2009 RENAULT TWINGO Electrical Equipment - Instrument Panel Workshop Manual

83A-41
MR-413-X44-83A000$616.mif
V5
INSTRUMENT PANEL
Fault finding - Interpretation of statuses

Vdiag No.: 04, 08
83A
ET248
STOP WARNING LIGHT ACTIVATED BY THE SYSTEM
If the STOP WARNING LIGHT is illuminated, check for faults and check the conformity of the systems
concerned.
1 : Injection
2 : Coolant temperature
3 : Oil pressure
Perform fault finding on the injection system:
–Petrol: See 17B, Petrol injection,
–Diesel: See 13B, Diesel injection.
4 : Brake fluid level
See the interpretation of ET019 MINIMUM BRAKE FLUID LEVEL.
5 : Electronic Braking Distribution
Carry out fault finding on the ABS/ESP system (see 38C, Anti-lock braking system).
6 : Electric power assisted steering
Carry out fault finding on the EPAS system (see 36B, Power-assisted steering).
7 : Battery charge
Carry out fault finding on the charging circuit (see Technical Note 6014A, Checking the charging circuit).
If there are no faults, carry out a multiplex network check (see 88B, Multiplex).
AFTER REPAIRDeal with any faults displayed by the diagnostic tool.
Clear the computer memory.
Carry out a road test followed by another check with the diagnostic tool.
TDB_V04_ET248 / TDB_V08_ET248

83A-42
MR-413-X44-83A000$616.mif
V5
INSTRUMENT PANEL
Fault finding - Interpretation of statuses

Vdiag No.: 04, 08
83A
ET249
SERVICE WARNING LIGHT ACTIVATED BY THE SYSTEM
If the SERVICE WARNING LIGHT is illuminated, check for faults and check the conformity of the systems
concerned.
1 : Multiplex line communication
Check the multiplex network (see 88B, Multiplex)
2 : Injection
3 : Water present in diesel fuel
Perform fault finding on the injection system:
–Petrol: See 17B, Petrol injection,
–Diesel: See 13B, Diesel injection.
4 : Sequential gearbox
Carry out fault finding on the sequential gearbox (see 23A, Sequential gearbox).
5 : Vehicle speed circuit
Carry out fault finding on the ABS/ESP system (see 38C, Anti-lock braking system).
6 : Cruise control/speed limiter
Perform fault finding on the injection system:
–Petrol: See 17B, Petrol injection,
–Diesel: See 13B, Diesel injection.
7 : ESP
8 : ABS
Carry out fault finding on the ABS/ESP system (see 38C, Anti-lock braking system).
9 : Oil service interval
Perform fault finding on the injection system:
–Petrol: See 17B, Petrol injection,
–Diesel: See 13B, Diesel injection.
10 : Particle filter
Perform fault finding on the injection system:
–Petrol: See 17B, Petrol injection,
–Diesel: See 13B, Diesel injection.
11 : Airbag
Carry out fault finding on the Airbag system (see 88C, Airbag and pretensioners).
12 : OBD
Perform fault finding on the injection system:
–Petrol: See 17B, Petrol injection,
–Diesel: See 13B, Diesel injection.
If there are no faults, carry out a multiplex network check (see 88B, Multiplex).
AFTER REPAIRDeal with any faults displayed by the diagnostic tool.
Clear the computer memory.
Carry out a road test followed by another check with the diagnostic tool.
TDB_V04_ET249 / TDB_V08_ET249

83A-43
MR-413-X44-83A000$672.mif
V5
83A
INSTRUMENT PANEL
Fault finding - Parameter summary table
Tool parameter Diagnostic tool title
PR041Filtered fuel level

Vdiag No.: 04, 08
MR-413-X44-83A000$672.mif

83A-44
MR-413-X44-83A000$728.mif
V5
83A
INSTRUMENT PANEL
Fault finding - Interpretation of parameters
PR041 Filtered fuel level
NOTESIn the event of a fuel sender fault, check for the presence of DF007 FUEL SENDER
first.
This value is used to display the fuel level, i.e. the number of illuminated squares on the instrument panel.
Reference table displaying the filtered fuel level (PR041) in relation to the number of illuminated squares.
–0l to 5l: reserve square
–5l to 8l: 1 square
–8l to 12l: 2 squares
–12l to 18l: 3 squares
–18l to 25l: 4 squares
–25l to 32l: 5 squares
–32l to 37l: 6 squares
–37l to full: 7 squares
IMPORTANT
Once a square is no longer lit, it can not be relit except by adding fuel to the tank or running command VP020
UPDATE FUEL LEVEL DISPLAY.
AFTER REPAIRDeal with any faults displayed by the diagnostic tool.
Clear the computer memory.
Carry out a road test followed by another check with the diagnostic tool.
TDB_V04_PR041 / TDB_V08_PR041

Vdiag No.: 04, 08
MR-413-X44-83A000$728.mif

83A-45
MR-413-X44-83A000$784.mif
V5
83A
INSTRUMENT PANEL
Fault finding - Command summary table
Tool command Diagnostic tool title
VP020Update fuel level display
RZ001Fault memory

Vdiag No.: 04, 08
MR-413-X44-83A000$784.mif

83A-46
MR-413-X44-83A000$840.mif
V5
83A
INSTRUMENT PANEL
Fault finding - Interpretation of commands
VP020 UPDATE FUEL LEVEL DISPLAY
This command is used for updating the fuel level display.
Once the command has been run, PR040 CURRENT FUEL LEVEL and PR041 FILTERED FUEL LEVEL
must produce equivalent values.
In the event of a fault, refer to the interpretation of fault DF007 Fuel sender circuit.
TDB_V04_VP020 / TDB_V08_VP020

Vdiag No.: 04, 08
MR-413-X44-83A000$840.mif

83A-47
MR-413-X44-83A000$840.mif
V5
INSTRUMENT PANEL
Fault finding - Interpretation of commands

Vdiag No.: 04, 08
83A
RZ001 FAULT MEMORY
This command is used to clear the instrument panel system faults.
TDB_V04_RZ001 / TDB_V08_RZ001

83A-48
MR-413-X44-83A000$896.mif
V5
83A
INSTRUMENT PANEL
Fault finding - Customer complaints
NOTESOnly refer to the customer complaints after a complete check using the diagnostic
tool
Carry out fault finding on the multiplex network.
Carry out fault finding on the instrument panel.
NO COMMUNICATION WITH THE INSTRUMENT PANEL
THE INSTRUMENT PANEL DOES NOT LIGHT UPALP 1
THE FUEL LEVEL INDICATOR DOES NOT DISPLAY FULL
ALP 2
ADDITION OF FUEL NOT REGISTERED (NOT FULL)
ALP 3
DISPLAY JAMMED WHEN DRIVING (NOT MECHANICAL)
ALP 4
FAULT WITH NO WARNING GIVEN BY WARNING LIGHT (NO ADDITION OF FUEL
SINCE THE FAULT)ALP 5
FAULT WITH NO WARNING GIVEN BY WARNING LIGHT (ADDITION OF FUEL SINCE
THE FAULT)ALP 6
FAULT WITH DELAYED WARNING
ALP 7

Vdiag No.: 04, 08
MR-413-X44-83A000$896.mif