2010 Lancia Delta engine

CARE AND MAINTENANCE241
5
Exterior plastic parts must be cleaned in the same way
as the rest of the car.
Where possible, do not park under trees; the resinous sub-
stance many species release give the paint a dull appearance
and increase the possibility of triggering rust processes.
IMPORTANT Bird droppings must be washed off imme-
diately and thoroughly as the acid they contain is partic-
ularly aggressive.
Detergents cause water pollution. The car
should be washed in areas equipped for col-
lecting and purifying the liquid used in the
washing process.
Windows
Use specific window cleaner products.
Use also clean cloths to avoid scratching the glass or dam-
aging the transparency.
IMPORTANT Wipe the rear window inside gently with a
cloth in the direction of the filaments to avoid damaging
the heating device.
Engine compartment
At the end of each winter, thoroughly wash the engine
compartment, taking care to avoid directly hitting with
the water jet the electronic control units and the relay/fuse
control unit on the left side of the engine compartment
(running direction). Have this operation performed at a
specialised workshop.
IMPORTANT Perform this operation on a cold engine and
with the key at STOP. After the washing operation, make
sure that the various protections (e.g. rubber caps and
guards) have not been removed or damaged.
Front headlights
IMPORTANT Never use aromatic substances (e.g.: petrol)
or ketenes (e.g.: acetone) for cleaning front headlight plas-
tic lens.
To keep intact the aesthetic properties of the
paintwork do not use abrasive and/or pol-
ish products for cleaning the car bodywork.
215-242 Delta 3ed gb 11-11-2009 12:14 Pagina 241

TECHNICAL DATA243
6
Identification data ............................................................... 244
Engine codes - bodywork versions........................................ 246
Engine ................................................................................ 247
Fuel system ......................................................................... 249
Transmission ....................................................................... 250
Brakes.................................................................................. 250
Suspension.......................................................................... 251
Steering ............................................................................... 251
Wheels ................................................................................ 252
Dimensions......................................................................... 256
Performance ........................................................................ 257
Weight ................................................................................ 258
Consumables ....................................................................... 260
Fluids and lubricants........................................................... 262
Fuel consumption................................................................ 264
CO
2emissions..................................................................... 266
243-266 Delta 3ed gb 11-11-2009 12:16 Pagina 243

244TECHNICAL DATA
IDENTIFICATION DATA
The vehicle identification details are fig. 1:
A Identification plate (located in the engine compartment,
next to the upper attachment for the right-hand shock
absorber);
B Bodywork label (located on the passenger compartment
floor panel, next to the front passenger seat);
C Body paintwork identification label (located on the in-
side the tailgate);
D Engine label (located in the rear left-hand part, gear-
box-side).IDENTIFICATION PLATE fig. 2
This plate is applied to the engine compartment front
beam and shows the following identification data:
B Homologation number.
C Vehicle type code.
D Chassis manufacturing serial number.
E Maximum vehicle weight fully loaded.
F Maximum vehicle weight fully loaded with trailer.
G Maximum vehicle weight on front axle.
H Maximum vehicle weight on rear axle.
I Engine type.
L Body version code.
M Spare part code.
N Smoke opacity index (for diesel engines).
fig. 1L0E0116mfig. 2L0E0117m
243-266 Delta 3ed gb 11-11-2009 12:16 Pagina 244

TECHNICAL DATA245
6
CHASSIS MARKING fig. 3
This is printed on the passenger compartment floor pan-
el near the front right seat. Move flap A forwards to ac-
cess it.
The chassis marking includes:
❍vehicle type (ZAR 844000);
❍chassis manufacturing serial number.BODYWORK PAINT IDENTIFICATION PLATE
fig. 4
This plate is applied inside the bonnet and shows the fol-
lowing data:
A Paint manufacturer.
B Colour name.
C Lancia colour code.
D Respray and touch up code.
ENGINE MARKING
The engine marking is stamped on the cylinder block and
includes the model and the chassis number.
fig. 3L0E0118mfig. 4L0E0119m
243-266 Delta 3ed gb 11-11-2009 12:16 Pagina 245

