2009 Peugeot 407 warning
[x] Cancel search: warningPage 21 of 250
1INSTRUMENTS and CONTROLS
22
Battery charge warning
light
When the engine is running, this in-
dicates a charging circuit malfunction
(battery terminals, alternator belt).
Consult a PEUGEOT dealer. T y r e u n d e r - i n fl a t i o n w a r n i n g
light
This indicates that the tyre pressure is
too low.
A message on the multifunction display
indicates the wheel(s) concerned.
R e f e r t o t h e i n f o r m a t i o n l a b e l a f fi x e d
to the central pillar of the driver's door.
For your safety, check the tyre pres-
sures as soon as possible.
Electronic stability control system
(ESP) warning lights Activation warning light
Operation warning light
Deactivation warning light
Malfunction warning light
Power steering warning
light
This indicates a power steering fault.
It is linked with the STOP warning
light.
Consult a PEUGEOT dealer. Handbrake warning light
This indicates that the handbrake is
still applied or has not been released
correctly.
It is linked with the braking system
warning light. Low wash-wipe and
h e a d l a m p w a s h fl u i d l e v e l
warning light
When the wipers are switched on, this
i n d i c a t e s t h a t t h e fl u i d l e v e l i s t o o l o w .
Fill the wash-wipe and headlamp wash
fl u i d r e s e r v o i r .
Engine oil level warning
light
This indicates a critical engine oil level
(too low).
WARNING LIGHTS ON THE INSTRUMENT PANEL DISPLAY
These warning lights are displayed on
the instrument panel display.
STOP warning light
When this is displayed alone, it indi-
cates a power steering fault.
It comes on linked with the engine oil
pressure, coolant temperature, brak-
ing system or punctured tyre warning
lights.
Stop immediately.
Consult a PEUGEOT dealer.
Punctured tyre warning light
This indicates that one or more punc-
tured tyres have been detected.
A message on the multifunction display
i d e n t i fi e s t h e w h e e l ( s ) c o n c e r n e d .
It is linked with the STOP warning
light.
Stop immediately.
Consult a PEUGEOT dealer.
Stop immediately.
Change the damaged wheel and have
it repaired by a PEUGEOT dealer.
Page 22 of 250
1INSTRUMENTS and CONTROLS
23
T y r e u n d e r - i n fl a t i o n d e t e c t i o n
system warning light
This indicates the absence or mal-
function of one or more tyre pressure
sensors or a system fault.
Consult a PEUGEOT dealer.
Electronic engine
immobiliser warning light
This indicates an electronic engine im-
mobiliser system malfunction.
Consult a PEUGEOT dealer. Front brake pads wear
warning light
This indicates that the brake pads are
worn.
For your safety, have them replaced
by a PEUGEOT dealer.
Fuel tank cap warning light
(according to version)
With the engine running, this indicates
that the fuel tank cap is incorrectly se-
cured or absent.
It comes on in orange if the vehicle
speed is below 6 mph (10 km/h) and
in red if the vehicle speed is above
6 mph (10 km/h).
W a t e r i n d i e s e l fi l t e r
warning light
This indicates the presence of water
i n t h e d i e s e l fi l t e r . T h e r e i s a r i s k o f
damage to the injection system.
Contact a PEUGEOT dealer as soon
as possible. Door/boot open warning
light
With the engine running, this indicates
that an access has not been closed
correctly.
An illustration on the multifunction
d i s p l a y i d e n t i fi e s t h e a c c e s s ( e s ) c o n -
cerned.
It comes on in orange if the vehicle
speed is below 6 mph (10 km/h) and
in red if the vehicle speed is above
6 mph (10 km/h). Air bags warning light
This indicates an air bag fault.
Consult a PEUGEOT dealer.
Automatic headlamp beam
adjustment system warning
light
This indicates that the automatic
headlamp height adjuster is faulty.
Consult a PEUGEOT dealer.
Engine oil pressure warning
light
This indicates that the engine oil
pressure is too low.
It is linked with the STOP warning
light.
Stop immediately if it comes on while
the engine is running.
If there is a lack of oil in the lubrication
circuit, top up the level and contact a
PEUGEOT dealer as soon as possible.
Page 23 of 250
1INSTRUMENTS and CONTROLS
24
P a r t i c l e e m i s s i o n fi l t e r
saturation warning light
(Diesel engine)
With the engine running, this indicates
t h a t t h e p a r t i c l e e m i s s i o n fi l t e r i s s t a r t -
ing to become saturated (exceptionally
prolonged urban driving type condi-
t i o n s : l o w s p e e d , l o n g t r a f fi c j a m s . . . ) o r
a low diesel additive reservoir level.
