2010 HONDA CR-V spare wheel

[x] Cancel search: spare wheel

Page 8 of 441

HONDA CR-V 2010 RD1-RD5, RE7 / 3.G Owners Manual Î
µ
...
Shif t Lever Position Indicators . 315
........................
Shif t Lock Release . 319
..............................
Side Airbags . 10, 29
...
How Your Side Airbags Work . 29 
How the

Page 343 of 441

HONDA CR-V 2010 RD1-RD5, RE7 / 3.G Owners Manual As required by the FCC:This device complies with Part 15 of theFCC rules. Operation is subject to thef ollowing two conditions: (1) This devicemay not cause harmf ul interf erence, and(2) this device

Page 388 of 441

HONDA CR-V 2010 RD1-RD5, RE7 / 3.G Owners Manual In addition to your regular 
inspections and inf lation pressure
maintenance, it is recommended that
you have annual inspections
perf ormed once the tires reach f ive
years old. It is also recommended

Page 397 of 441

HONDA CR-V 2010 RD1-RD5, RE7 / 3.G Owners Manual Replace the tire when you can see 
the tread wear indicator bars. The
replacement should be the same size
and design tire, mounted on the
same wheel. The spare tire is not
designed to be mounted on a

Page 399 of 441

HONDA CR-V 2010 RD1-RD5, RE7 / 3.G Owners Manual Take the jack out of the spare tire 
area. 
Turn the jack’s end bracket 
counterclockwise to loosen it, then
remove the jack by lif ting it
straight up. 
Unscrew the wing bolt and take 
the spare ti

Page 400 of 441

HONDA CR-V 2010 RD1-RD5, RE7 / 3.G Owners Manual CONT INUED
Use the extension and the wheel 
nut wrench as shown to raise the
vehicle until the f lat tire is of f the
ground. 
Remove the wheel nuts, then 
remove the f lat tire. Handle the
wheel nuts

Page 401 of 441

HONDA CR-V 2010 RD1-RD5, RE7 / 3.G Owners Manual Tighten the wheel nuts securely in 
the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
f acility.
Tighten the wheel nuts to:Place the flat tire face down

Page 402 of 441

HONDA CR-V 2010 RD1-RD5, RE7 / 3.G Owners Manual Your vehicle’s original tire has a 
tire pressure monitoring system
sensor. To replace a tire, ref er to(see
page ).
Store the jack in its holder. Turn
the jack’s end bracket to lock it in
place.