2009 YAMAHA T105 fuse box

PERIODIC MAINTENANCE AND ADJUSTMENT
6-26
6To install the battery
1. Place the battery in its compart-
ment. NOTICE: Be sure to install
the battery with its terminals
facing backward.
[ECA16590]
2. Make sure the key is turned
to“”.
3. Connect the positive battery lead
first, then the negative battery
lead.
4. Install the battery box cover by in-
stalling the screw.
5. Close the seat.
EAU47671
Replacing the fuse The fuse holder is located under the
seat. (See page 3-8.)
If the fuse is blown, replace it as fol-
lows.
1. Turn the key to“” and turn off all
electrical circuits.
2. Remove the battery box cover by
removing the screw.
3. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
rating than recommended toavoid causing extensive dam-
age to the electrical system and
possibly a fire.
[EWA15131]
4. Turn the key to“” and turn on
the electrical circuits to check if the
devices operate.
5. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
6. Install the battery box cover by in-
stalling the screw.
1. Battery box cover
2. Screw
1
2
1. Fuse
2. Spare fuseSpecified fuse:
10.0 A
12
U40BE0E0.book Page 26 Wednesday, January 7, 2009 10:05 AM