I n o r d e r t o r e g e n e r a t e t h e fi l t e r , y o u a r e
advised to drive, as soon as possible
w h e n t h e t r a f fi c c o n d i t i o n s p e r m i t , a t a
speed of 40 mph (60 km/h) or above
f o r a t l e a s t fi v e m i n u t e s ( u n t i l t h e w a r n -
ing light is switched off).
If the warning light remains on, contact
a PEUGEOT dealer.
Following prolonged use of the vehi-
cle at very low speeds or at idle, you
may, exceptionally, notice an emission
of water vapour at the exhaust dur-
ing acceleration. This does not affect
the performance of the vehicle or the
environment.
Service warning light
This is displayed to indicate an engine
management system fault.
Contact a PEUGEOT dealer as soon
as possible. Automatic gearbox fault
warning light
This indicates an automatic gearbox
fault.
The gearbox will operate in down-
grade mode, locked in 3rd gear.
Never force the selector lever.
Consult a PEUGEOT dealer.
Electronically controlled
suspension fault warning
light
This indicates an electronically con-
trolled suspension malfunction.
Select automatic operation and con-
tact a PEUGEOT dealer as soon as
possible. Obstacle proximity
detection system warning
light
In reverse gear, this indicates an ob-
stacle proximity detection system
fault.
Consult a PEUGEOT dealer. Electronically controlled
suspension indicator lights
This comes on when the SPORT func-
tion is activated. This comes on when the
SPORT function is deactivated.
Automatic switching on of
the lights indicator light
Automatic switching on
of the lights deactivation
indicator light
Automatic wipers indicator
light
Automatic wipers
deactivation indicator light
This comes on when the AUTO func-
tion is activated.
This comes on when the AUTO func-
tion is deactivated.
This comes on when the AUTO func-
tion is activated.
This comes on when the AUTO func-
tion is deactivated.
Page 29 of 250
1INSTRUMENTS and CONTROLS
29
Range
(km or miles)
Current consumption
(l/100 or km/l or mpg)
This is the average quantity of fuel
consumed during the last few seconds.
This shows the distance that can still
be covered with the fuel remaining
in the tank in accordance with the
average consumption over the last
few miles (kilometres).
Distance remaining to be
travelled (km or miles)
Average speed
(km/h or mph) ''TRIP'' (Route) menu
Press the
''MENU'' button to gain access
to the general menu.
Select the ''Trip computer'' or ''Vehicle
diagnostics'' application using the navi-
g a t o r , t h e n c o n fi r m o r p r e s s t h e ''MODE''
button until you gain access to the trip
c o m p u t e r s c r e e n , t h e n c o n fi r m ''OK'' .
The ''Trip computer'' or ''Vehicle diagnostics''
menu offers various options:
- Warnings log,
- Status of the functions,
- Inputting of the distance to be
travelled.
Average consumption
(l/100 or km/l or mpg)
Distance travelled
(km or miles) Warnings log
This summarises the active warning
messages, displaying them on the
multifunction display in succession.
Status of the functions
This summarises the active or inactive
status of the functions present on the
vehicle.
Distance remaining
(km or miles)
When guidance is not activated, this
enables you to enter an approximate
distance to be travelled.
T h i s fi g u r e m a y i n c r e a s e i f
there is a change in the style
of driving or the road surface,
p r o d u c i n g a s i g n i fi c a n t d r o p i n
current consumption.
When the range is less than 20 miles
(30 km), four segments are displayed.
A f t e r fi l l i n g w i t h f u e l , t h e r a n g e i s
displayed when it exceeds 62 miles
(100 km). If horizontal segments are dis-
played for long periods instead
of digits, contact a dealer.
This function is displayed only when
the vehicle is travelling at a speed
greater than 20 mph (30 km/h).
This is the distance remaining to
the destination, either calculated at
any time by the navigation system if
guidance is activated or entered by
the user, minus the distance covered
since the distance was entered.
If digits are missing, dashes are dis-
played in their place.
This is the average fuel consumption
since the computer was last set to zero.
This indicates the distance travelled
since the computer was last set to zero. Access via the general menu
This is the average speed calculated
since the computer was last set to
zero (with the ignition on).
