Instruments and warning /indicator lights
Warning/indicator lights
Overview
The warning/indicator lights indicate different functions
or a possible malfunction.
F ig . 7 Inst rum ent cluster with wa rning/in dicato r lig hts
Your vehicle is equipped with several important warning and indi
cato r lights to he lp yo u moni to r the continued re liable ope ration of
your vehicle=> &.
I
Dynamic steering *
Electronic power control => page 13
=> page 13
Electronic Stabilization
Program (ESP) => page 14
AIR
BAG
USA model s:
Airbag system
Canada model s:
Airbag system
Tire pressure too low *
Left t urn s ignal
Safety belt Ma lfunction Indicator Lamp (MIL)
adaptive cruise control*
D Hi gh beam
/ : Lane assist (system is ready)
Lane assist (system is not ready)
Power top operation
Right turn signal
CRUISE
USA models:
Cruise control activated
-
Canada model s:
Cruise contro l activated
=>page 14
=> page 1 4
=> page 14
=> page 15
=>page 15
=>page 15
=>page 122
=> page 15
:> page 15
=> page 15
=> page 51
=> page 15
=>page 15
=> page 15
USA models:
Anti-lock brake system => page 16
(ABS) defective
-
Canada models: Anti-lock brake sys-=>page 16
tern (ABS) defective
PARK USA models: Parking bra ke =>page 16
BRAKE
(® ) Canada model s:Parking br ake
=> page 16
--
BRAKE
USA models : Brake malfunction :::> page 17
Canada models: Bra ke malfunction
=> page 17
& WARNING
• Failure to heed warning lights and other important vehicle
information may result in serious per sonal injury or vehicle
damage.
• Whenever stalled or stopped for repair , move the vehicle a safe
di stance off the road, stop the engine, and turn on the emergency
flashe r
=> page 66.
• The engine compartment of any motor vehicle is a potentially
hazardous area . Before you check anything in the engine compart
ment, stop the engine and let it cool down . Always exercise
extreme caution when working under the hood =>
page 2 72,
" Engine compartment "
(I) Tips
Many funct ions a re mo nitored by the Auto-Check system=> page 26.
Ma lfunctions or faults w ill be identified either with a red symbol
(pr io rit y
1 -Dan ger!) or wi th a ye llow symbo l (priority 2 -War ning). •
Controls and equip
ment Safety first
Instruments and warning
/indicator lights
App lies to veh icles : w ith Aud i dr ive select
Dynamic steering
If the ind icator light() illumina te s w hen swi tching on t he ig nition
and goes ou t when the engine starts, dynamic steering is activated.
If the ind icator light
r ill uminates after the engine sta rts, a system
ma lfunct ion has occurred . Yo u can co ntinue to drive caref ully at a
re duced speed to a q ualified workshop. Steering can be more diffic ult
or sensit ive tha n usual. The stee ring w heel may a lso be at an angle
when driving straight.
& WARNING
Have the dynamic steering system malfunction repaired as soon
as possible by an author ized Audi d ealer or any qualified workshop
- risk of accident!
[ i ] Tips
• If the indicator light ~ flashes, dynamic stee ring is being re
initialized. The d river info rmation system display shows the words
"Dynamic steering : initialization" =>
page 32.
• The dy namic steering stab ility systems a re not availab le in the
event of a system ma lfunction .•
Electronic power control '
This warning/indicator Light monitors t he electronic
pow er control .
The C'., warning/indicator light (E lectronic Powe r Cont rol) illumi
nates when you turn o n the ignition as a function check .
Vehicle care Technical data
Instruments and warning /indicator lights
(I] Tip s
If this warning/indicator light illuminates while you are driving, then
there is a malfunction in the engine e lectronics. Have the ma lfunction
co rrected as soon as possib le by you r authorized Audi dealer or qua l
ified workshop .•
Electronic stabilization program (ESP) . />
If the <• indicator lamp b links whi le driving, the ESP or ASR (Anti -Slip
Regu lation) is actively regula ting.
