QUICK
GUIDE
18
INTRODUCTION
FUNCTIONS
AND ADJUSTMENTS
RADIO
CD PLAYER
ERROR
MESSAGES
If the CD is not legible (for example a CD-
ROM was loaded or a CD was loaded up-
side down or there is a playback error),
the message “CD ERROR” will appear on
the display for approximately 2 seconds.
When this time has elapsed, the Radio
(Tuner) mode is activated automatically
(the CD is not automatically ejected, press
the
˚button to eject it).
DISPLAY INFORMATION
When the CD player is operating, the fol-
lowing information will appear on the dis-
play that has the following meaning:
“T1”: indicates the CD track number;
“0.42”: indicates the time elapsed since the
start of the track.TRACK SELECTION
(forward/backward)
Briefly press the
¯button to play the pre-
vious CD track and the
˙button to play
the next track. The tracks are selected
cyclically: the first track is selected after
the last track and vice versa.
If the track has been played for more than
3 seconds, pressing the
¯button will
cause the track to be started again from
the beginning. In this case, if you want to
play the previous track, press the button
twice consecutively.
FAST FORWARD/REVERSE
TRACK SELECTION
Keep the
˙button pressed down to fast
forward the selected track and keep the
¯button pressed down to fast rewind the
track. The fast forward/back will stop once
the button is released.PAUSE FUNCTION
To pause the CD player, press the
ON/OFF button briefly. “PAUSE” will be
shown on the display.
To resume listening to the track, press the
ON/OFF button/knob again.
If another audio source is selected, the
pause function is turned off.
CODE CARD
This document certifies ownership of the
car radio. The Code Card contains the
model of the radio and the serial number.
IMPORTANT Keep the Code Card some-
where safe so that the authorities can be
supplied with the relevant information if
the radio is stolen.
603_97_412 Radio FunPanda EN:MY 09 9-10-2009 13:44 Pagina 18
