X
On downhill gradients: place the folding
wheel choc korasimilar item behind the
wheels of the fron tand rear axle. X
Using wheel wrench 0088,loosen the bolts on
the wheel you wish to change by about one
full turn .Donot unscrew the wheel bolts
completely.
Raising the vehicle G
Risk of injury
The jack is designed only to raise the vehicle
for ashort time while awheel is being
changed.
The vehicle must be placed on stands if you
inten dtow ork under it.
Make sure that the jack is placed on afirm,
non-slip, level surface. Do not use wooden
blocks or similar objects as ajack underlay.
The vehicle could otherwise slip off the jack
and seriously injure you.
Do not start the engine at any time while the
wheel is being changed.
Do not lie under the vehicle when it is being
supported by the jack .Ifyou do not raise the
vehicle as described, it could slip off the jack
(e.g. if the engine is started or adoor or the
boot lid is opened or closed) and seriously
injure you. G
Risk of accident
If you fail to position the jack correctly, the
vehicle may: R
slip off the jack
R injure you or others
R be damaged.
Thus, it is important to make sure that the jack
is positioned correctly in the respective jack-
ing points .Befor epositioning the jack,
remove any dirt that may have collected in the
jacking points.
The jacking point sfor the jack are located
behind the wheel housings of the fron twheels
and in fron tofthe wheel housings of the rear
wheels (arrows). Vehicles with AMG equipment:
the vehicle
has cover sfitted to protec tthe vehicle body
nexttot he jacking point sonthe outer sills. Vehicles with AMG equipment*
0046
Cover
X Vehicles with AMG equipment*: fold
cover 0046upwards. 270
Flat tyrePractical advice
*o
ptional
207_AKB; 2; 3, en-GB
mkalafa,
Version:2.11.8.1
2009-07-23T10:23:49+02:00
-Seite 270
