2009 RENAULT TWINGO RS Electrical Equipment - Radio R01-08 Workshop Manual

86A-73
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any faults.
V2 MR-413-X44-86A100$190.mif
RADIO
Fault finding – Fault Finding Chart86A
R01-08
Vdiag No.: A4
ALP 4 Radio is switched on, but the display does not work.
NOTESNone.
Consult ALP 1 No dialogue with the computer for the multimedia interface unit (see 86D, Multimedia interface
unit, Fault finding charts).
R108_VA4_ALP4

86A-74
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any faults.
V2 MR-413-X44-86A100$190.mif
RADIO
Fault finding – Fault Finding Chart86A
R01-08
Vdiag No.: A4
ALP 5 The radio control satellite does not operate or operates poorly
NOTESUse the Wiring Diagrams Technical Note for Clio III or New Twingo.
Has dialogue been established with the
multimedia interface unit (Display or
multimedia connection unit)?Consult ALP 1 No dialogue with the
computer for the multimedia interface unit
(see 86D, Multimedia interface unit,
Fault finding charts).
Check the condition of the radio control satellite
(see 86D, Multimedia interface unit,
Conformity check).
Are the checks correct?Contact the Techline.
NO
YES
YES
NO
A
R108_VA4_ALP5

86A-75
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any faults.
V2 MR-413-X44-86A100$190.mif
RADIO
Fault finding – Fault Finding Chart86A
R01-08
Vdiag No.: A4
ALP 5
CONTINUED 1
Check the condition and connection of the
satellite control connector, component code 325
(New Twingo) or 1519 (Clio III).
If the connector is faulty and there is a repair
method (see Technical Note 6015A, Repairing
electrical wiring, Wiring: Precautions for
repair), repair the connector, otherwise replace
the wiring.
Check the continuity, insulation and absence of
interference resistance on the following
connections:
•34AT, between components 653 or 1714
and 325 (New Twingo) or 1519 (Clio III),
•34AR, between components 653 or 1714
and 325 (New Twingo) or 1519 (Clio III),
•34AS, between components 653 or 1714
and 325 (New Twingo) or 1519 (Clio III),
•34AQ, between components 653 or 1714
and 325 (New Twingo) or 1519 (Clio III),
•34AU, between components 653 or 1714
and 325 (New Twingo) or 1519 (Clio III),
•34AP between components 653 or 1714
and 325 (New Twingo) or 1519 (Clio III),
•34AO between components 653 or 1714
and 1519 (Clio III only).If the connection or connections are faulty and
there is a repair procedure (see Technical
Note 6015A, Electrical wiring repair,
Wiring: Precautions for repair), repair the
wiring, otherwise replace it.
Are the checks correct?
If the fault is still present, contact Techline.
A
NO
NO
YES
B

86A-76
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any faults.
V2 MR-413-X44-86A100$190.mif
RADIO
Fault finding – Fault Finding Chart86A
R01-08
Vdiag No.: A4
ALP 5
CONTINUED 2
New Twingo:
Replace the radio control satellite, component
code 325 (see MR 392, 86A, Radio, Radio
control satellite: Removal - Refitting).
Clio III:
Replace the radio control satellite, component
code 1519 (see MR 411, 86A, Radio, Radio
control satellite: Removal - Refitting).
If the fault is still present, contact Techline
B
YES

86A-77
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any faults.
V2 MR-413-X44-86A100$190.mif
RADIO
Fault finding – Fault Finding Chart86A
R01-08
Vdiag No.: A4
ALP 6 Radio reception fault.
NOTESFor the aerial, use component code 1874 for a vehicle equipped with a navigation
system, and 1208 for a vehicle without this option.
See Clio III or New Twingo wiring diagrams.
See Clio III or New Twingo wiring diagrams.
Check the presence and condition of the radio
aerial.Replace the radio aerial, component code
1208 or 1874 (see MR 392, 86A, Radio, Radio
aerial: Removal - Refitting) for New Twingo
or (see MR 411, 86A, Radio, Radio aerial:
Removal - Refitting) for Clio III. Is the radio aerial correct?
Check the condition of the connections of the
radio aerial coaxial cable at the radio aerial,
component code 1208 or 1874 and of the radio,
component code 261.
Are the connections correct?If the connectors are faulty and if there is a
repair procedure (see Technical Note 6015A,
Repairing electrical wiring, Wiring:
Precautions for repair) repair the
connector(s); otherwise, replace the wiring.
NO
YES
NO
YES
A
R108_VA4_ALP6

86A-78
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any faults.
V2 MR-413-X44-86A100$190.mif
RADIO
Fault finding – Fault Finding Chart86A
R01-08
Vdiag No.: A4
ALP 6
CONTINUED
Display PR005 Radio field intensity, then
disconnect the radio aerial and display PR005
again.
Was the radio reception different during either
of these 2 tests?Contact the Techline.
Replace the radio aerial, component code 1208
or 1874 (see MR 392 (Clio III) or MR 411
(New Twingo), Mechanical, 86A, Radio,
Radio aerial: Removal - Refitting).
If the fault is still present, replace the radio,
component code 261 (see MR 392 (Clio III) or
MR 411 (New Twingo) Mechanical, 86A, Radio,
Radio: Removal - Refitting).
A
YES
YES
NO

86A-79
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any faults.
V2 MR-413-X44-86A100$190.mif
RADIO
Fault finding – Fault Finding Chart86A
R01-08
Vdiag No.: A4
ALP 7 The volume does not increase with the vehicle speed.
NOTESConsult the user manual to make the adjustments.
Check the volume adaptation value according to
the speed using the driver's handbook.
Is the value 0?Set the value to 2.
Contact the Techline.
YES
NO
R108_VA4_ALP7

86A-80
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any faults.
V2 MR-413-X44-86A100$190.mif
RADIO
Fault finding – Fault Finding Chart86A
R01-08
Vdiag No.: A4
ALP 8Backlighting does not change when the vehicle lights are
switched on
NOTESUse the Wiring Diagrams Technical Note for Clio III or New Twingo.
NOTE: Switch on the side lights and position the lighting rheostat wheel in the centre
position.
The display, component code 653, is only available when the vehicle does not have
the navigation function.
The multimedia connection unit, component code 1714, is only available when the
vehicle has the navigation function.
Check the backlighting of the following components:
radio, display and instrument panel.
Are all of the components backlit?
Attempt to backlight these components
once again, and if no conclusion can be
made, contact the Techline.
Does the instrument panel light up?Perform fault finding on the instrument
panel (see 83A, Instrument panel).
YES
NO
NO
YES
A
R108_VA4_ALP8