Rear seat release handles
The split fold rear seats have release handles
located in the luggage compartment. Pull to release
one or both seat backs and fold forward. Head
restraints can be removed if required.
Engine start stop
P R N D S
STARTENGINESTOP
Operating note
TheSTART STOP button must be pressed to stop
the engine. If not, it will continue to run even if the
remote handset is removed from the vehicle.
The START STOP button is operational only when
the Jaguar Smart Key is inside the vehicle.
Ignition only on:
• A single press of the START STOPbutton will
switch on the ignition.
• A second press will switch off the ignition.
Engine start
• With the footbrake depressed, press and release the START STOP button to start the engine. The
JaguarDrive Selector will rise from the centre
console in readiness for gear selection.
• Press again to stop the engine and switch off the ignition.
Cold climate starting
In extreme low temperatures, there may be a delay of
up to \f2 seconds between the START STOPbutton
being pressed and the engine cranking. Ensure the
footbrake remains depressed. Do NOT press the
START STOP button again. Cranking time will be
increased.
Luggage compartment
Opening the luggage compartment
• With the vehicle unlocked or locked, press the luggage compartment button on the Jaguar Smart
Key.
• With the vehicle unlocked or locked from the inside, press the button on the facia.
• With the vehicle unlocked, press the release button under the luggage compartment chrome finisher.
\f
Driving position memory
Seat belts
Ensure that passengers do not fully extend the
restraints and inadvertently engage the ALR feature
during normal use.A warning indicator on the instrument
pack will illuminate if a front seat belt is
unbuckled.
Automatic Locking Reels (ALR)
All passenger seat belts have ALR fitted primarily for
use with child seats but also for securing large items.
Refer to Child safety in the Owner’s Handbook for
further details.
Glovebox and valet mode
To set your personal security code:
• On the touch\bscreen select HomethenVehicle
followed by Veh. settings.
• Now select Valet mode.
• Enter a four digit code and touch OK.Valet on is
displayed as a confirmation.
To deselect valet mode
Access the Valet mode screen and enter your
personal four digit code. Now press OK.Valet off is
displayed and the glovebox and luggage
compartment are now accessible.
Insert the emergency key blade back into the Jaguar
Smart Key.
Driver's seat
When you have found your ideal driving position, the
vehicle can memorise seat, steering column and
mirror settings for future use.
1. Press the SETbutton located in the driver’s
door storage area. The red LED will
illuminate for a five second period.
2. While the LED is illuminated, press button 1
or 2to memorise the current settings.
The LED will extinguish and a chime will sound to
confirm that the settings have been memorised. If the
ignition is on, the message centre will display a
confirmation message.
Operating note
A seat position will only be memorised during the
five second period that the LED is illuminated.
An existing memory setting can be over\bwritten with
a new memory position.
Recalling a seat position
Press and hold button 1or 2until
the seat has finished moving.
5
To open the glovebox, place a finger directly onto the
icon.
Valet mode
The glovebox and luggage compartment can be
security locked to deny access to a parking
attendant. Before handing over your Jaguar Smart
Key, remove the emergency key blade and keep it in
a safe place.
