2009 MERCEDES-BENZ CLK-Class light

71 Audio
MP3 CD operation

Only touch the CD on the edges.

Clean the CD with a dry, lint-free cloth.
Wipe the CD a straight line from the
center. Never wipe the CD in a circular
motion.

Do not use rubbing alcohol or solvents
to clean CDs.

Do not expose the CDs to cold, heat or
direct sunlight.

Do not write or put labels on CDs.
Permissible MP3 CDs In MP3 mode COMAND can read CD-R and
CD-RW CDs.Permissible file systemsThe permitted file system for COMAND is
ISO9660/Joliet for CD-R and CD-RW.Multi session CDsMulti session CDs include mixed file types
(e.g. MP3 and audio CD) in either
successive or random order on the disc. In
MP3 mode, COMAND will integrate audio
CD tracks into the disc’s folder structure.
The CD audio track folder will appear first
followed by folders containing MP3 tracks.
Tips on caring for your MP3 CDs
Tips on creating MP3 CDsiCDs, software and hardware for writing
audio data to CDs vary widely.
Therefore, we cannot guarantee that
COMAND will be able to play every
user-written CD. Problems may also be
encountered during playback of user-
written CDs with a storage capacity of
more than 700 MB.
209_MY09_A_US.book Seite 71 Montag, 26. Mai 2008 6:12 18

77 Audio
MP3 CD operation
Selecting via the folder list
In the MP3 main menu
( page
75)
,
press the
Folder
soft key. The folder
list appears.

Push the joystick to G
or
g
to
select a folder.

Press E.COMAND changes the folder and loads
the data from the new folder. It may
take a while to load the data de-
pending on the number of folders and
tracks.
If a
folder was selected:
A list of MP3 tracks appears.If a
folder was selected:
The next level of the folder structure
will appear.

Push the joystick to G
or
g
to
select a track or another folder. Repeat
until desired track or folder appears.
The
Play
soft key is available if a track
is selected or the selected folder
contains only tracks and no subfolders.
When pressed, playback of the
highlighted track or the first track in
the selected folder will begin.
To go up one level in the folder structure:
Press
the
soft key.
iThe folder list only contains folders in
which MP3 or audio CD tracks are
stored.After inserting a MP3 CD the COMAND
begins loading the data. The
Folder

soft key may be greyed out during that
time. Once loaded the folder soft key is
available.
i
Folder contains MP3 tracksFolder contains subfoldersMP3 CD name
209_MY09_A_US.book Seite 77 Montag, 26. Mai 2008 6:12 18

90 Satellite radioSatellite radio operationYou will see the Satellite radio main menu
automatically after 8 seconds

if you press s.
Selecting a station on the memory list
In the Satellite radio main menu, press
the
Presets
soft key.
The Satellite preset memory ( page
89)
will appear.

Push the joystick to g
or G to high
-
light a memory preset.

Press E.The Satellite radio main menu will then
appear automatically after 8 seconds,
indicating the memory preset number
in the status line.

In the Satellite radio main menu, press
the
Info
soft key.
The information display will appear.You will see (if available)
the full station name

additional program information
Switching back to the Satellite radio main
menu
Press the
Back
soft key.
or
Press the
Info
soft key again.
iAn existing entry is overwritten in the
memory list when a new input is given.If the message
Updating station list

appears the presets may be overwrit-
ten.
Displaying information
209_MY09_A_US.book Seite 90 Montag, 26. Mai 2008 6:12 18

103 Telephone
Telephone operation
The system detects an incoming call, the
phone rings.Incoming calls are indicated in a window in
any system (e.g. radio).The window shows:
the caller’s number if it is transmitted
or

the caller’s name if her or his name and
number are saved in the phone book or

Unknown
.
Accepting a call 
Press k.
or
Press E to confirm
accept
.
The display will change to the
call
menu
( page
108)
. In the status
bar, the off-hook symbol will appear.
An active audio source will be muted.
You talk over the hands-free set.
Rejecting a call 
Press K.
or
Push the joystick to H to highlight
re-
ject
and than press E.
Setting the volume for hands-free ope
-
rationRaising the volume
Turn the rotary control on the e but
-
ton to the right.
Lowering the volume
Turn the rotary control on the e but
-
ton to the left.
Ending a call 
Press K.
or
Press the
End
soft key.
Incoming call
209_MY09_A_US.book Seite 103 Montag, 26. Mai 2008 6:12 18