If the
> indicator lamp illuminates, the system has switched the ESP
off. In this case, yo u can switch the ignition off and then on to switch
the ESP on again . The system is functioning completely when the
indicator lamp sw itches off.
If the ind icator lamp illuminates, the ESP was switched off with the
[ESP
OFF ] button .
ESP/ ABS f ault ! See owner 's manu al
If the indicator lamp and the )ABS indicator lamp illuminate and
the driver message appears, the ABS or e lectronic differentia l lock is
ma lfunction ing. This also interrupts the ESP. The brakes still function
with their normal power, but ABS is not act ive.
Drive to your authorized Audi dealer immediately to have the
ma lfunction corrected.
For more information abo ut the ESP::::>
page 240. •
Airbag system
ffl (USA models) l!lr (Canada models)
This warning/indicator light monitors the airbag and the
pretensioner systems .
The I (USA models)/ !.!r (Canada mode ls) warning light illuminates
for a few seconds each time you switch on the ignition.
If the
I (USA models) I !_~ -(Canada models) warn ing light does not go
out, or if it illumina tes while you are d riving, o r if it s tarts to blink,
then there is a malfunction somewhere in the system. If the l ight
does not illuminate when you swi tch on the igni tion, this a lso means
there is a malfunction .
& WARNING
If you ha ve a malfun ction in the airbag system , contact your
a uthoriz ed Audi de aler immediat ely. Otherwi se the airbag or the
belt pr etens ioner m ay not work properly in an accident. •
Appli es to vehicles: with t ire p ress ure mon itor ing system
Tire pressure monitoring system -telltale
indicator lamp )
The warning/indicator light appears in the event of a
significant loss of tire pressure or if there is a malfunc
tion .
The indicator light _) illuminates to check the function when you
sw itch on the ignition.
If the 'symbo l remains on or blinks after you switch on the ign ition,
there is a loss of tire pressure or a system malfunction . If t here is a
system malfunction, see your author ized Audi dealer as soon as
possible.
Detailed information on the t ire pressu re monitoring system can be
found in::::>
page 314. •
Instruments and warning /indicator lights
Anti-lock brake system (ABS) -- (USA models) /:' (Canada models)
This warning/indicator light monitors the ABS and the
electronic differential lock (EDL).
T he warning/ind icator light will come on for a few seconds wh en the
ign it ion is sw itched on . The light w ill go out after an automatic check
sequence is completed .
There is a malfun ction in the ABS when:
• T he warning/ind icator light does not illuminate when you switch
on the ig nition.
• T he warn ing/ind icato r lig ht does not go o ut a fter a few seconds .
• The warning/ind icator light illuminates while dr iving.
The brake syst em will still re spond even without the a ssistan ce of
th e AB S s ystem . See your authori zed Audi d ealer as s oon as
possible t o restore full braking performance.
For more informat ion
regarding the ABS=>
page 245.
The ABS warning light and the brake warning light come on
together. The ABS will no t work and you will noti ce a change in
brak ing response and performance.
Malfunction in the brake system
If the brake wa rning light => page 17 and the ABS warning illuminate
together there may be a malfu nction in the ABS, and the re may also
be a malfunction in the b rake system itself =>
& -
In the event of a malfunction in the brake system the wa rning/indi
cator light
BRAKE (USA models)/ ((D) (Canada models) in the instrument
cluster flashes . By pressing the
!SE T) button, you can bring up a
dr iver message w hic h explains the malfunct io n in more detail. Please
note =>
page 28. Malfunction in the electronic differential lock (EDL
)
The EDL works toge ther with the ABS . The ABS warning light will
come on if there is a malfunction in the ED L system=>
page 242 . See
your authorized Audi dea ler as soon as possible.
& WARNING
• If the , ~ .... (USA model s)/ :J (Canada models) warning light
does not go out, or if it comes on while driving, the ABS s ystem is
not working properly . The vehicle can then be s topped only with
the standard brake s (w ithout ABS ). You will not have the p rotec
tion ABS p ro vi des . Cont act your auth orized Audi dealer as s oon as
poss ible.
