2010 HONDA CR-V key

[x] Cancel search: key

Page 293 of 441

HONDA CR-V 2010 RD1-RD5, RE7 / 3.G Owners Manual You can make calls using any phone 
number or a name in the HFL
phonebook. You can also redial the
last number called.Press and release the HFL Talk
button bef ore a command.
Say ‘‘ ’’ or ‘

Page 295 of 441

HONDA CR-V 2010 RD1-RD5, RE7 / 3.G Owners Manual If the phonebook you select is PIN- 
protected, you will need to enter the
PIN to access it. See page f or
more inf ormation.Select a phonebook you want to
choose a phone number f rom.
To search f or

Page 301 of 441

HONDA CR-V 2010 RD1-RD5, RE7 / 3.G Owners Manual Select a person f rom the list. Up to 
three category icons are displayed in
the lef t side of the list: 
Select the person’s number you want 
to call, and press the HFL Talk
button.
These indicate

Page 329 of 441

HONDA CR-V 2010 RD1-RD5, RE7 / 3.G Owners Manual Apply the parking brake. 
In cold weather, turn of f all 
electrical accessories to reduce
the drain on the battery.Without touching the accelerator
pedal, turn the ignition key to the
START (III) pos

Page 331 of 441

HONDA CR-V 2010 RD1-RD5, RE7 / 3.G Owners Manual µµ
If you have done all of the above and 
still cannot move the lever out of
Park, see on
page . This position mechani-
cally locks the transmission. Use
Park whenever you are turning of f or
star

Page 334 of 441

HONDA CR-V 2010 RD1-RD5, RE7 / 3.G Owners Manual This allows you to move the shif t 
lever out of Park if the normal
method of pushing on the brake
pedal and pressing the release
button does not work.Set the parking brake. 
Remove the key from the i

Page 350 of 441

HONDA CR-V 2010 RD1-RD5, RE7 / 3.G Owners Manual If you tow more than 8 hours in one 
day, you should repeat the above
procedure at least every 8 hours
(when you stop f or f uel, etc.)Only remove the fuse after you have
perf ormed the transmission s

Page 404 of 441

HONDA CR-V 2010 RD1-RD5, RE7 / 3.G Owners Manual In this case, the starter motor’s 
speed sounds normal, or even f aster
than normal, when you turn the
ignition switch to the START (III)
position, but the engine does not run.Are you using a proper
Page:   < prev 1-10 9-16 17-24 25-32 33-40 next >