2009 OPEL ANTARA lock

Locks, doors, windows32
Automatic anti-dazzle interior mirror 3
Dazzle is automatically reduced.
With the ignition off, the mirror does not
dim.
Press button on mirror housing to turn
function on. Button will illuminate.
Press button again to turn off.
There are two light sensors in the mirror
housing. To avoid interference and loss of
function, do not cover the sensors or hang
anything on the mirror.
Electric windows
Operational with key in ignition switch
positions ACC or ON. If key is in LOCK
position or removed, windows can be
operated for 10 minutes or until driver’s
door is opened.
Operated via four switches located in the
driver’s door.
For incremental operation, briefly pull or
press the switch.
For automatic 3 opening or closing, pull or
press the switch longer. Pull or press the
switch again to stop the movement.
9 Warning
Care must be taken when operating the
electrically operated door windows.
There is a risk of injury, particularly for
children, and a danger that articles could
become trapped. Vehicle passengers
must be informed accordingly.
If there are children on the rear seats,
press the switch in the driver’s door to
lock rear window operation. Rear
windows can then only be operated via
the driver’s door switches.
Keep a close watch on the windows when
closing them. Ensu re that nothing
becomes trapped in them as they move.
Before leaving the vehicle, remove the
ignition key in order to prevent
unauthorized operation.

Locks, doors, windows33
Additional switches are located in the front
passenger’s door and the rear doors.
The rear windows do not open fully.Safety function
3
If the window glass encounters resistance
above the middle of the window during
automatic closing, it will stop immediately
and will be opened again.
In the event of difficulty due to frost or the
like, press the releva nt window switch
several times until the window is closed.
Child safety system for rear windows
Press z switch in driver’s door to lock rear
window operation.
With the lock on, rear passenger windows
can only be operated via the switches in
the driver’s door.

Locks, doors, windows34
Sun visors
Use the sun visor to protect from glare by
pulling it up, down or swivelling it to the
side.
Sun visors have vanity mirrors and a ticket
holder 3 on the rear.
When the vanity mirror covers are opened,
the sun visor lamp 3 will illuminate.
Slide/tilt sun roof 3

Operated via switch in roof lining when the
ignition switch is in positions ACC or ON.
With key in LOCK position in the ignition
switch or removed, the slide/tilt sun roof
can be adjusted for up to 10 minutes or
until a door is opened.
For incremental operation, briefly press the
button. For automatic opening or closing,
press and hold the switch. To open
Press switch rearwards; it will open
automatically unless th
e switch is pressed
again in another dire ction, or released.
To close
Press and hold switch forwards. Release
switch when sun roof reaches desired
position.
To tilt
Press and hold switch upwards. Release
switch when sun roof reaches desired
position.
To return sun roof to its original position,
press and hold switch downwards. Release
switch when sun roof reaches desired
position.

Locks, doors, windows 35
Note
zIf the top of the sun roof is wet, tilt it to
allow water to run off before opening the
sun roof.
z When carrying a roof load, check the
clearance of the sun roof, to avoid
damage.
9 Warning
Care must be taken when operating the
sun roof. Do not place any objects or
body parts in the sun roof opening.
Keep sun roof clear of debris. Do not
place heavy objects on or around
sun roof.
When leaving the vehicle unattended,
ensure the sun roof is fully closed.

Seats, interior36
Seats, interior
Front seats
Adjust seat longitudinally
To adjust, pull the handle on the front seat,
slide the seat and release the handle. Adjusting front seat backrests
To adjust, lift the release lever, move seat
backrest to suit seatin
g position and lock in
position when the lever is released.
Do not lean on the seat backrest whilst
adjusting it.
Front seats .......................................... 36
Rear seats............................................ 41
Seat belts............................................. 42
Child restraint systems
3................... 47
Airbag systems ................................... 52
Storage ................................................ 59
Drink holders ....................................... 67
Ashtrays 3........................................... 67
Warning triangle ¨ 3 ,
First aid kit +3................................ 68
Power outlets ...................................... 68
Assist grips .......................................... 69
9 Warning
Never adjust seats wh ilst driving as they
could move uncontrollably.

Seats, interior40
Removing the head restraintsInsert a suitable tool into the small hole in
the side of the guide sleeve without the
release button and depress the lock. Press
the release button on the other guide
sleeve and pull up the head restraint.
Stow head restraints securely in luggage
compartment.
Front seat armrest 3
The armrest can be slid forwards. Pull up
and hold upper lever and slide the armrest
forwards.
To return armrest to its rearmost position,
slide it back until it latches into position.
Console box in front armrest - see page 65. Folding down the passenger’s seat
3
Push front passenger’s seat head restraint
all the way down - see page 39.
Slide front passenger’s seat as far back as
it will go.
Fold seat forwards by lifting backrest
release lever and folding backrest down
onto seat cushion.

Seats, interior41
To raise the seat, lift backrest release lever
and push backrest to upright position.
Push and pull on seat backrest to ensure it
is locked, thus avoiding excessive forward
movement in the event of a collision.
Rear seats
To adjust backrests, lift release lever
located on top of backrest and move
backrest forwards or backwards to desired
position.
Do not lean on seat backrest whilst
adjusting it or make adjustments while the
vehicle is moving.
When folding the rear seat backrests,
ensure the seat belts are unbuckled. Folding rear seat backrests
The luggage compartment can be
enlarged by folding the rear seat backrests
onto the seat cushions.
To fold rear seat backrests separately,
unbuckle all three rear seat belts and
ensure front seats are not in reclined
position.
Push head restraints
all the way down, lift
backrest release lever and fold backrest
forwards and down onto seat cushion.
Do not allow passengers to sit on folded
backrest, or place an y unrestrained loads
on it.
9 Warning
If longer objects, e.g. skis, are to be
carried on the back of the front
passenger’s seat backrest, ensure they
are not in the area in which the front
passenger’s airbag inflates or in the area
between the seat backrest and the
vehicle body. In the event of a collision,
such objects may be thrown through the
vehicle.
The load must not hinder hand brake
operation or gearshifting.
Disregard of these notes can lead to
injuries which may be fatal.

Seats, interior42
Safety net 3 - see page 60.
Restoring rear seat backrests
Lift and push backrest up and backwards
to restore it to its original position. Ensure
backrest latches into place by pushing top
of backrest and pulling it forwards again.
Rear seat armrest 3
The armrest can be folded down.
If the rear centre seat is being used or the
rear seat backrests are being folded down,
fold armrest upwards.
Console box in rear armrest - see page 65.
Seat belts
Three-stage restraint system
The system comprises:
z Three-point seat belts.
z Belt tensioners, with load limiters, on the
front seats.
z Airbag systems for driver, front
passenger and rear outboard seat
occupants.
The three stages are activated in sequence
depending on the se riousness of the
accident:
z The automatic seat belt locking devices
prevent the belt stra p from being pulled
out and thus ensure that the vehicle
occupants are retained in their seats.
z The front seat belt buckles are pulled
downwards. As a result, the seat belts
are instantaneously tightened and the
occupants are made aware of the
deceleration of the vehicle at a very early
stage. This reduces stress placed on the
body.9 Warning
When folding the backrest, use caution -
beware of moving parts.
9 Warning
Ensure that the back rest returns to its
correct position - see page 38.
Never adjust the rear seat backrests
whilst the vehicle is moving. They could
move in an uncontrolled manner when
the lever has been pulled.