• USA model s: If the BRAKE warning light and the ~ warning
light come on together, the rear wheel s could lock up first under
ha rd braking . Rear wheel lock-up can caus e lo ss of v ehicle control
and an accident . Hav e your vehicl e repaired immediately by your
author ized Aud i dealer o r a qualified workshop . Drive slowly and
avoid sudden, hard brake application s.
• Canada model s: If the br ake warning light (CD) and the ABS
wa rning l ight 9 come on together , the rear wheels could lock up
first under hard b raking. Rear wheel lock -up can cause loss of
vehicle contr ol and an accident. Have your v ehicle repair ed imme
di ately b y your authorized Audi dealer or a qual ified workshop.
Drive slowly and avoid sudd en, hard brake applicati ons. •
Electromechanical parking brake
~E (USA models) /(®) (Canada models)
The warning/indicator light monitors the electromechan
ical parking brake .
With the parking brake app lied and the ign ition turned on, the
wa rni ng/indicator light i lluminates. Afte r the ignition has been
tur ned off, the warning/ind icator light continues to illum inate for
about 30 seconds. If the par king b rak e is applied with the ignition _,,,,
turned off, the warning/indicator light illuminates for about 30
se conds.
Th e warn ing/ind icator light will go out when the parking brake is
re leased .
If the war ning/indi cator lig ht flashes cont inuo usly
aft er applying th e
park ing brake, braking force is not sufficient to prevent the ve hicle
from roll ing unin ten tio na lly. Please note the following:
• If the s lope of the g round is too steep to park the ve hicle, the addi
tional drive message appears
Caution: Vehicle parked too steep .
• In the eve nt of a pa rking brake malfunction, the yellow ~ symbol
appears in the instrument cl uster disp lay and the drive r message
Parking brake ma lfunction! is displayed. H ave t he malfunction
repaire d as soon as possible by an authorized A udi dea le r or any other
qualified wo rkshop .•
Brake system BRAKE (USA
models)
/ {CD) (Canada models)
The warning/indica tor li ght flashes if brake fluid level is
l ow , if there i s an AB S system malf unctio n or a p arki ng
b rake malfuncti on.
The light illum inates whe n the ignition is turned on. It goes out after
th e engine ha s been sta rted . Thi s indi cates tha t the brake war ning
light is functioning properly .
If the brake warning light doe s not light up when the engine is
cranking, there may be a malfunction in the electrical system. In
this case, contact an authorized Audi dealer.
If the brake system wa rning/ind icator light flashes, there is a brake
system malfunction . By press ing the
[SET ] button, you can bring up a
driver message w hich expla ins the m alfu nct io n in more det ail
=>page 28.
Controls and equip
ment Safety first
Instruments and warning
/indicator lights
If the ABS fa ils, the ABS war ning/ indicator light sc-(USA
mode ls)/ (C anada models) fl ashes toge ther w it h th e bra ke system
warning/indicator light=>
&-
(USA mo dels): If the warning light BRAKE and the warning lig ht illu
m inate toge ther, imme dia te ly contac t you r autho rized Audi dealer or
qualified workshop to have all brake pads inspected=>
page 33.
When the ligh t comes on, an audi ble war ning signa l is al so give n.
& WARNING
• USA models: If the BRAKE warning light and the warning
light come on together, the rear wheels could lock up first under
hard braking. Rear wheel lock-up can cause lo ss of vehicle control
and an accident . Have your vehicle repaired immediately by your
authorized Audi dealer or a qualified work shop . Drive slowly and
avoid sudden, hard brake applications.
• Canada model s: If the brake warning light (CD) and the ABS
warning light :: come on together, the rear wheels could lock up
fir st under hard braking . R ear wheel lock -up can cause lo ss of
vehicle control and an accident. Have your veh icle repaired imme
diately by your authorized Audi dealer or a qualified workshop.
Drive slowly and avoid sudden, hard brake applications .
