!
19
        Indicator and warning lamps  
 Visual  indicators  informing  the  driver  that  a  system  is  in  operation  (operation  or 
deactivation indicator lamps) or of the occurrence of a fault (wa rning lamp). 
  When the ignition is switched on  
 Certain  warning  lamps  come  on  for  a  few  seconds  when  the  vehi cle's  ignition  is 
switched on.  
 When the engine is started, these same warning lamps should  switch off. 
 If they remain on, before moving off, refer to the informati on on the warning lamp 
concerned.   
  Associated warnings  
 The  switching  on  of  certain  warning  lamps  may  be  accompanied  b y  an  audible 
signal and a message on the multifunction screen.   The  warning  lamps  may  come  on  
 c o n t i n u o u s l y   ( fi   x e d )   o r   fl   a s h .   
 Certain  warning  lamps  may  come  
on in two different modes. Only by 
relating  the  type  of  lighting  to  the 
operating status of the vehicle can 
it  be  ascertained  whether  the  situ-
ation  is  normal  or  whether  a  fault 
has occurred.  
  Operation indicator lamps  
   I f   o n e   o f   t h e   f o l l o w i n g   i n d i c a t o r   l a m p s   c o m e s   o n ,   t h i s   c o n fi    r m s   t h a t   t h e   c o r r e s p o n d -
ing system has come into operation.   
   
Warning lamp        is on        Cause        Action/Observations   
       
Left-hand 
direction  
indicato   
r          fl   a s h i n g   w i t h  
buzzer.    The lighting stalk is pressed 
down.   
    
   
Right-hand 
direction  
indicator         fl   a s h i n g   w i t h  
buzzer.    The lighting stalk is pushed 
up.   
    
   
Dipped beam 
headlamps         fi   x e d .      The lighting stalk is in the  
"Dipped beam headlamps" 
position.   Turn the control to the desired position 
       
Main beam 
headlamps         fi   x e d .      The lighting stalk is pulled  
towards you.   Pull the stalk to return to dipped beam 
headlamps.