the dipped
beam headlights and side lights are switched off and the
daylight lights are switched on (if activa

Page 63 of 276

Lancia Delta 2010  Owner handbook (in English) 62GETTING TO KNOW YOUR CAR
DIPPED BEAM HEADLIGHTS/SIDE LIGHTS 
With the ignition key turned to MAR, turn the selector
wheel to 2. If dipped beam headlights are activated, the
daytime lights are switch

Page 64 of 276

Lancia Delta 2010  Owner handbook (in English) GETTING TO KNOW YOUR CAR63
1
LANE CHANGE FUNCTION
If you want to signal that you are changing lane, hold the
left-hand lever in the unstable position for less than half
a second. The direction indicat

Page 65 of 276

Lancia Delta 2010  Owner handbook (in English) 64GETTING TO KNOW YOUR CAR
“Smart washing” function
Pull the lever towards the steering wheel (unstable posi-
tion) to operate the windscreen washer jet. Keep the lever
pulled to activate both the

Page 71 of 276

Lancia Delta 2010  Owner handbook (in English) 70GETTING TO KNOW YOUR CAR
REAR COURTESY LIGHT fig. 33
Press the point indicated by the arrow to switch the lights
on/off (+ sign on the courtesy light lens cover).
The events that determine the light

Page 102 of 276

Lancia Delta 2010  Owner handbook (in English) GETTING TO KNOW YOUR CAR101
1
HEADLIGHT ALIGNMENT ADJUSTMENT
ABROAD
The factory adjustment of the dipped beam headlights de-
pends on the country where the car is purchased. When
you travel in countri

Page 103 of 276

Lancia Delta 2010  Owner handbook (in English) 102GETTING TO KNOW YOUR CAR
DST SYSTEM
(Dynamic Steering Torque)
This system is built into the advanced ESP control unit
and provides steering corrections via the electric power
steering during drivin

Page 104 of 276

Lancia Delta 2010  Owner handbook (in English) GETTING TO KNOW YOUR CAR103
1
When the function is active, “S” is displayed on the in-
strument panel. Press the button once again to deacti-
vate the function and return to the standard driving m