• If the brake warning /indicator light doe s not go out after a few
seconds and the parking brake released, or lights up while you are
driving , the fluid level in the brake fluid reservoir is too low. If you
believe that it is safe to do so, proceed immediately at low speed
to the nearest authorized Audi dealer or qualified repair facility
and have the brake sy stem inspected .
• Always keep in mind that after several brake applications, you
will need greater pressure on the brake pedal to stop your vehicle .
Do not rely on strained brakes to re spond with maximum stopping
power in critical situations. You must allow for increased braking
distances. The extra distance used up by fading brakes could lead
to an accident . •
Vehicle care Technical data
Parking brake Please get to a repair shop
- If this symbol appears when the vehicle is stationary or
after the ignition is turned on, check to see if the parking brake can be released. Drive to an authorized Audi dealer
or other qualified workshop as soon as possible and have
the malfunction corrected. If the parking brake cannot be
opened, then take it to an expert at an authorized Audi
dealer.
- If the symbol appears while you are driving, it is possible
that the traction control or the emergency brake has
malfunctioned . It is possible that the parking brake
cannot be applied. It is also possible that the parking brake cannot be released after it has been applied. Drive
to an authorized Audi dealer or other qualified workshop
to have the malfunction corrected.
If the ABS system malfunctions, the ABS warning/indicator light illu
minates together with the brake system malfunction warning/indi
cator light=>&, .
& WARNING
• Always observe the warnings in=> page 2 72, "Engine compart
ment", before opening the hood and checking the brake fluid.
• Driving with low brake fluid is a safety hazard. Stop the car and
get professional assistance.
• USA models: If the BRAKE warning light and the P warning
light come on together, the rear wheels could lock up first under
hard braking. Rear wheel lock-up can cause loss of vehicle control
and an accident. Have your vehicle repaired immediately by your
authorized Audi dealer or a qualified workshop. Drive slowly and
avoid sudden, hard brake applications.
• Canada models: If the brake warning light (Ci)) and the ABS
warning light come on together, the rear wheels could lock up
Controls and equip
ment Safety first
Driver information display
&, WARNING (continued)
first under hard braking. Rear wheel lock-up can cause loss of
vehicle control and an accident. Have your vehicle repaired imme
diately by your authorized Audi dealer or a qualified workshop.
Drive slowly and avoid sudden, hard brake applications. •
Engine cooling system malfunction _t_
A malfunction in the engine cooling system must be
repaired as soon as possible .
If the -~- symbol flashes in the display, either the engine
coolant
temperature is too high or the engine coolant level is
too low. A driver message appears as well to explain the
malfunction in more detail. The driver warning goes out after
about 5 seconds , but it can be brought up at any time by
pressing the
(SET] button again.
Switch off engine and check coolant level
- Pull off the road.
- Stop the vehicle.
- Turn off the engine .
- Check coolant level==>
page 287.
-Add coolant if necessary==> page 288.
- Continue driving only after the engine coolant
warning/indicator light goes out .
- Contact your authorized Audi dealer for assistance if
necessary .
If t he engine coolant level is correct, then the radiator fan may be the
cause of the malfunction .
~
Vehicle care Technical data
""L___::O:::.:., n:....:: t.:..:h :.:e :...:.. r.:::o :.::a :.: d=--------------------------------------------------
(I] Tips
For s afety reasons, t he pa rking br ake is r eleased automatically only
when the driver 's safety belt is engaged in the buck le .•
Starting off with a trailer
To prevent rolling back unintenti onally on an incline, do
the following :
-Keep the switch pu lled and depress the accelerator. T he
parking brake stays a pp lied and prevents the vehic le from
ro lling backward.
- You can re lease the switch once you are sure tha t you are
deve lopi ng enough driving force at t he wheels by
depressing the accelerator .
Depending on the we ight of the rig (vehicle and trailer) and the
sever ity o f the in cl ine, you may roll backwa rds as you start . You can
prevent roll ing backwards by holding the park ing brake sw itch pulled
out and accele ra ting -just as you wou ld when starting on a hill wi th a
conventional hand brake .•
Emergency braking
In the event that the conventional brake system fails or
locks .
