2009 FIAT PANDA maintenance

9
FIAT PANDA LPG
SOLENOID VALVES
AND SAFETY DEVICES
The system has a solenoid valve located
on the pressure reduction unit and a so-
lenoid valve fitted inside the multiple valve
assembly on the tank.
The main function of these solenoid valves
is to interrupt/allow the flow of LPG to
the supply circuit.
The solenoid valves are open when:
– a request to run on LPG has been made;
– the optimum engine conditions are sat-
isfied (engine coolant temperature, mini-
mum revs level) for running on LPG;– there is enough LGP in the tank for op-
eration;
– the inertia switch has not been tripped.
The multivalve assembly fitted on the tank
includes:
– a valve that automatically stops the sup-
ply of LPG when the maximum permitted
filling level is reached (80% of the total
tank capacity);
– a flow limiter which, if a pipe is broken,
prevents the complete and sudden escape
of LPG;
– a one-way valve, located on the gas re-
turn pipe in the tank, which prevents LPG
reflux;
– a safety solenoid valve on the LPG sup-
ply, which either gives the go ahead or
prevents the escape of gas to the pressure
reduction unit; – a manual tap, upstream of the solenoid
valve, that separates the tank from the
LPG system to allow maintenance opera-
tions;
– a fuse pad which, in the event of
overheating (temperature above 120 °C),
totally eliminates the danger of excess
pressure making the LPG in the tank flow
out as quickly as possible in a controlled
manner;
– an analogue gauge showing the level of
LPG in the tank.
603_97_595GB PANDA GPL Euro 5 16-12-2009 12:58 Pagina 9

21
FIAT PANDA LPG
supply pressures of pumps in the net-
work, pumps with different sup-
ply/stop specifications, tank not com-
pletely in reserve condition.
It should be remembered that when using
a fuel such as LPG the range is very vari-
able because, as well as driving and car
maintenance conditions, it also depends
on the different composition of the gas
which can vary not only seasonally but al-
so from supplier to supplier. LPG is, in ef-
fect, a composition of gas (butane and
propane) mixed in a way that may not be
standardized.
BOOT CAPACITY
Capacity with vehicle unladen (V.D.A. standards) in dm3
One-piece and split rear seat
Under rear parcel shelf with rear backrest in normal position
To waist level with rear backrest folded over
Max. to the roof with rear backrest folded over
Max. to the roof with rear backrest folded over (with sun roof)
Volume of the load carrying compartment (2-seater VAN version)
Volume of the load carrying compartment (4-seater VAN version)187
471
841
796
1000
256
CAPACITIES
Petrol
Petrol . . . . . . . . . . . . . . . . . litres 35
– including a reserve of . . . litres 5
LPG
– maximum refuelling
capacity (*) . . . . . . . litres 31/27 (▲)
(▲) VAN version
(*) The value already takes into account
the 80% filling limit of the tank and the
residual fluid necessary for the priming and
is the maximum permitted refilling. This
value may undergo slight changes
from one refilling operation to the
next due to: differences between the The trip meter indication on range is indica-
tive and refers to petrol operation only.
During LPG operation, the Instant con-
sumption and Average consumption read-
ings are not significant, whereas all other
functions remain valid.
IMPORTANT Only use LPG for mo-
tor vehicles.
603_97_595GB PANDA GPL Euro 5 16-12-2009 12:58 Pagina 21

CO2EMISSIONS
The CO2emission figures in the table below refer to combined fuel consumption.
According to the current
European Directive (g/km)
LPG . . . . . . . . . . . . . . . . . . . . . . . . . 114
Petrol . . . . . . . . . . . . . . . . . . . . . . . 129
FLUIDS AND LUBRICANTS
CHARACTERISTICS OF PRODUCTS
Use Quality specifications of fluids and lubricants Fluids and lubricants Interval
for correct car operation original replacements
Lubricants
for petrol/
LPG-engines
For petrol engines running on LPG, we recommend using the original product formulated specifically for the type of use.
The use of products with specifications below ACEA C3 – SAE 5W-40 could cause damage to the engine not covered
by the warranty.According to annual
maintenance and in-
spection schedule
SELENIA
MULTIPOWER
GAS 5W-40
Contractual
Technical Reference
N° F922.E09
SAE 5W-40 ACEA C3
grade totally synthetic lubricant.
FIAT 9.55535-T2specification
23
FIAT PANDA LPG
603_97_595GB PANDA GPL Euro 5 16-12-2009 12:58 Pagina 23