2010 HONDA ODYSSEY ECO mode

[x] Cancel search: ECO mode

Page 141 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual Î
Î
ÎIf you unlock the door, but do not
open it within 15 seconds, the lights
go of f . With the driver’s door open,
you will hear a lights-on reminder
chime. The lights turn on again when you

Page 142 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual The select/reset knob on the
instrument panel controls the
brightness of the instrument panel
lights. Turn the knob to adjust the
brightness.
Separate adjustments can be made
when the headlights are o

Page 148 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual µµ
µ Press this button once
to unlock the driver’s door. Press it
twice to unlock the other doors and
the tailgate. Some exterior lights will
f lash twice each time you press the
button. If yo

Page 150 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual µ
µ µ
Press this button once
to unlock the driver’s door. Press it
twice to unlock the other doors and
the tailgate. Some exterior lights will
f lash twice each time you press the
button.
If y

Page 152 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual Avoid dropping or throwing the
transmitter.
Protect the transmitter from
extreme temperature.
Do not immerse the transmitter in
any liquid.
If you lose a transmitter, the
replacement needs to be
repro

Page 156 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual Locks all doors and tailgate when theshif t lever is moved out of the Park (P)position.
Make sure the shif t lever is in the
Park (P) position. Release the switch, and within 5
seconds, turn the ignit

Page 157 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual Locks all doors and tailgate when thevehicle’s speed reaches about 9 mph(15 km/h). On LX, EX, EX-L and Canadian DX
models
Make sure the shif t lever is in the
Park (P) position. Pushandholdthefronto

Page 158 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual Unlocks the driver’s door or all doorsand tailgate when the shif t lever ismoved into the Park (P) position.
Make sure the shif t lever is in the
Park (P) position.
Turn the ignition switch to the O