Cruise (speed) Control and ACC1. SET \b use to set the road speed to be
maintained or increase/decrease the speed
in 2 km/h (\f mph) steps when cruise
control is operating.
2. RESUME \b use to resume a set speed
retained in memory.
\f. CANCEL \b cancels cruise control but
retains the set speed in memory.
ACC only
ACC utilises a radar at the front of the vehicle to
maintain a pre\bdefined gap to the vehicle ahead.
When a slower vehicle ahead is encountered, or a
vehicle ahead enters the same lane, the previously
set cruise control road speed will be adjusted
automatically to maintain the set gap.
Cruise control will automatically disengage when
the foot brake is pressed or when vehicle speed
falls below 30 km/h (\f8 mph).
Depending on specification, your vehicle will be fitted
with either the standard cruise control system or the
Adaptive \fruise \fontrol system (A\f\f). Both systems
allow you to maintain a set speed until either cruise
control is cancelled or the brake pedal is used. A\f\f
also allows you to maintain a gap between yourself
and the vehicle ahead when the speed of that vehicle
is not greater than yours. Both systems are controlled
via switches on the steering wheel.
Driving
2
1
5
3
4
ACC
IS NOT a collision warning or avoidance
system. Additionally the system WILL NOTdetect:
• Stationary or slow moving vehicles below \f0 km/h (6 mph).
• Pedestrians or objects in the roadway.
• Oncoming vehicles in the same lane.
10
A warning lamp will illuminate to indicate
that the vehicle is in follow mode.
4. GAP SETTING \b use to increase/decrease the
time gap to the vehicle ahead. The gap can be set
to one of four pre\bdefined settings (\f to 4
chevrons).
The current setting will
be displayed in the
message centre.
Forward Alert
This is a feature of ACC and it provides limited
detection of objects in the road ahead. When
necessary it will give an audible warning and a visual
warning in the message centre. The driver must take
appropriate action.5. Press to activate the Forward Alert function.
The Forward Alert icon will illuminate in the
instrument panel.
Sensitivity of detection can be adjusted. With ACC
disengaged, usethe GAP SETTINGcontrol4to
adjust the setting.
Cruise (speed) control and Adaptive Cruise control
