2009 FIAT PANDA change time

9
RADIO
CD PLAYER
INTRODUCTION
QUICK
GUIDE
FUNCTIONS
AND ADJUSTMENTS
SELECTING THE RADIO
AND CD FUNCTIONS
By pressing the SRC button briefly and re-
peatedly, it is possible to select the Radio
(Tuner) and CD functions cyclically:
❒TUNER (“FM1”, “FM2”, “FMT”, “AM”);
❒CD (only if a CD is inserted).
If the SRC button is pressed when no CD
is present, the display will show NO CD.
The Mute function is automatically acti-
vated during the display of the message.
When this time has elapsed, the radio will
return automatically to Radio mode
(Tuner).AUDIO SOURCE
MEMORY FUNCTION
If the radio function is selected whilst lis-
tening to a CD, playing is interrupted and
is resumed from the same point when re-
turning to the CD source.
If the CD function is selected whilst lis-
tening to the radio, the last station se-
lected is tuned into when returning to the
Radio source.
VOLUME ADJUSTMENT
Turn the ON/OFF button/knob to adjust
the volume (from a minimum level of
0 to a maximum level of 40).
If the volume level is changed during the
transmission of traffic news, the new set-
ting will only be maintained until the up-
date is finished. TURNING THE CAR RADIO ON
The car radio comes on when the ON/OFF
button/knob is pressed.
When the car radio is turned on, the vol-
ume is limited to a setting of 20 if it had
been set higher when previously used.
If the car radio is turned on when the ig-
nition key is in the STOP position, it will
turn off automatically after approx. 20
minutes. After the radio has switched it-
self off automatically it can be turned on
for a further 20 minutes by pressing the
ON/OFF button/knob.
TURNING THE CAR RADIO OFF
Keep the ON/OFF button/knob pressed.
F F
U U
N N
C C
T T
I I
O O
N N
S S
A A
N N
D D
A A
D D
J J
U U
S S
T T
M M
E E
N N
T T
S S
603_97_412 Radio FunPanda EN:MY 09 9-10-2009 13:44 Pagina 9

QUICK
GUIDE
12
CD PLAYER
INTRODUCTION
FUNCTIONS
AND ADJUSTMENTS
RADIO
FREQUENCY BAND
SELECTION
With the Radio mode active, press the
BAND button briefly and repeatedly to se-
lect the desired reception band.
Each time the button is pressed the fol-
lowing bands are selected cyclically:
“FM1”, “FM2”, “FMT” and “AM”.
Each band is highlighted by the name in the
display.
The last station selected on the respective
frequency band will be tuned into.
The FM band is divided into sections: FM1,
FM2 and FMT; the FMT reception band is
reserved for broadcasters stored automat-
ically using the Autostore function.PRESET BUTTONS
The buttons numbered from 1 to 6 are
used to set the following preselections:
❒18 in the FM band (6 in FM1, 6 in FM2,
6 in FMT);
❒6 in the AM band.
To listen to a preset station, select the de-
sired frequency band and then briefly press
the corresponding preset button (from
1 to 6).
By pressing the preset button for more
than 2 seconds, the tuned station will be
stored. The storing phase is confirmed by
an acoustic signal.
STORING THE LAST STATION
LISTENED TO
The radio automatically stores the last sta-
tion that was selected for each reception
band, which is then tuned into when the
radio is turned on or when the reception
band is changed. INTRODUCTION
When the car radio is turned on, the last
function that was selected before turning
it off (Radio or CD) is activated.
To select the Radio function whilst listen-
ing to a CD, press the SRC button briefly.
Once the Radio mode has been activated,
the display will show the name (RDS sta-
tions only) or the frequency of the se-
lected radio station, the frequency band
selected (e.g. FM1) and the preselect but-
ton number (e.g. P1).
R R
A A
D D
I I
O O
( (
T T
u u
n n
e e
r r
) )
603_97_412 Radio FunPanda EN:MY 09 9-10-2009 13:44 Pagina 12

QUICK
GUIDE
14
CD PLAYER
INTRODUCTION
FUNCTIONS
AND ADJUSTMENTS
RADIO
To interrupt the A-STORE function, press
one of the following buttons:
❒BAND (short and long press);
❒¯or ˙(short or long press);
❒one of the preset buttons (1,2,3,4,5,6);
❒˚(if a CD is inserted it will be ejected).
When the A-STORE function has finished,
the radio will automatically tune into the
first preset station on the FMT band
stored on the preset 1 side.
The stations that have a strong signal at
that moment are then automatically
stored in the preselected band in the but-
tons numbered 1 to 6.
When the A-STORE function is activated
within the AM band, the FMT band is au-
tomatically selected and the function is
performed.
IMPORTANT Sometimes the A-STORE
function does not manage to find 6 sta-
tions with a strong signal. In this case, the
previous stations stored will be duplicat-
ed in the free preset buttons.EMERGENCY ALARM
RECEPTION
The radio can receive emergency alerts in
RDS mode in exceptional circumstances
where dangerous situations are threat-
ened (earthquakes, floods, etc.) if these are
being transmitted by the broadcaster
tuned into.
This function is activated automatically and
cannot be turned off.
The wording “ALARM” will be shown in
the display during the transmission of an
emergency alert. During this announce-
ment the car radio volume will change,
similarly to what occurs when a traffic up-
date is being received (see “TA FUNC-
TION” paragraph).EON FUNCTION
(Enhanced Other Network)
In some countries, there are circuits that
group multiple broadcasters that transmit
traffic information together. In this case,
the programme of the station that is be-
ing listened to will be temporarily inter-
rupted to:
❒receive traffic information (only with
the TA function on);
❒listen to regional transmissions each
time they are transmitted by one of the
broadcasters in the same circuit.
STEREOPHONIC
BROADCASTERS
If the incoming signal is weak, the repro-
duction is automatically switched from
Stereo to Mono.
603_97_412 Radio FunPanda EN:MY 09 9-10-2009 13:44 Pagina 14

QUICK
GUIDE
16
CD PLAYER
INTRODUCTION
FUNCTIONS
AND ADJUSTMENTS
RADIO
REG function
(regional transmission reception)
Some national broadcasters will transmit
regional programmes at certain times of
the day (that vary from region to region).
This function makes it possible to tune in-
to local (regional) broadcasters automat-
ically (see EON function paragraph).
If you want the radio to automatically tune
into the regional stations being broadcast
on the network selected, the function
must be activated.
To turn the function on/off, use the
¯or
˙buttons.The current status of the function will ap-
pear on the display:
❒“REG ON”: function activated.
❒“REG OFF”: function deactivated.
If the function is deactivated and you have
tuned into a regional station working in a
given area and you enter a different area,
then the regional station received in the
new area will be broadcast.
WARNING If the AF and REG functions
are on at the same time, once a border be-
tween two regions is crossed, the radio
may not switch correctly to a valid alter-
native frequency. WARNING In some countries there are
radio stations that, although enabled, do
not transmit traffic information.
If the radio is tuned to a station in the AM
band, when TA is activated it will tune to
the last selected station in the FM1 band.
The volume at which the traffic news
is transmitted depends on the listening
volume:
❒listening volume below 20: traffic news
volume 20 (fixed value);
❒listening volume above 20: traffic news
volume equal to listening volume +1.
If the volume is changed during the traffic
news, the level will not be shown on the
display; the new level will only be main-
tained during the update.
The TA function can be interrupted by
pressing any button on the car radio.
603_97_412 Radio FunPanda EN:MY 09 9-10-2009 13:44 Pagina 16