246TECHNICAL DATA
198A4000
198A1000
198A2000
955A4000 (
▲)
844A1000
198A5000
844A2000 (
▲)
844AXA1A 00C
844AXA1A 00D (*)
844AXB1A 01C
844AXB1A 01D (*)
844AXC1A 02E
844AXC1A 02F (*)
844AXF1A 06E (
❏)
844AXF1A 06F (*)
844AXE1A 04C
844AXE1A 04D (*)
844AXD1A 03C
844AXD1A 03D (*)
844AXG1A 08 (
❏)
844AXG1A 08B
ENGINE CODES - BODYWORK VERSIONS
(*) Versions with 18” wheels
(
▲) For versions/markets where applicable
(
❏) Without DPF version
ENGINE CODE BODYWORK VERSION
1.4 Turbo Jet 120 HP
1.4 Turbo Jet 150 HP
1.6 Multijet
1.9 Twin Turbo Multijet
2.0 Multijet
243-266 Delta 3ed gb 11-11-2009 12:16 Pagina 246

198A1000
Otto
4 in line
72 x 84
1368
9,8
± 0,2
110
150
5500
206 (*)
21
2250/3000 (*)
NGK IKR9F8
Unleaded petrol
95 RON (Specification EN228)
198A4000
Otto
4 in line
72 x 84
1368
9,8
± 0,2
88
120
5000
206
21
1750
NGK IKR9F8
Unleaded petrol
95 RON (Specification EN228)
TECHNICAL DATA247
6
ENGINE
INTRODUCTION 1.4 Turbo Jet 120 HP 1.4 Turbo Jet 150 HP
Engine code
Cycle
Number and layout of cylinders
Piston bore and stroke mm
Total displacement cm3
Compression ratio
Maximum power (EEC) kW
HP
corresponding ratio rpm
Maximum torque (EEC) Nm
kgm
corresponding ratio rpm
Spark plugs
Fuel
(*) With SPORT function activated (where required)
243-266 Delta 3ed gb 11-11-2009 12:16 Pagina 247

844A1000
Diesel
4 in line
82 x 90.4
1910
16.5
± 0.4
139,5
190
4000
400
41
2000
Diesel fuel for
motor vehicles
(Specification EN590)
198A5000
844A2000 (▲)
Diesel
4 in line
83 x 90.4
1956
16.5
± 0.4
121,3/120 (
▲)
165/163 (▲)
4000
360
36.7
1750
Diesel fuel for
motor vehicles
(Specification EN590)
248TECHNICAL DATA
198A2000
955A4000 (▲)
Diesel
4 in line
79.5 x 80.5
1598
16.5
± 0.4
88/85 (
▲)
120/115 (
▲)
4000
300
31
1500
Diesel fuel for
motor vehicles
(Specification EN590)
(▲) For versions/markets where applicable
INTRODUCTION 1.6 Multijet 1.9 Twin Turbo Multijet 2.0 Multijet
Engine code
Cycle
Number and layout of cylinders
Piston bore and stroke mm
Total displacement cm3
Compression ratio
Maximum power (EEC) kW
HP
corresponding ratio rpm
Maximum torque (EEC) Nm
kgm
corresponding ratio rpm
Fuel
243-266 Delta 3ed gb 11-11-2009 12:16 Pagina 248

57 (
)–
8/10 –
7.1 –
4.3 (❍) 3.60 (❍)
4.6 (❍) 3.85 (❍)
1.87 1.7
–0.8
6–57 –
8/10 –
5.9 –
2.75 2.4
2.9 3.3
2.4 ()2 ()
–0.8
6–Unleaded petrol
not less than 95 R.O.N
(Specification EN228)
(

) Diesel fuel for motor vehicles
(Specification EN590)
Mixture of 50% distilled water and
50% PARAFLU UP (▲)
SELENIA K P.E.
SELENIA WR P.E. (❍)
TUTELA CAR TECHNYX
TUTELA CAR MATRYX ()
TUTELA TOP 4
Mixture of water and fluid
TUTELA PROFESSIONAL SC 35
260TECHNICAL DATA
CONSUMABLES
(▲) When the vehicle is used under particularly harsh climate conditions, we recommend using a 60-40 mixture of PARAFLU
UP and distilled water.
1.4 Turbo Jet 1.6 Multijet Recommended fuels litres kg litres kg and original lubricants
Fuel tank:
including a reserve of:
Engine cooling system:
Engine sump:Engine sump and filter:
Gearbox/differential casing:
Hydraulic brake circuit withABS system:
Windscreen/rear window
washer fluid reservoir:
243-266 Delta 3ed gb 11-11-2009 12:16 Pagina 260