Page 30 of 250
2MULTIFUNCTION DISPLAYS
30
MONOCHROME DISPLAY C AND COLOUR DISPLAY C (WITH PC SOUND)
This displays the following information:
- the time,
- the date,
- the exterior temperature (the value d i s p l a y e d fl a s h e s i f t h e r e i s a r i s k o f
ice),
- t h e a c c e s s e s c h e c k ,
- the vehicle function status messages, displayed temporarily,
- the warning messages,
- the audio functions,
- the trip computer information,
- the vehicle parameters,
- the air conditioning parameters,
- the choice of language. General menu
D e fi n e t h e v e h i c l e p a r a m e t e r s
Permits the activation or deactivation
of certain driving and comfort ele-
ments.
Example: Automatic switching on of
the lights.
Press the "MENU" button to gain ac-
cess to the general menu and select
one of the following functions: Audio
Functions, Trip Computer, Person-
a l i s a t i o n / C o n fi g u r a t i o n a n d A i r C o n d i -
tioning.
Example: display selected on "Audio
Functions".
The " P e r s o n a l i s a t i o n - C o n fi g u r a t i o n "
menu provides access to successive
c o n fi r m a t i o n w i n d o w s .
M a n a g e m e n t o f t h e d i s p l a y s
The "AUDIO" , "TRIP" and "CLIM"
b u t t o n s o n t h e a u d i o e q u i p m e n t k e y -
pad permit displaying in the main win-
dow (on the right).
Example: TRIP C h o i c e o f l a n g u a g e
German, Spanish, French, English,
I t a l i a n , D u t c h , T u r k i s h , P o r t u g u e s e
and Brazilian Portuguese.
Page 32 of 250
2MULTIFUNCTION DISPLAYS
32
D i s p l a y
This menu allows you to set the bright-
ness of the display, the display colour
scheme and the colour of the map
(day/night and auto mode).
V e h i c l e
This menu permits the activation or
deactivation of certain driving and
comfort systems:
- air conditioning (A/C),
- vehicle information,
- access to the vehicle,
- driving assistance,
- l i g h t i n g c o n fi g u r a t i o n ,
- comfort lighting.
U n i t s
This menu permits selection of the
units: temperature (°C or °F) and
c o n s u m p t i o n ( k m / l , l / 1 0 0 , m i l e s a n d
mpg).
S y s t e m
This menu permits restoring of the
f a c t o r y c o n fi g u r a t i o n , d i s p l a y i n g o f t h e
software version and activation of the
scrolling text. F o r s a f e t y r e a s o n s , c o n fi g u r a -
tion of the multifunction dis-
plays by the driver must be
carried out when stationary. COLOUR DISPLAY(WITH PC NAV) "SETUP" menu
Press the SETUP button to gain access
to the "SETUP" menu. This provides
access to the following functions:
- System language,
- Date & Time,
- Display,
- Vehicle,
- Units,
- System.
S y s t e m l a n g u a g e
This menu allows you to select
the language used by the display:
German, English, Spanish, French,
Italian, Dutch, Polish, Portuguese.
D a t e & T i m e
This menu allows you to set the date
and time, the format of the date and
the format of the time (refer to the "Au-
dio and Telematics" section).
This displays the following informa-
tion:
- the time,
- the date,
- the exterior temperature (the value
d i s p l a y e d fl a s h e s i f t h e r e i s a r i s k o f
ice),
- t h e a c c e s s e s c h e c k ,
- the vehicle function status messag- es, displayed temporarily,
- the warning messages,
- the audio functions,
- the trip computer information,
- the air conditioning parameters,
- the satellite navigation system infor- mation.
Page 33 of 250
2MULTIFUNCTION DISPLAYS
33
HIGH DEFINITION COLOUR DISPLAY (WITH PC COM)
This displays the following information:
- the time,
- the date,
- the exterior temperature (the value d i s p l a y e d fl a s h e s i f t h e r e i s a r i s k o f
ice),
- t h e a c c e s s e s c h e c k ,
- the vehicle function status messages, displayed temporarily,
- the warning messages,
- the audio functions,
- the trip computer information,
- the air conditioning parameters,
- the satellite navigation system infor- mation.
General menu D i s p l a y c o n fi g u r a t i o n
Press the "MENU" button to gain ac-
cess to the general menu and select
one of the following functions: Naviga-
t i o n - G u i d a n c e , M a p , T r a f fi c I n f o r m a t i o n ,
A u d i o F u n c t i o n s , T e l e m a t i c s , C o n fi g u r a -
tion, Video, Vehicle Diagnostics and Air
Conditioning. - Choose colour,
- Adjust brightness,
- Adjust date and time,
- Choose units.
