Either repeatedly press or holddown button1until the hoursnumber is correct.
Either repeatedly press orhold down button2until theminutes number is correct.
This completes the process.
Odometer and
tripmeters
Select the readings
Switch on the ignition.
Repeatedly press button1untilthe value you want appears inpanel2.
Each time the button is pressedthe display toggles:
Total distance covered
Tripmeter
Resetting tripmeter
Switch on the ignition.
Select the tripmeter.
Press and hold down button1until the tripmeter reading isreset.
Lights
Parking light
The parking lights switch onautomatically when the ignitionis switched on.
The side lights placea strain on the battery.Do not switch the ignitionon for longer than absolutelynecessary.
4
30
zOperation
ging the battery on the follow-ing pages
Do not turn the battery upsidedown
If the battery is not discon-nected, the on-board elec-tronics (e.g. clock, etc.) graduallydrain the battery. This can causethe battery to run flat. If this hap-pens, warranty claims will not beaccepted.
If the motorcycle is to be out ofuse for more than four weeks,disconnect the battery or con-nect a suitable trickle charger tothe battery.
Charging battery when
connected
Charging the connectedbattery directly at the bat-tery terminals can damage thevehicle electronics.
Always disconnect the batteryfrom the on-board circuits be-
fore recharging it with a chargerconnected directly to the batteryposts.
If you switch on the igni-tion and the multifunctiondisplay and telltale lights fail tolight up, the battery is completelyflat. Attempting to charge a com-pletely flat battery via the on-board socket can cause damageto the motorcycle's electronics.
If a battery has discharged to theextent that it is completely flat, ithas to be disconnected from theon-board circuits and chargedwith the charger connected dir-ectly to the battery posts.
With the battery connectedto the motorcycle's on-boardelectrical system, charge onlyvia the power socket.
Comply with the operating in-structions of the charger.
Charging battery when
disconnected
Charge the battery using asuitable charger.
Comply with the operating in-structions of the charger.
Once the battery is fullycharged, disconnect thecharger's terminal clips fromthe battery terminals.
The battery has to be re-charged at regular intervalsin the course of a lengthy periodof disuse. See the instructionsfor caring for your battery. Al-ways fully recharge the batterybefore restoring it to use
Removing battery
Switch off the ignition.
Remove the centre trim panel(100).
8
94
zMaintenance