-In an emergen cy , pull t he sw itch and contin ue to pull it to
slow your vehic le down with t he p arking brake.
- As soon as you re lease t he swi tch or acce lerate, the
bra king process s tops.
If you pull the switch and hold it above a speed of about 5 mph (8
km/h), the emergency braking fu nction is initiated . The vehicle is braked at all four wheels by activating the
hydraulic brake system.
Th e b rake pe rformance is s imila r to mak ing an eme rge ncy sto p .=>
&
In order not to act ivate the emergency brak ing by m istake, an audib le
warning tone (buzzer) sounds when the switch is pulled. As soon as
t he swi tch is re leased, or the acce lerator pedal is dep ressed , emer
gency braking stops .
& WARNING
Emergency braking should only be used in an eme rgency , when
the normal foot brake has failed or the brake pedal is obstructed .
Using the parking brake to perform emergency braking will slow
your vehicle down as if you had made a full brake application . The
laws of physics cannot be suspended e ven with ESP and its associ ·
at ed components (ABS, ASR, EDS ). In corners and when road or
weather conditions are bad , a full brake application can cause the
vehicle to skid or the rear end to break away· ri sking an accid ent. •
Driver messages in the instrument cluster
Warning Vehicle incline i s excessive
Th is message appears when the parking brake is applied on an incline
t ha t exceeds abo ut 3 0%.
I n th is case the braking power of the parking brake may
not be
adequate
to prevent the vehicle from rolling unintentionally.
Pl ease release parking brak e
Please note that for safety reasons the pa rking brake is re leased auto
matically on ly if the d river's seat be lt is fully engaged i n the buck le .
To relea se the parking brake pre ss the brake pedal
Th is dr iver message appears when the switch to release the parking
brake was pressed . The par king brake can only be released if you s tep
on the brake peda l and at the same time p ress the switc h or you auto- _.,
-HomeLink ® •m ___________________ _
Homelink®
Universal remote control
Applies to veh icles: w ith Hom elin k® un iversal re m ote contro l
General information
The Homelink ® feature can learn up to three radio
frequency codes for most current transmitters used for
operating garage doors, estate gates , home or outdoor
lighting systems, and other devices.
Yo u must fi rst p rogr am the Home link® tra nsmi tte r be fore you can
use the system=>
page 173, "Programming the Home link ® trans
m itter".
In order to program the Homelink ® transm itter fo r devices utilizing
rolling code, a second person on a ladder who can sa fely reach t he
garage door opener motor is recommended. It is also necessary to
locate the "learn" button on yo ur garage door opener motor . Re fer to
t he oper ating ins truc tions fo r th e opene r, as the loca tion and color o f
this button may vary by manufacturer .
Yo u can still use the original remote control for the device at any
t ime .
& WARNING
• Never use the Homelink'"' transmitter with any garage door
opener that does have not the safety stop and rever se feature as
required by fed eral safety standards. This includes any garage
door opener model manufactured before April
l , 1982 .
• A garage door opener which cannot detect an object, signaling
the door to stop and reverse does not meet current federal safety
standards . Using a garage door opener without these features
increases risk of serious injury or death.
& WARNING (cont inu ed )
• For safety reasons never release the parking brake o r start the
engine while anyone i s standing in front of the vehicle .
• A ga rage door or an estate gate may sometimes be set in
motion when the Homelink ® remote control is being
programmed. If the device is repeatedly activated, this can over
s train motor and dam age its electri cal components -an over
heated motor is a fi re hazard!
• To avoid pos sible injurie s or property damage , plea se always
make absolutely certain that no persons or objects are located in
the range of motion of any equipment being operated.
[ i ] Tips
• If you would like mo re inf orma tion o n Hom eli nk ®, whe re to
purchase the Homelink ® compat ible products, or would like to
purc hase the Homeli nk® Home Lighting Pac kage, p lease ca ll to ll
free : 1-800-355-3515 .
• F or Declaration of Compliance to United Sta tes FCC an d Indus try
Canada regulations=>
page 346. •