2009 TOYOTA SIENNA wheel

68 1-3. Adjustable components (seats, mirrors, steering wheel)
Center seat: Disengage the rear
leg locks by pulling the rear leg
release lever.
Reinstall the seat following the correct procedure.
■ Changing the installed position
Outer seat (7-passenger models)
The right side second seat can
be moved to the inside when the
console box (if equipped) is not
installed between the second
seats.STEP1
STEP2

69
1-3. Adjustable components (s
eats, mirrors, steering wheel)
1
Before driving
Center seat (8-passenger models)
The second center seat can be
used in the forward position.
To use the second center seat in the forward position, install it
according to the following procedure: Slide the front seats forward and stand the seatbacks in the
upright position. Fold the front seat side table (if
equipped) down.
Remove the second center s eat from the normal position.
(  P. 6 5 )
STEP1
STEP2
STEP3

70 1-3. Adjustable components (seats, mirrors, steering wheel)
Align the front leg hooks with the
rear strikers of the foremost pair.
Then swing up the seat.
Push the foot pedal forward to
securely latch the front leg locks.
Make sure the front legs are
locked securely, fold down the
seat and engage the rear leg
locks.STEP4
STEP5

71
1-3. Adjustable components (s
eats, mirrors, steering wheel)
1
Before driving
Folding the third seats (manual seats)
■ Before folding the third seats
Lower the head restraints to the
lowest position and stow the seat
belt buckles.
Stow the center seat belt. ( P. 86)
■ Folding the third seats
Pull the “TO FOLD/LIFT SEAT-
BACK” strap and fold down the
seatback.
■ Raising the third seats
Pull the “TO FOLD/LIFT SEAT-
BACK” strap and raise the seat-
back.
STEP1
STEP2

72 1-3. Adjustable components (seats, mirrors, steering wheel)
Folding the third seats (power seats)
You can operate the power third seats when the engine switch is in
the “ACC” or “LOCK” position, and/or the shift lever is in P.
■ Before folding the third seats
Lower the head restraints to the
lowest position and stow the seat
belt buckles.
Stow the center seat belt. ( P. 8 6 )
■ Folding the third seats
Press the folding/returning
switch.
■ Raising the third seats
Press the folding/returning switch, returning switch ( P. 7 6 ) o r
seatback angle adjustment switch ( P. 6 1 ) .
STEP1
STEP2

73
1-3. Adjustable components (s
eats, mirrors, steering wheel)
1
Before driving
Stowing the third seats (manual seats)
■ Before stowing the third seats
Fold down the seatbacks. ( P. 7 1 )
■ Stowing the third seats
Pull and hold the “TO STOW/
USE” strap and lift up the seat
rearward. Then push the seat
down.
If the seat does not lift up when
the “TO STOW/USE” strap is
pulled, lift the seatback by pulling
on the “TO FOLD/LIFT SEAT-
BACK” strap. Then push the seat-
back down again.
Push the seat against the floor
and make sure it is locked
securely.
STEP1
STEP2

74 1-3. Adjustable components (seats, mirrors, steering wheel)
■Returning the third seats
Pull and hold the “TO STOW/
USE” strap and lift up the seat
rearward.
Push the seat forward and then
engage the front leg locks.
Make sure the front legs are
locked securely.
Raise the seatback. (P. 71)
STEP1
STEP2
STEP3

75
1-3. Adjustable components (s
eats, mirrors, steering wheel)
1
Before driving
Stowing the third seats (power seats)
You can operate the power third seats when the engine switch is in
the “ACC” or “LOCK” position, and/or the shift lever is in P.
■ Before stowing the third seats
Lower the head restraints to the
lowest position and stow the seat
belt buckles.
Stow the center seat belt. ( P. 86)
■ Stowing the third seats
Push and hold the stowing
switch.
A beep sounds twice to indicate
the start of the operation. The
beep sounds again twice when
the operation is completed.
Open the flaps.
STEP1
STEP2
STEP1
STEP2