2010 JEEP COMMANDER Owners Manual

Page 137 of 460

JEEP COMMANDER 2010 1.G Owners Manual POWER SUNROOF — IF EQUIPPED
The power sunroof switch is located on the overhead
console.WARNING!
•Never leave children in a vehicle with the key in
the ignition switch. Occupants, particularly una

Page 138 of 460

JEEP COMMANDER 2010 1.G Owners Manual Opening Sunroof — Express
Press the switch rearward and release, and the sunroof
will open automatically from any position. The sunroof
will open fully, then stop automatically. This is called
“Ex

Page 139 of 460

JEEP COMMANDER 2010 1.G Owners Manual Sunshade Operation
The sunshade can be opened manually. However, the
sunshade will open automatically as the sunroof opens.
NOTE:The sunshade cannot be closed if the sunroof is
open.
Wind Buffeting
Wi

Page 140 of 460

JEEP COMMANDER 2010 1.G Owners Manual NOTE:Hold onto shade handle until shade is com-
pletely open or closed.ELECTRICAL POWER OUTLETS
Your vehicle is equipped with 12 Volt power outlets that
can be used to power cellular phones, small ele

Page 141 of 460

JEEP COMMANDER 2010 1.G Owners Manual •To ensure proper operation a MOPARknob and
element must be used.
The front power outlets are located to the left and right of
the convenience tray (lower center of instrument panel).
Pull lightly

Page 142 of 460

JEEP COMMANDER 2010 1.G Owners Manual WARNING!
To avoid serious injury or death:
•Do not insert any objects into the receptacles.
•Do not touch with wet hands.
•Close the lid when not in use and while driving
the vehicle.
•If this

Page 143 of 460

JEEP COMMANDER 2010 1.G Owners Manual POWER INVERTER — IF EQUIPPED
There is a 115 Volt, 150 Watt inverter outlet located on the
back of the center console to convert DC current to AC
current. This outlet can power cellular phones, elect

Page 144 of 460

JEEP COMMANDER 2010 1.G Owners Manual may have to be reset manually. To reset the inverter
manually press the power inverter button OFF and ON.
To avoid overloading the circuit, check the power ratings
on electrical devices prior to using