D e fi n e t h e v e h i c l e p a r a m e t e r s
Permits the activation or deactivation of
certain driving and comfort elements:
- p e r m a n e n t l o c k i n g o f t h e b o o t o n
the 407 Saloon,
- automatic switching on of the lights,
- automatic "follow-me-home" lighting,
- automatic rear wiping on engaging reverse gear on the 407 SW.
The " C o n fi g u r a t i o n " menu provides
access to the following functions:
- D i s p l a y c o n fi g u r a t i o n ,
- Sound,
- Choice of language,
- D e fi n e t h e v e h i c l e p a r a m e t e r s .
You can connect video equipment
(camcorder, digital camera, ...) to the
t h r e e v i d e o s o c k e t s , l o c a t e d i n t h e
glove box.
Video display is only possible when
stationary.
Select the Video menu from the general
menu:
- "Activate video mode" to activate/deactivate the video,
- "Video parameters" to set the dis- play format, the brightness, the con-
trast and the colours.
P r e s s t h e " E S C " o r " D A R K " b u t t o n t o
exit from video mode.
P r e s s t h e " S O U R C E " b u t t o n s e v e r a l
times in succession to select an audio
source other than that of the video. VIDEO MENU (WITH PC COM)
Page 74 of 250
4ACCESS
66
ALARM When the alarm is triggered, the siren
sounds and the direction indicator lights
fl a s h f o r a p p r o x i m a t e l y t h i r t y s e c o n d s .
After triggering, the alarm remains set,
ten times in succession.
On the eleventh time it will become
inactive again, until the next cycle of
disarming then setting of the alarm.
Warning: if button A indicator light
fl a s h e s r a p i d l y , t h e a l a r m h a s b e e n
triggered while you were away from
your vehicle.
Note: if the alarm has been triggered
i n y o u r a b s e n c e , t h i s fl a s h i n g s t o p s
when the ignition is switched on. Remote control failure,
alarm set
Unlock the doors with the key and
o p e n t h e d o o r . T h e a l a r m i s t r i g -
gered.
Switch on the ignition. The alarm is
disarmed.
* According to country.
Setting the alarm
Switch off the ignition and get out
of the vehicle.
S e t t h e a l a r m , b y l o c k i n g o r d e a d -
locking using the remote control
(button A i n d i c a t o r l i g h t fl a s h e s
once per second).
If you wish to lock or deadlock your
vehicle without setting the alarm, lock
it (one turn of the key) or deadlock it
( a s e c o n d t u r n w i t h i n fi v e s e c o n d s
maximum) using the lock. Disarming
Unlock the vehicle with the remote
control key.
The alarm is disarmed, indicator light
A
goes out when the ignition is switched on
(unless the alarm has been triggered).
To set the alarm with exterior
protection only
If, while you are away from the vehicle,
you wish to leave a window partially
open or a pet inside the vehicle, you
should choose exterior protection only.
Switch off the ignition,
I n t h e n e x t t e n s e c o n d s , p r e s s b u t -
ton A until the indicator light is on
continuously,
Get out of the vehicle,
S e t t h e a l a r m b y l o c k i n g o r d e a d -
locking using the remote control
(button A i n d i c a t o r l i g h t fl a s h e s
once a second). Incorrect operation
When the ignition is switched on, if
button
A lights for ten seconds, there
is a fault in the siren connection.
Contact a PEUGEOT dealer to have
the system checked.
Automatic activation *
The alarm is activated automatically
two minutes after the last closure of a
door or the boot.
In order to avoid accidental triggering
of the alarm when a door or the boot
is opened, it is essential to press the
unlocking button on the remote control
again.
When the alarm is set, if a door,
the tailgate or the bonnet is
not closed correctly, the siren
i s t r i g g e r e d b r i e fl y . I f t h e v e h i -
cle is closed correctly within the next
45 seconds, the alarm is set. In all cases,
the alarm is set after 45 seconds.
This provides two types of surveillance:
-
exterior protection: it sounds if
a door, the boot or the bonnet is
opened. - interior protection: it sounds if the
v o l u m e i n s i d e t h e p a s s e n g e r c o m p a r t -
ment changes (breaking of a window
or a movement inside the vehicle).