Page 86 of 113
81
CHANGING A FUSE
Operating procedure for replacing a
faulty fuse with a new fuse to rectify a
failure of the corresponding function.
The fuse boxes are located under the
fascia and in the engine compartment.
Fascia fuse box
Unscrew the catch a quarter turn using
a coin then remove the cover to gain
access to the fuses.
The spare fuses and the pliers A are
s e c u r e d o n a r e m o v a b l e s u p p o r t fi x e d
horizontally inside the fascia fuse box. R e m o v i n g a n d fi t t i n g a f u s e
Before changing a fuse, the cause of the fault must be fou
nd and remedied. The
fuse numbers are indicated on the fuse box.
Use the pliers A .
Always replace a faulty fuse with a fuse of the same rating .
Pliers A
Correct Incorrect
Page 87 of 113
81
CHANGING A FUSE
Operating procedure for replacing a
faulty fuse with a new fuse to rectify a
failure of the corresponding function.
The fuse boxes are located under the
fascia and in the engine compartment.
Fascia fuse box
Unscrew the catch a quarter turn using
a coin then remove the cover to gain
access to the fuses.
The spare fuses and the pliers A are
s e c u r e d o n a r e m o v a b l e s u p p o r t fi x e d
horizontally inside the fascia fuse box. R e m o v i n g a n d fi t t i n g a f u s e
Before changing a fuse, the cause of the fault must be fou
nd and remedied. The
fuse numbers are indicated on the fuse box.
Use the pliers A .
Always replace a faulty fuse with a fuse of the same rating .
Pliers A
Correct Incorrect
Page 90 of 113
!
84
The electrical circuit of your
vehicle is designed to operate with
standard or optional equipment.
Before installing other electrical
equipment or accessories in your
vehicle, consult a PEUGEOT
dealer.
Some electrical accessories or
t h e w a y i n w h i c h t h e y a r e fi t t e d
may have an adverse effect on
the operation of your vehicle (its
electronic control circuits, the
audio circuit and the electrical
charging circuit).
PEUGEOT declines any respon-
sibility for expenses incurred
through the repair of your vehicle
or for any malfunctions resulting
from the installation of auxiliary
accessories, not supplied and not
recommended by PEUGEOT and
not installed in accordance with
PEUGEOT's instructions, in par-
ticular when the combined con-
sumption of all of the additional
equipment connected exceeds
10 milliamps.
The maxi fuses present provide
additional protection for the elec-
trical systems. Any work on these
fuses must be carried out by a
PEUGEOT dealer.
Fuse N° Rating Functions
MF1 20 A/50 A Fan unit without/with air conditio ning
MF2 20 A/30 A ABS/ESP
MF3 20 A/30 A ABS/ESP
MF4 70 A Built-in systems interface (BSI) supply
MF5 70 A Built-in systems interface (BSI) supply
MF6 - Not used
MF7 30 A Ignition switch supply
MF8 - Not used