105 Telephone
Telephone operation
Begin dialingWhen you have entered the telephone
number
Press E.
or
Press k.
or
In the Telephone menu, press the
Send

soft key.
Dialing will begin. If a name is associated
with the phone number saved in the phone
book, the name appears on the screen. In
the status bar, the off-hook symbol will ap
-
pear.COMAND will mute an active audio source.
If the person called answers the call, the
call is active. You talk over the hands-free
set.The message
Call failed
may

appear if you place an outgoing call.

Try again later.Subsequent dialingTransmitting other dial tones:
During a call you can press the number
keys 1 through 0, # and *.
Ending a call 
Press K.
or
Press the
End
soft key.
Redial 
Press k.
or
Press the
Dialed#
soft key.
The Dialed numbers list will appear.
The most recently dialed number is
highlighted.

Push the joystick g or G to select
the desired entry.
To dial the selected number:
Press E.
or
Press k.
or
Press the
Send
soft key.
209_MY09_A_US.book Seite 105 Montag, 26. Mai 2008 6:12 18

106 TelephoneTelephone operationSelecting an entry from the Received
calls listThe COMAND automatically generates a
list of the last 10 calls received. The list is
sorted chronologically with the most
recently received call at the top of the list.Displaying the list
In the Telephone menu
( page
102)
,
press the
Recvd#
soft key.
The list is displayed and the most
recently received call is highlighted.
Received calls listThe status bar shows:
the caller’s name if her or his name and
number are stored in the phone book

the message
Unknown
if no entry is
available

the telephone number
You can select the following functions:
Changing the list display

Selecting an entry and begin dialing

Ending a call
( page
105)
Changing the list display 
Press the
123
soft key.
The display changes to numbers.
or
Press the
ABC
soft key.
The display changes to names.
Selecting an entry and begin dialing
Push the joystick to g or G to
select the desired entry.

Press E.
or
Press k.
or
Press the
Send
soft key.
The telephone dials the number.
209_MY09_A_US.book Seite 106 Montag, 26. Mai 2008 6:12 18

107 Telephone
Telephone operation
Selecting an entry from the Dialed num
-
bers listThe COMAND automatically generates a
list of the last 10 numbers dialed. The list
is sorted chronologically with the most
recently dialed number at the top of the
list.Displaying the list
In the Telephone menu
( page
102)
,
press the
Dialed#
soft key.
The list is displayed and the most
recently dialed number is highlighted.
Dialed numbers listThe status bar shows:
the caller’s name if her or his name and
number are stored in the phone book

the message
Unknown
if no entry is
available

the telephone number
You can select the following functions:
Changing the list display
( page
106)

Selecting an entry and begin dialing ( page
106)

Ending a call
( page
105)
Toggling between lists
Push the joystick to H or h to
select the desired list.
Missed callsIf there are one or more missed calls avai
-
lable on the mobile phone, a correspon
-
ding message will appear.
Press the
Back
soft key or press E to
return to the Telephone menu.
209_MY09_A_US.book Seite 107 Montag, 26. Mai 2008 6:12 18

111 Telephone
Telephone operation
The phone book contains all entries
of the internal memory of the mobile
phone (TDMA, CDMA and GSM mobile
phone)

of the SIM card (GSM mobile phone)
Displaying the phone book 
In the Telephone menu
( page
102)
,
press the
Z
soft key.
The phone book will appear.
The first entry found is at the top of the list
and highlighted.
Entries marked with symbols have been
imported into the phone book from the in
-
ternal memory of the mobile phone. Usable phone number categories:
Symbol
: Cell number

Symbol
: Home number

Symbol
: Work number
And additional categories:
Symbol
: Fax number

Symbol
: Pager number

Symbol
: Main number
Phone book
Phone book
entry
Status bar shows
A phone number
Unknown
A name for a
phone number
The phone number
Several numbers
Several numbers
209_MY09_A_US.book Seite 111 Montag, 26. Mai 2008 6:12 18